McAfee-Secured Website

Exam Code: NGFW-Engineer

Exam Name: Palo Alto Networks Certified Next-Generation Firewall Engineer

Certification Provider: Palo Alto Networks

Corresponding Certification: Palo Alto Networks Certified Next-Generation Firewall Engineer

100% Palo Alto Networks NGFW-Engineer Guaranteed Success With Testking Training Materials

Get Real NGFW-Engineer Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

143 Questions & Answers with Testing Engine

"Palo Alto Networks Certified Next-Generation Firewall Engineer Exam", also known as NGFW-Engineer exam, is a Palo Alto Networks certification exam.

Pass your tests with the always up-to-date NGFW-Engineer Exam Engine. Your NGFW-Engineer training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Palo Alto Networks NGFW-Engineer Practice Test 9

Question 80

During a scheduled deployment at a mining operations site in Salt Lake City, an administrator assumes an intrazone-default permit also permits traffic to an unrelated zone. The team is verifying its effect on sensor telemetry. Which acceptance outcome addresses the precise requirement?

  1. In-zone traffic follows the intrazone rule and cross-zone traffic follows the explicit allowed or denied interzone rule
  2. An allowed directory user authenticates and a user outside the group is denied
  3. Finance-to-guest test traffic is evaluated by the intended deny policy instead of intrazone default behavior
  4. Session logs identify the correct source/destination zones and only the approved applications are permitted

Explanation

Correct Answer

A:

At a mining operations site in Salt Lake City, this verifies the specific security zones requirement rather than merely recording an intended configuration: In-zone traffic follows the intrazone rule and cross-zone traffic follows the explicit allowed or denied interzone rule. The associated implementation is: create a deliberate interzone Security policy with needed applications/services and logging.

Incorrect Answers

B:

That observation measures globalprotect authentication after this other intervention: Enforce the intended authentication profile and user/group allowlist on the GlobalProtect gateway. Its result is: An allowed directory user authenticates and a user outside the group is denied. The requested security zones change is Create a deliberate interzone Security policy with needed applications/services and logging, which must demonstrate: In-zone traffic follows the intrazone rule and cross-zone traffic follows the explicit allowed or denied interzone rule. The offered evidence does not validate the specified control.

C:

The offered observation would confirm the separate intervention: Separate the interfaces into appropriate security zones and apply explicit interzone controls. It measures: Finance-to-guest test traffic is evaluated by the intended deny policy instead of intrazone default behavior. The current security zones configuration is Create a deliberate interzone Security policy with needed applications/services and logging, and must demonstrate: In-zone traffic follows the intrazone rule and cross-zone traffic follows the explicit allowed or denied interzone rule. The two acceptance checks are not interchangeable even though they share a feature area.

D:

The offered observation would confirm the separate intervention: Assign the interface to the intended source zone and add an explicit cross-zone policy. It measures: Session logs identify the correct source/destination zones and only the approved applications are permitted. The current security zones configuration is Create a deliberate interzone Security policy with needed applications/services and logging, and must demonstrate: In-zone traffic follows the intrazone rule and cross-zone traffic follows the explicit allowed or denied interzone rule. The two acceptance checks are not interchangeable even though they share a feature area.

Question 81

At a public university network in Madison, an active/active HA deployment uses two peers but has not assigned their required distinct device IDs. The change affects learning systems. Which configuration step most directly meets the stated requirement?

  1. Configure the supported active/active HA identities and networking prerequisites consistently
  2. Configure supported HA path monitoring to test the remote target rather than relying only on link state
  3. Resolve the documented HA compatibility and synchronization prerequisites before testing failover
  4. Design supported HA peer links and session synchronization, not just duplicate uplinks

Explanation

Correct Answer

A:

At a public university network in Madison, this directly addresses active/active ha at the described site: Configure the supported active/active HA identities and networking prerequisites consistently. The acceptance check is concrete: both peers appear in the intended active/active state and session ownership behaves as designed under failover.

Incorrect Answers

B:

The alternative would configure supported HA path monitoring to test the remote target rather than relying only on link state to address link and path monitoring. Its acceptance test is: Controlled loss of gateway reachability triggers the defined path-failure and HA response. This case instead requires active/active ha, implemented by configure the supported active/active HA identities and networking prerequisites consistently; the deciding test is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The alternate control does not establish the requested outcome.

C:

The alternative would resolve the documented HA compatibility and synchronization prerequisites before testing failover to address active/passive ha. Its acceptance test is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. This case instead requires active/active ha, implemented by configure the supported active/active HA identities and networking prerequisites consistently; the deciding test is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The alternate control does not establish the requested outcome.

D:

The alternative would design supported HA peer links and session synchronization, not just duplicate uplinks; its own acceptance check is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. Although both choices involve active/active ha, this case requires the intervention: Configure the supported active/active HA identities and networking prerequisites consistently. Its required outcome is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The first test could pass while this distinct configuration remains unverified.

Question 82

At a public university network in Madison, an active/active HA deployment uses two peers but has not assigned their required distinct device IDs. The change affects learning systems. What should the team verify before closing the change?

  1. Both peers appear in the intended active/active state and session ownership behaves as designed under failover
  2. Disconnecting that uplink produces the expected HA event and moves service to the healthy peer
  3. HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests
  4. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit

Explanation

Correct Answer

A:

At a public university network in Madison, this verifies the specific active/active ha requirement rather than merely recording an intended configuration: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The associated implementation is: configure the supported active/active HA identities and networking prerequisites consistently.

Incorrect Answers

B:

That observation measures link and path monitoring after this other intervention: Configure HA link monitoring for the business-critical uplink with an appropriate failure response. Its result is: Disconnecting that uplink produces the expected HA event and moves service to the healthy peer. The requested active/active ha change is Configure the supported active/active HA identities and networking prerequisites consistently, which must demonstrate: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The offered evidence does not validate the specified control.

C:

The offered observation would confirm the separate intervention: Design supported HA peer links and session synchronization, not just duplicate uplinks. It measures: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The current active/active ha configuration is Configure the supported active/active HA identities and networking prerequisites consistently, and must demonstrate: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The two acceptance checks are not interchangeable even though they share a feature area.

D:

That observation measures active/passive ha after this other intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. Its result is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The requested active/active ha change is Configure the supported active/active HA identities and networking prerequisites consistently, which must demonstrate: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The offered evidence does not validate the specified control.

Question 83

During a scheduled deployment at a legal services firm in Atlanta, an active/active HA deployment uses two peers but has not assigned their required distinct device IDs. The team is verifying its effect on case files. What is the most appropriate deployment choice for this case?

  1. Provide the required HA data synchronization interface/path for the selected platform and mode
  2. Design supported HA peer links and session synchronization, not just duplicate uplinks
  3. Configure the supported active/active HA identities and networking prerequisites consistently
  4. Configure active/passive HA with working HA1/HA2 paths and configuration synchronization

Explanation

Correct Answer

C:

At a legal services firm in Atlanta, this directly addresses active/active ha at the described site: Configure the supported active/active HA identities and networking prerequisites consistently. The acceptance check is concrete: both peers appear in the intended active/active state and session ownership behaves as designed under failover.

Incorrect Answers

A:

The alternative would provide the required HA data synchronization interface/path for the selected platform and mode to address active/passive ha. Its acceptance test is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. This case instead requires active/active ha, implemented by configure the supported active/active HA identities and networking prerequisites consistently; the deciding test is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The alternate control does not establish the requested outcome.

B:

The alternative would design supported HA peer links and session synchronization, not just duplicate uplinks; its own acceptance check is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. Although both choices involve active/active ha, this case requires the intervention: Configure the supported active/active HA identities and networking prerequisites consistently. Its required outcome is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The first test could pass while this distinct configuration remains unverified.

D:

The alternative would configure active/passive HA with working HA1/HA2 paths and configuration synchronization to address active/passive ha. Its acceptance test is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. This case instead requires active/active ha, implemented by configure the supported active/active HA identities and networking prerequisites consistently; the deciding test is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The alternate control does not establish the requested outcome.

Question 84

During a scheduled deployment at a legal services firm in Atlanta, an active/active HA deployment uses two peers but has not assigned their required distinct device IDs. The team is verifying its effect on case files. Which post-change observation validates the requirement?

  1. HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests
  2. Both peers appear in the intended active/active state and session ownership behaves as designed under failover
  3. Disconnecting that uplink produces the expected HA event and moves service to the healthy peer
  4. Transient missed probes no longer cause an unwanted HA transition, but sustained failure does

Explanation

Correct Answer

B:

At a legal services firm in Atlanta, this verifies the specific active/active ha requirement rather than merely recording an intended configuration: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The associated implementation is: configure the supported active/active HA identities and networking prerequisites consistently.

Incorrect Answers

A:

The offered observation would confirm the separate intervention: Design supported HA peer links and session synchronization, not just duplicate uplinks. It measures: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The current active/active ha configuration is Configure the supported active/active HA identities and networking prerequisites consistently, and must demonstrate: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The two acceptance checks are not interchangeable even though they share a feature area.

C:

That observation measures link and path monitoring after this other intervention: Configure HA link monitoring for the business-critical uplink with an appropriate failure response. Its result is: Disconnecting that uplink produces the expected HA event and moves service to the healthy peer. The requested active/active ha change is Configure the supported active/active HA identities and networking prerequisites consistently, which must demonstrate: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The offered evidence does not validate the specified control.

D:

That observation measures link and path monitoring after this other intervention: Adjust failure thresholds and probe targets to match the documented tolerance. Its result is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. The requested active/active ha change is Configure the supported active/active HA identities and networking prerequisites consistently, which must demonstrate: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The offered evidence does not validate the specified control.

Question 85

At a commercial data center in San Jose, a planned active/active configuration is proposed solely to replace two independent ISPs with no shared HA state. The change affects business applications. Which proposed change is most directly applicable?

  1. Configure the supported active/active HA identities and networking prerequisites consistently
  2. Configure supported HA path monitoring to test the remote target rather than relying only on link state
  3. Provide the required HA data synchronization interface/path for the selected platform and mode
  4. Design supported HA peer links and session synchronization, not just duplicate uplinks

Explanation

Correct Answer

D:

At a commercial data center in San Jose, this directly addresses active/active ha at the described site: Design supported HA peer links and session synchronization, not just duplicate uplinks. The acceptance check is concrete: hA synchronization and traffic-owner state are observable on both peers during controlled traffic tests.

Incorrect Answers

A:

The alternative would configure the supported active/active HA identities and networking prerequisites consistently; its own acceptance check is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. Although both choices involve active/active ha, this case requires the intervention: Design supported HA peer links and session synchronization, not just duplicate uplinks. Its required outcome is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The first test could pass while this distinct configuration remains unverified.

B:

The alternative would configure supported HA path monitoring to test the remote target rather than relying only on link state to address link and path monitoring. Its acceptance test is: Controlled loss of gateway reachability triggers the defined path-failure and HA response. This case instead requires active/active ha, implemented by design supported HA peer links and session synchronization, not just duplicate uplinks; the deciding test is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The alternate control does not establish the requested outcome.

C:

The alternative would provide the required HA data synchronization interface/path for the selected platform and mode to address active/passive ha. Its acceptance test is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. This case instead requires active/active ha, implemented by design supported HA peer links and session synchronization, not just duplicate uplinks; the deciding test is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The alternate control does not establish the requested outcome.

Question 86

At a commercial data center in San Jose, a planned active/active configuration is proposed solely to replace two independent ISPs with no shared HA state. The change affects business applications. What should the validation team check after the change?

  1. HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests
  2. Disconnecting that uplink produces the expected HA event and moves service to the healthy peer
  3. Controlled loss of gateway reachability triggers the defined path-failure and HA response
  4. Both peers appear in the intended active/active state and session ownership behaves as designed under failover

Explanation

Correct Answer

A:

At a commercial data center in San Jose, this verifies the specific active/active ha requirement rather than merely recording an intended configuration: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The associated implementation is: design supported HA peer links and session synchronization, not just duplicate uplinks.

Incorrect Answers

B:

That observation measures link and path monitoring after this other intervention: Configure HA link monitoring for the business-critical uplink with an appropriate failure response. Its result is: Disconnecting that uplink produces the expected HA event and moves service to the healthy peer. The requested active/active ha change is Design supported HA peer links and session synchronization, not just duplicate uplinks, which must demonstrate: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The offered evidence does not validate the specified control.

C:

That observation measures link and path monitoring after this other intervention: Configure supported HA path monitoring to test the remote target rather than relying only on link state. Its result is: Controlled loss of gateway reachability triggers the defined path-failure and HA response. The requested active/active ha change is Design supported HA peer links and session synchronization, not just duplicate uplinks, which must demonstrate: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The offered evidence does not validate the specified control.

D:

The offered observation would confirm the separate intervention: Configure the supported active/active HA identities and networking prerequisites consistently. It measures: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The current active/active ha configuration is Design supported HA peer links and session synchronization, not just duplicate uplinks, and must demonstrate: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The two acceptance checks are not interchangeable even though they share a feature area.

Question 87

During a scheduled deployment at an insurance provider in Denver, a planned active/active configuration is proposed solely to replace two independent ISPs with no shared HA state. The team is verifying its effect on claims services. What should the implementation plan specify?

  1. Design supported HA peer links and session synchronization, not just duplicate uplinks
  2. Configure the supported active/active HA identities and networking prerequisites consistently
  3. Configure HA link monitoring for the business-critical uplink with an appropriate failure response
  4. Adjust failure thresholds and probe targets to match the documented tolerance

Explanation

Correct Answer

A:

At an insurance provider in Denver, this directly addresses active/active ha at the described site: Design supported HA peer links and session synchronization, not just duplicate uplinks. The acceptance check is concrete: hA synchronization and traffic-owner state are observable on both peers during controlled traffic tests.

Incorrect Answers

B:

The alternative would configure the supported active/active HA identities and networking prerequisites consistently; its own acceptance check is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. Although both choices involve active/active ha, this case requires the intervention: Design supported HA peer links and session synchronization, not just duplicate uplinks. Its required outcome is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The first test could pass while this distinct configuration remains unverified.

C:

The alternative would configure HA link monitoring for the business-critical uplink with an appropriate failure response to address link and path monitoring. Its acceptance test is: Disconnecting that uplink produces the expected HA event and moves service to the healthy peer. This case instead requires active/active ha, implemented by design supported HA peer links and session synchronization, not just duplicate uplinks; the deciding test is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The alternate control does not establish the requested outcome.

D:

The alternative would adjust failure thresholds and probe targets to match the documented tolerance to address link and path monitoring. Its acceptance test is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. This case instead requires active/active ha, implemented by design supported HA peer links and session synchronization, not just duplicate uplinks; the deciding test is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The alternate control does not establish the requested outcome.

Question 88

During a scheduled deployment at an insurance provider in Denver, a planned active/active configuration is proposed solely to replace two independent ISPs with no shared HA state. The team is verifying its effect on claims services. Which observable result is the strongest acceptance evidence?

  1. Both peers appear in the intended active/active state and session ownership behaves as designed under failover
  2. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit
  3. Session sync indicators are healthy and established permitted traffic survives the supported failover test
  4. HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests

Explanation

Correct Answer

D:

At an insurance provider in Denver, this verifies the specific active/active ha requirement rather than merely recording an intended configuration: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The associated implementation is: design supported HA peer links and session synchronization, not just duplicate uplinks.

Incorrect Answers

A:

The offered observation would confirm the separate intervention: Configure the supported active/active HA identities and networking prerequisites consistently. It measures: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. The current active/active ha configuration is Design supported HA peer links and session synchronization, not just duplicate uplinks, and must demonstrate: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The two acceptance checks are not interchangeable even though they share a feature area.

B:

That observation measures active/passive ha after this other intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. Its result is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The requested active/active ha change is Design supported HA peer links and session synchronization, not just duplicate uplinks, which must demonstrate: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The offered evidence does not validate the specified control.

C:

That observation measures active/passive ha after this other intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. Its result is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The requested active/active ha change is Design supported HA peer links and session synchronization, not just duplicate uplinks, which must demonstrate: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The offered evidence does not validate the specified control.

Question 89

At a telecommunications exchange in Dallas, a primary firewall must fail over to a synchronized peer during an appliance shutdown. The change affects voice services. Which change best satisfies the actual network-security requirement?

  1. Design supported HA peer links and session synchronization, not just duplicate uplinks
  2. Resolve the documented HA compatibility and synchronization prerequisites before testing failover
  3. Configure active/passive HA with working HA1/HA2 paths and configuration synchronization
  4. Provide the required HA data synchronization interface/path for the selected platform and mode

Explanation

Correct Answer

C:

At a telecommunications exchange in Dallas, this directly addresses active/passive ha at the described site: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. The acceptance check is concrete: the passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit.

Incorrect Answers

A:

The alternative would design supported HA peer links and session synchronization, not just duplicate uplinks to address active/active ha. Its acceptance test is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. This case instead requires active/passive ha, implemented by configure active/passive HA with working HA1/HA2 paths and configuration synchronization; the deciding test is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The alternate control does not establish the requested outcome.

B:

The alternative would resolve the documented HA compatibility and synchronization prerequisites before testing failover; its own acceptance check is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. Although both choices involve active/passive ha, this case requires the intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. Its required outcome is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The first test could pass while this distinct configuration remains unverified.

D:

The alternative would provide the required HA data synchronization interface/path for the selected platform and mode; its own acceptance check is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. Although both choices involve active/passive ha, this case requires the intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. Its required outcome is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The first test could pass while this distinct configuration remains unverified.

Question 90

At a telecommunications exchange in Dallas, a primary firewall must fail over to a synchronized peer during an appliance shutdown. The change affects voice services. What outcome directly proves this configuration works?

  1. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit
  2. HA status shows synchronized peers and compatible software/content state without synchronization alarms
  3. Disconnecting that uplink produces the expected HA event and moves service to the healthy peer
  4. Session sync indicators are healthy and established permitted traffic survives the supported failover test

Explanation

Correct Answer

A:

At a telecommunications exchange in Dallas, this verifies the specific active/passive ha requirement rather than merely recording an intended configuration: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The associated implementation is: configure active/passive HA with working HA1/HA2 paths and configuration synchronization.

Incorrect Answers

B:

The offered observation would confirm the separate intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. It measures: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The current active/passive ha configuration is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, and must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The two acceptance checks are not interchangeable even though they share a feature area.

C:

That observation measures link and path monitoring after this other intervention: Configure HA link monitoring for the business-critical uplink with an appropriate failure response. Its result is: Disconnecting that uplink produces the expected HA event and moves service to the healthy peer. The requested active/passive ha change is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, which must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The offered evidence does not validate the specified control.

D:

The offered observation would confirm the separate intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. It measures: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The current active/passive ha configuration is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, and must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The two acceptance checks are not interchangeable even though they share a feature area.

Palo Alto Networks Certified Next-Generation Firewall Engineer (NGFW-Engineer) Practice Tests