McAfee-Secured Website

Exam Code: NGFW-Engineer

Exam Name: Palo Alto Networks Certified Next-Generation Firewall Engineer

Certification Provider: Palo Alto Networks

Corresponding Certification: Palo Alto Networks Certified Next-Generation Firewall Engineer

100% Palo Alto Networks NGFW-Engineer Guaranteed Success With Testking Training Materials

Get Real NGFW-Engineer Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

143 Questions & Answers with Testing Engine

"Palo Alto Networks Certified Next-Generation Firewall Engineer Exam", also known as NGFW-Engineer exam, is a Palo Alto Networks certification exam.

Pass your tests with the always up-to-date NGFW-Engineer Exam Engine. Your NGFW-Engineer training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Palo Alto Networks NGFW-Engineer Practice Test 10

Question 90

At a telecommunications exchange in Dallas, a primary firewall must fail over to a synchronized peer during an appliance shutdown. The change affects voice services. What outcome directly proves this configuration works?

  1. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit
  2. HA status shows synchronized peers and compatible software/content state without synchronization alarms
  3. Disconnecting that uplink produces the expected HA event and moves service to the healthy peer
  4. Session sync indicators are healthy and established permitted traffic survives the supported failover test

Explanation

Correct Answer

A:

At a telecommunications exchange in Dallas, this verifies the specific active/passive ha requirement rather than merely recording an intended configuration: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The associated implementation is: configure active/passive HA with working HA1/HA2 paths and configuration synchronization.

Incorrect Answers

B:

The offered observation would confirm the separate intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. It measures: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The current active/passive ha configuration is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, and must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The two acceptance checks are not interchangeable even though they share a feature area.

C:

That observation measures link and path monitoring after this other intervention: Configure HA link monitoring for the business-critical uplink with an appropriate failure response. Its result is: Disconnecting that uplink produces the expected HA event and moves service to the healthy peer. The requested active/passive ha change is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, which must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The offered evidence does not validate the specified control.

D:

The offered observation would confirm the separate intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. It measures: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The current active/passive ha configuration is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, and must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The two acceptance checks are not interchangeable even though they share a feature area.

Question 91

During a scheduled deployment at a government contractor in Arlington, a primary firewall must fail over to a synchronized peer during an appliance shutdown. The team is verifying its effect on project systems. How should the engineer address the stated constraint?

  1. Resolve the documented HA compatibility and synchronization prerequisites before testing failover
  2. Configure the supported active/active HA identities and networking prerequisites consistently
  3. Provide the required HA data synchronization interface/path for the selected platform and mode
  4. Configure active/passive HA with working HA1/HA2 paths and configuration synchronization

Explanation

Correct Answer

D:

At a government contractor in Arlington, this directly addresses active/passive ha at the described site: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. The acceptance check is concrete: the passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit.

Incorrect Answers

A:

The alternative would resolve the documented HA compatibility and synchronization prerequisites before testing failover; its own acceptance check is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. Although both choices involve active/passive ha, this case requires the intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. Its required outcome is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The first test could pass while this distinct configuration remains unverified.

B:

The alternative would configure the supported active/active HA identities and networking prerequisites consistently to address active/active ha. Its acceptance test is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. This case instead requires active/passive ha, implemented by configure active/passive HA with working HA1/HA2 paths and configuration synchronization; the deciding test is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The alternate control does not establish the requested outcome.

C:

The alternative would provide the required HA data synchronization interface/path for the selected platform and mode; its own acceptance check is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. Although both choices involve active/passive ha, this case requires the intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. Its required outcome is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The first test could pass while this distinct configuration remains unverified.

Question 92

During a scheduled deployment at a government contractor in Arlington, a primary firewall must fail over to a synchronized peer during an appliance shutdown. The team is verifying its effect on project systems. Which test result best supports completion?

  1. Session sync indicators are healthy and established permitted traffic survives the supported failover test
  2. Transient missed probes no longer cause an unwanted HA transition, but sustained failure does
  3. HA status shows synchronized peers and compatible software/content state without synchronization alarms
  4. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit

Explanation

Correct Answer

D:

At a government contractor in Arlington, this verifies the specific active/passive ha requirement rather than merely recording an intended configuration: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The associated implementation is: configure active/passive HA with working HA1/HA2 paths and configuration synchronization.

Incorrect Answers

A:

The offered observation would confirm the separate intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. It measures: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The current active/passive ha configuration is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, and must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The two acceptance checks are not interchangeable even though they share a feature area.

B:

That observation measures link and path monitoring after this other intervention: Adjust failure thresholds and probe targets to match the documented tolerance. Its result is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. The requested active/passive ha change is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, which must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The offered evidence does not validate the specified control.

C:

The offered observation would confirm the separate intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. It measures: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The current active/passive ha configuration is Configure active/passive HA with working HA1/HA2 paths and configuration synchronization, and must demonstrate: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The two acceptance checks are not interchangeable even though they share a feature area.

Question 93

At a retail distribution center in Columbus, an HA peer has mismatched software/content state and does not synchronize cleanly. The change affects order processing. Which adjustment should be part of the approved fix?

  1. Resolve the documented HA compatibility and synchronization prerequisites before testing failover
  2. Configure active/passive HA with working HA1/HA2 paths and configuration synchronization
  3. Provide the required HA data synchronization interface/path for the selected platform and mode
  4. Design supported HA peer links and session synchronization, not just duplicate uplinks

Explanation

Correct Answer

A:

At a retail distribution center in Columbus, this directly addresses active/passive ha at the described site: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. The acceptance check is concrete: hA status shows synchronized peers and compatible software/content state without synchronization alarms.

Incorrect Answers

B:

The alternative would configure active/passive HA with working HA1/HA2 paths and configuration synchronization; its own acceptance check is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. Although both choices involve active/passive ha, this case requires the intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. Its required outcome is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The first test could pass while this distinct configuration remains unverified.

C:

The alternative would provide the required HA data synchronization interface/path for the selected platform and mode; its own acceptance check is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. Although both choices involve active/passive ha, this case requires the intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. Its required outcome is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The first test could pass while this distinct configuration remains unverified.

D:

The alternative would design supported HA peer links and session synchronization, not just duplicate uplinks to address active/active ha. Its acceptance test is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. This case instead requires active/passive ha, implemented by resolve the documented HA compatibility and synchronization prerequisites before testing failover; the deciding test is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The alternate control does not establish the requested outcome.

Question 94

At a retail distribution center in Columbus, an HA peer has mismatched software/content state and does not synchronize cleanly. The change affects order processing. What observed behavior matters most for signoff?

  1. HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests
  2. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit
  3. Session sync indicators are healthy and established permitted traffic survives the supported failover test
  4. HA status shows synchronized peers and compatible software/content state without synchronization alarms

Explanation

Correct Answer

D:

At a retail distribution center in Columbus, this verifies the specific active/passive ha requirement rather than merely recording an intended configuration: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The associated implementation is: resolve the documented HA compatibility and synchronization prerequisites before testing failover.

Incorrect Answers

A:

That observation measures active/active ha after this other intervention: Design supported HA peer links and session synchronization, not just duplicate uplinks. Its result is: HA synchronization and traffic-owner state are observable on both peers during controlled traffic tests. The requested active/passive ha change is Resolve the documented HA compatibility and synchronization prerequisites before testing failover, which must demonstrate: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The offered evidence does not validate the specified control.

B:

The offered observation would confirm the separate intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. It measures: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The current active/passive ha configuration is Resolve the documented HA compatibility and synchronization prerequisites before testing failover, and must demonstrate: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The two acceptance checks are not interchangeable even though they share a feature area.

C:

The offered observation would confirm the separate intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. It measures: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The current active/passive ha configuration is Resolve the documented HA compatibility and synchronization prerequisites before testing failover, and must demonstrate: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The two acceptance checks are not interchangeable even though they share a feature area.

Question 95

During a scheduled deployment at a transportation depot in Chicago, an HA peer has mismatched software/content state and does not synchronize cleanly. The team is verifying its effect on dispatch services. What should the engineer configure first to address this gap?

  1. Configure active/passive HA with working HA1/HA2 paths and configuration synchronization
  2. Provide the required HA data synchronization interface/path for the selected platform and mode
  3. Adjust failure thresholds and probe targets to match the documented tolerance
  4. Resolve the documented HA compatibility and synchronization prerequisites before testing failover

Explanation

Correct Answer

D:

At a transportation depot in Chicago, this directly addresses active/passive ha at the described site: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. The acceptance check is concrete: hA status shows synchronized peers and compatible software/content state without synchronization alarms.

Incorrect Answers

A:

The alternative would configure active/passive HA with working HA1/HA2 paths and configuration synchronization; its own acceptance check is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. Although both choices involve active/passive ha, this case requires the intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. Its required outcome is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The first test could pass while this distinct configuration remains unverified.

B:

The alternative would provide the required HA data synchronization interface/path for the selected platform and mode; its own acceptance check is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. Although both choices involve active/passive ha, this case requires the intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. Its required outcome is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The first test could pass while this distinct configuration remains unverified.

C:

The alternative would adjust failure thresholds and probe targets to match the documented tolerance to address link and path monitoring. Its acceptance test is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. This case instead requires active/passive ha, implemented by resolve the documented HA compatibility and synchronization prerequisites before testing failover; the deciding test is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The alternate control does not establish the requested outcome.

Question 96

During a scheduled deployment at a transportation depot in Chicago, an HA peer has mismatched software/content state and does not synchronize cleanly. The team is verifying its effect on dispatch services. Which measurement best confirms the intended result?

  1. Transient missed probes no longer cause an unwanted HA transition, but sustained failure does
  2. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit
  3. Session sync indicators are healthy and established permitted traffic survives the supported failover test
  4. HA status shows synchronized peers and compatible software/content state without synchronization alarms

Explanation

Correct Answer

D:

At a transportation depot in Chicago, this verifies the specific active/passive ha requirement rather than merely recording an intended configuration: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The associated implementation is: resolve the documented HA compatibility and synchronization prerequisites before testing failover.

Incorrect Answers

A:

That observation measures link and path monitoring after this other intervention: Adjust failure thresholds and probe targets to match the documented tolerance. Its result is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. The requested active/passive ha change is Resolve the documented HA compatibility and synchronization prerequisites before testing failover, which must demonstrate: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The offered evidence does not validate the specified control.

B:

The offered observation would confirm the separate intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. It measures: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The current active/passive ha configuration is Resolve the documented HA compatibility and synchronization prerequisites before testing failover, and must demonstrate: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The two acceptance checks are not interchangeable even though they share a feature area.

C:

The offered observation would confirm the separate intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. It measures: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The current active/passive ha configuration is Resolve the documented HA compatibility and synchronization prerequisites before testing failover, and must demonstrate: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The two acceptance checks are not interchangeable even though they share a feature area.

Question 97

At a food supply company in Sacramento, a pair uses an HA control connection but no dedicated state-synchronization path for session handoff. The change affects warehouse automation. Which action closes the described technical configuration gap?

  1. Provide the required HA data synchronization interface/path for the selected platform and mode
  2. Configure the supported active/active HA identities and networking prerequisites consistently
  3. Resolve the documented HA compatibility and synchronization prerequisites before testing failover
  4. Configure active/passive HA with working HA1/HA2 paths and configuration synchronization

Explanation

Correct Answer

A:

At a food supply company in Sacramento, this directly addresses active/passive ha at the described site: Provide the required HA data synchronization interface/path for the selected platform and mode. The acceptance check is concrete: session sync indicators are healthy and established permitted traffic survives the supported failover test.

Incorrect Answers

B:

The alternative would configure the supported active/active HA identities and networking prerequisites consistently to address active/active ha. Its acceptance test is: Both peers appear in the intended active/active state and session ownership behaves as designed under failover. This case instead requires active/passive ha, implemented by provide the required HA data synchronization interface/path for the selected platform and mode; the deciding test is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The alternate control does not establish the requested outcome.

C:

The alternative would resolve the documented HA compatibility and synchronization prerequisites before testing failover; its own acceptance check is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. Although both choices involve active/passive ha, this case requires the intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. Its required outcome is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The first test could pass while this distinct configuration remains unverified.

D:

The alternative would configure active/passive HA with working HA1/HA2 paths and configuration synchronization; its own acceptance check is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. Although both choices involve active/passive ha, this case requires the intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. Its required outcome is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The first test could pass while this distinct configuration remains unverified.

Question 98

At a food supply company in Sacramento, a pair uses an HA control connection but no dedicated state-synchronization path for session handoff. The change affects warehouse automation. What evidence would demonstrate success without relying on a saved setting alone?

  1. HA status shows synchronized peers and compatible software/content state without synchronization alarms
  2. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit
  3. Session sync indicators are healthy and established permitted traffic survives the supported failover test
  4. Transient missed probes no longer cause an unwanted HA transition, but sustained failure does

Explanation

Correct Answer

C:

At a food supply company in Sacramento, this verifies the specific active/passive ha requirement rather than merely recording an intended configuration: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The associated implementation is: provide the required HA data synchronization interface/path for the selected platform and mode.

Incorrect Answers

A:

The offered observation would confirm the separate intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. It measures: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The current active/passive ha configuration is Provide the required HA data synchronization interface/path for the selected platform and mode, and must demonstrate: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The two acceptance checks are not interchangeable even though they share a feature area.

B:

The offered observation would confirm the separate intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. It measures: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The current active/passive ha configuration is Provide the required HA data synchronization interface/path for the selected platform and mode, and must demonstrate: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The two acceptance checks are not interchangeable even though they share a feature area.

D:

That observation measures link and path monitoring after this other intervention: Adjust failure thresholds and probe targets to match the documented tolerance. Its result is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. The requested active/passive ha change is Provide the required HA data synchronization interface/path for the selected platform and mode, which must demonstrate: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The offered evidence does not validate the specified control.

Question 99

During a scheduled deployment at a municipal IT division in Portland, a pair uses an HA control connection but no dedicated state-synchronization path for session handoff. The team is verifying its effect on citizen portals. What configuration decision is supported by the stated facts?

  1. Provide the required HA data synchronization interface/path for the selected platform and mode
  2. Adjust failure thresholds and probe targets to match the documented tolerance
  3. Resolve the documented HA compatibility and synchronization prerequisites before testing failover
  4. Configure active/passive HA with working HA1/HA2 paths and configuration synchronization

Explanation

Correct Answer

A:

At a municipal IT division in Portland, this directly addresses active/passive ha at the described site: Provide the required HA data synchronization interface/path for the selected platform and mode. The acceptance check is concrete: session sync indicators are healthy and established permitted traffic survives the supported failover test.

Incorrect Answers

B:

The alternative would adjust failure thresholds and probe targets to match the documented tolerance to address link and path monitoring. Its acceptance test is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. This case instead requires active/passive ha, implemented by provide the required HA data synchronization interface/path for the selected platform and mode; the deciding test is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The alternate control does not establish the requested outcome.

C:

The alternative would resolve the documented HA compatibility and synchronization prerequisites before testing failover; its own acceptance check is: HA status shows synchronized peers and compatible software/content state without synchronization alarms. Although both choices involve active/passive ha, this case requires the intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. Its required outcome is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The first test could pass while this distinct configuration remains unverified.

D:

The alternative would configure active/passive HA with working HA1/HA2 paths and configuration synchronization; its own acceptance check is: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. Although both choices involve active/passive ha, this case requires the intervention: Provide the required HA data synchronization interface/path for the selected platform and mode. Its required outcome is: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The first test could pass while this distinct configuration remains unverified.

Question 100

During a scheduled deployment at a municipal IT division in Portland, a pair uses an HA control connection but no dedicated state-synchronization path for session handoff. The team is verifying its effect on citizen portals. Which acceptance outcome addresses the precise requirement?

  1. The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit
  2. Transient missed probes no longer cause an unwanted HA transition, but sustained failure does
  3. Session sync indicators are healthy and established permitted traffic survives the supported failover test
  4. HA status shows synchronized peers and compatible software/content state without synchronization alarms

Explanation

Correct Answer

C:

At a municipal IT division in Portland, this verifies the specific active/passive ha requirement rather than merely recording an intended configuration: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The associated implementation is: provide the required HA data synchronization interface/path for the selected platform and mode.

Incorrect Answers

A:

The offered observation would confirm the separate intervention: Configure active/passive HA with working HA1/HA2 paths and configuration synchronization. It measures: The passive peer takes over after the active unit is isolated and allowed traffic resumes through the surviving unit. The current active/passive ha configuration is Provide the required HA data synchronization interface/path for the selected platform and mode, and must demonstrate: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The two acceptance checks are not interchangeable even though they share a feature area.

B:

That observation measures link and path monitoring after this other intervention: Adjust failure thresholds and probe targets to match the documented tolerance. Its result is: Transient missed probes no longer cause an unwanted HA transition, but sustained failure does. The requested active/passive ha change is Provide the required HA data synchronization interface/path for the selected platform and mode, which must demonstrate: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The offered evidence does not validate the specified control.

D:

The offered observation would confirm the separate intervention: Resolve the documented HA compatibility and synchronization prerequisites before testing failover. It measures: HA status shows synchronized peers and compatible software/content state without synchronization alarms. The current active/passive ha configuration is Provide the required HA data synchronization interface/path for the selected platform and mode, and must demonstrate: Session sync indicators are healthy and established permitted traffic survives the supported failover test. The two acceptance checks are not interchangeable even though they share a feature area.

Palo Alto Networks Certified Next-Generation Firewall Engineer (NGFW-Engineer) Practice Tests