McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 92

Question 910

Within Routing Fundamentals, a Junos engineer proposes the following response: Use the corresponding IPv6 host prefix 2001:db8::10/128. Which concept or operating procedure is best illustrated?

  1. IPv4 default static route
  2. Interface-down connected route
  3. IPv6 /128 loopback route
  4. Qualified static next hop

Explanation

Correct Answer

C:

An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. This meets the stated need for ipv6 /128 loopback route.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 /128 loopback route need in this question.

B:

The interface-down connected route scenario has a different requirement: Direct routes depend on their configured interfaces being operational and participating in routing. It does not directly meet the ipv6 /128 loopback route need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the ipv6 /128 loopback route need in this question.

Question 911

A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route. The proposed response is: Use the corresponding IPv6 host prefix 2001:db8::10/128. Which explanation most accurately supports this response?

  1. The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix.
  2. An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses.
  3. Direct routes depend on their configured interfaces being operational and participating in routing.
  4. Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes.

Explanation

Correct Answer

B:

An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. This meets the stated need for ipv6 /128 loopback route.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 /128 loopback route need in this question.

C:

The interface-down connected route scenario has a different requirement: Direct routes depend on their configured interfaces being operational and participating in routing. It does not directly meet the ipv6 /128 loopback route need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the ipv6 /128 loopback route need in this question.

Question 912

Within Routing Fundamentals, a technician selects this approach: Use the corresponding IPv6 host prefix 2001:db8::10/128. Which original requirement or fault would most directly justify it?

  1. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.
  2. A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route.
  3. A direct subnet disappears from the routing table after its only supporting interface goes down.
  4. Two static next hops for one destination should have different preferences for primary and backup behavior.

Explanation

Correct Answer

B:

An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. This meets the stated need for ipv6 /128 loopback route.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 /128 loopback route need in this question.

C:

The interface-down connected route scenario has a different requirement: Direct routes depend on their configured interfaces being operational and participating in routing. It does not directly meet the ipv6 /128 loopback route need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the ipv6 /128 loopback route need in this question.

Question 913

A routing table needs to summarize adjacent 10.20.0.0/24 and 10.20.1.0/24 networks without including additional /24 blocks. Which configuration or troubleshooting action most directly meets the need?

  1. Advertise or install the aligned aggregate 10.20.0.0/23 where appropriate.
  2. Configure an appropriate export policy for the BGP neighbor or group.
  3. Run ping with the appropriate routing-instance context where the CLI supports it.
  4. Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop.

Explanation

Correct Answer

A:

Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. This meets the stated need for ipv4 supernet route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 supernet route need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the ipv4 supernet route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv4 supernet route need in this question.

Question 914

Within Routing Fundamentals, a Junos engineer proposes the following response: Advertise or install the aligned aggregate 10.20.0.0/23 where appropriate. Which concept or operating procedure is best illustrated?

  1. IPv4 supernet route
  2. Route export to neighbor
  3. Routing instance ping
  4. IPv4 default static route

Explanation

Correct Answer

A:

Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. This meets the stated need for ipv4 supernet route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 supernet route need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the ipv4 supernet route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv4 supernet route need in this question.

Question 915

A routing table needs to summarize adjacent 10.20.0.0/24 and 10.20.1.0/24 networks without including additional /24 blocks. The proposed response is: Advertise or install the aligned aggregate 10.20.0.0/23 where appropriate. Which explanation most accurately supports this response?

  1. Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both.
  2. A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it.
  3. Testing from the correct routing instance uses that instance's routing context rather than the default table.
  4. The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix.

Explanation

Correct Answer

A:

Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. This meets the stated need for ipv4 supernet route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 supernet route need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the ipv4 supernet route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv4 supernet route need in this question.

Question 916

Within Routing Fundamentals, a technician selects this approach: Advertise or install the aligned aggregate 10.20.0.0/23 where appropriate. Which original requirement or fault would most directly justify it?

  1. A routing table needs to summarize adjacent 10.20.0.0/24 and 10.20.1.0/24 networks without including additional /24 blocks.
  2. A static route is active locally but an external BGP peer does not receive it.
  3. A destination is reachable in routing instance BLUE but not through the default routing table.
  4. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.

Explanation

Correct Answer

A:

Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. This meets the stated need for ipv4 supernet route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 supernet route need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the ipv4 supernet route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv4 supernet route need in this question.

Question 917

A static route is active locally but an external BGP peer does not receive it. Which configuration or troubleshooting action most directly meets the need?

  1. Prefer the eligible route with preference 5 when normal selection rules apply.
  2. Configure an appropriate export policy for the BGP neighbor or group.
  3. Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1.
  4. Use the corresponding IPv6 host prefix 2001:db8::10/128.

Explanation

Correct Answer

B:

A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. This meets the stated need for route export to neighbor.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the route export to neighbor need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the route export to neighbor need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the route export to neighbor need in this question.

Question 918

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure an appropriate export policy for the BGP neighbor or group. Which concept or operating procedure is best illustrated?

  1. Lower route preference
  2. Route export to neighbor
  3. Static route next hop
  4. IPv6 /128 loopback route

Explanation

Correct Answer

B:

A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. This meets the stated need for route export to neighbor.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the route export to neighbor need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the route export to neighbor need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the route export to neighbor need in this question.

Question 919

A static route is active locally but an external BGP peer does not receive it. The proposed response is: Configure an appropriate export policy for the BGP neighbor or group. Which explanation most accurately supports this response?

  1. Junos route preference is a ranking in which a lower numeric preference is generally more preferred.
  2. A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it.
  3. A Junos static route associates the destination prefix with a configured forwarding next hop.
  4. An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses.

Explanation

Correct Answer

B:

A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. This meets the stated need for route export to neighbor.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the route export to neighbor need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the route export to neighbor need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the route export to neighbor need in this question.

Question 920

Within Routing Fundamentals, a technician selects this approach: Configure an appropriate export policy for the BGP neighbor or group. Which original requirement or fault would most directly justify it?

  1. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.
  2. A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1.
  3. A static route is active locally but an external BGP peer does not receive it.
  4. A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route.

Explanation

Correct Answer

C:

A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. This meets the stated need for route export to neighbor.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the route export to neighbor need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the route export to neighbor need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the route export to neighbor need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests