McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 94

Question 930

Within Routing Fundamentals, a Junos engineer proposes the following response: Inspect the protocol label and route preference shown by show route. Which concept or operating procedure is best illustrated?

  1. Route protocol identification
  2. Recursive next-hop resolution
  3. Routing instance ping
  4. IPv6 default static route

Explanation

Correct Answer

A:

The routing table identifies the source protocol and associated preference for a route. This meets the stated need for route protocol identification.

Incorrect Answers

B:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the route protocol identification need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route protocol identification need in this question.

D:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the route protocol identification need in this question.

Question 931

An engineer must distinguish an OSPF-learned route from a static route in a route display. The proposed response is: Inspect the protocol label and route preference shown by show route. Which explanation most accurately supports this response?

  1. Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop.
  2. Testing from the correct routing instance uses that instance's routing context rather than the default table.
  3. The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations.
  4. The routing table identifies the source protocol and associated preference for a route.

Explanation

Correct Answer

D:

The routing table identifies the source protocol and associated preference for a route. This meets the stated need for route protocol identification.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the route protocol identification need in this question.

B:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route protocol identification need in this question.

C:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the route protocol identification need in this question.

Question 932

Within Routing Fundamentals, a technician selects this approach: Inspect the protocol label and route preference shown by show route. Which original requirement or fault would most directly justify it?

  1. An engineer must distinguish an OSPF-learned route from a static route in a route display.
  2. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.
  3. A destination is reachable in routing instance BLUE but not through the default routing table.
  4. An IPv6 edge needs a catch-all upstream route for remote IPv6 destinations.

Explanation

Correct Answer

A:

The routing table identifies the source protocol and associated preference for a route. This meets the stated need for route protocol identification.

Incorrect Answers

B:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the route protocol identification need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route protocol identification need in this question.

D:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the route protocol identification need in this question.

Question 933

The BLUE and RED instances both contain 192.0.2.0/24 but lead to different networks. Which configuration or troubleshooting action most directly meets the need?

  1. Keep the prefixes in separate routing instances with separate RIBs and forwarding context.
  2. Restore reachability or resolution of the configured next-hop address.
  3. Use qualified-next-hop attributes with distinct preferences where supported.
  4. Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes.

Explanation

Correct Answer

A:

Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. This meets the stated need for operational routing-table isolation.

Incorrect Answers

B:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the operational routing-table isolation need in this question.

C:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the operational routing-table isolation need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the operational routing-table isolation need in this question.

Question 934

Within Routing Fundamentals, a Junos engineer proposes the following response: Keep the prefixes in separate routing instances with separate RIBs and forwarding context. Which concept or operating procedure is best illustrated?

  1. Route absent due to next-hop resolution
  2. Operational routing-table isolation
  3. Qualified static next hop
  4. Static versus dynamic maintenance

Explanation

Correct Answer

B:

Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. This meets the stated need for operational routing-table isolation.

Incorrect Answers

A:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the operational routing-table isolation need in this question.

C:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the operational routing-table isolation need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the operational routing-table isolation need in this question.

Question 935

The BLUE and RED instances both contain 192.0.2.0/24 but lead to different networks. The proposed response is: Keep the prefixes in separate routing instances with separate RIBs and forwarding context. Which explanation most accurately supports this response?

  1. A route needs a usable resolved next hop before it can produce normal forwarding behavior.
  2. Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes.
  3. Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain.
  4. Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance.

Explanation

Correct Answer

C:

Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. This meets the stated need for operational routing-table isolation.

Incorrect Answers

A:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the operational routing-table isolation need in this question.

B:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the operational routing-table isolation need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the operational routing-table isolation need in this question.

Question 936

Within Routing Fundamentals, a technician selects this approach: Keep the prefixes in separate routing instances with separate RIBs and forwarding context. Which original requirement or fault would most directly justify it?

  1. A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency.
  2. Two static next hops for one destination should have different preferences for primary and backup behavior.
  3. A remote branch topology changes frequently and manually updating many static routes creates errors.
  4. The BLUE and RED instances both contain 192.0.2.0/24 but lead to different networks.

Explanation

Correct Answer

D:

Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. This meets the stated need for operational routing-table isolation.

Incorrect Answers

A:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the operational routing-table isolation need in this question.

B:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the operational routing-table isolation need in this question.

C:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the operational routing-table isolation need in this question.

Question 937

A router's default next hop is 192.0.2.1 and the engineer must verify that this neighbor responds. Which configuration or troubleshooting action most directly meets the need?

  1. Inspect the inet6.0 routing table with show route table inet6.0.
  2. Expect OSPF to withdraw or recalculate affected routes after detecting the failed adjacency.
  3. Configure a static ::/0 route toward the valid IPv6 next hop.
  4. Ping the next-hop IP on the directly attached link before blaming distant routes.

Explanation

Correct Answer

D:

Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. This meets the stated need for direct default-gateway test.

Incorrect Answers

A:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the direct default-gateway test need in this question.

B:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the direct default-gateway test need in this question.

C:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the direct default-gateway test need in this question.

Question 938

Within Routing Fundamentals, a Junos engineer proposes the following response: Ping the next-hop IP on the directly attached link before blaming distant routes. Which concept or operating procedure is best illustrated?

  1. Default IPv6 routing table
  2. Dynamic routing adjacency loss
  3. Direct default-gateway test
  4. IPv6 default static route

Explanation

Correct Answer

C:

Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. This meets the stated need for direct default-gateway test.

Incorrect Answers

A:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the direct default-gateway test need in this question.

B:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the direct default-gateway test need in this question.

D:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the direct default-gateway test need in this question.

Question 939

A router's default next hop is 192.0.2.1 and the engineer must verify that this neighbor responds. The proposed response is: Ping the next-hop IP on the directly attached link before blaming distant routes. Which explanation most accurately supports this response?

  1. Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table.
  2. Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway.
  3. Dynamic routing protocols update route availability when their topology or neighbor state changes.
  4. The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations.

Explanation

Correct Answer

B:

Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. This meets the stated need for direct default-gateway test.

Incorrect Answers

A:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the direct default-gateway test need in this question.

C:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the direct default-gateway test need in this question.

D:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the direct default-gateway test need in this question.

Question 940

Within Routing Fundamentals, a technician selects this approach: Ping the next-hop IP on the directly attached link before blaming distant routes. Which original requirement or fault would most directly justify it?

  1. An engineer needs to inspect IPv6 routes without mixing them with ordinary IPv4 prefixes.
  2. A router's default next hop is 192.0.2.1 and the engineer must verify that this neighbor responds.
  3. An OSPF neighbor disappears and its previously learned remote prefixes become invalid.
  4. An IPv6 edge needs a catch-all upstream route for remote IPv6 destinations.

Explanation

Correct Answer

B:

Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. This meets the stated need for direct default-gateway test.

Incorrect Answers

A:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the direct default-gateway test need in this question.

C:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the direct default-gateway test need in this question.

D:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the direct default-gateway test need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests