McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 91

Question 900

Within Routing Fundamentals, a technician selects this approach: Ensure the next-hop IPv4 address is reachable on a directly connected link and ARP resolves. Which original requirement or fault would most directly justify it?

  1. A static route points to a next-hop router on an Ethernet LAN and requires local address resolution.
  2. A device shows alternate route candidates, but a packet should follow an installed best-path next hop.
  3. A route belongs to routing instance BLUE rather than the default table.
  4. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.

Explanation

Correct Answer

A:

The router must resolve a valid Ethernet adjacency before delivering the packet to the chosen next hop. This meets the stated need for ipv4 on-link next-hop.

Incorrect Answers

B:

The rib versus fib distinction scenario has a different requirement: The RIB can contain alternatives while the forwarding table holds usable forwarding decisions. It does not directly meet the ipv4 on-link next-hop need in this question.

C:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the ipv4 on-link next-hop need in this question.

D:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the ipv4 on-link next-hop need in this question.

Question 901

A router has 0.0.0.0/0 with preference 5 and 203.0.113.0/24 with preference 170; a packet targets 203.0.113.9. Which configuration or troubleshooting action most directly meets the need?

  1. Inspect the inet6.0 routing table with show route table inet6.0.
  2. Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes.
  3. Restore reachability or resolution of the configured next-hop address.
  4. Use the 203.0.113.0/24 route despite its higher preference number.

Explanation

Correct Answer

D:

Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. This meets the stated need for route preference and prefix length.

Incorrect Answers

A:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route preference and prefix length need in this question.

B:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the route preference and prefix length need in this question.

C:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route preference and prefix length need in this question.

Question 902

Within Routing Fundamentals, a Junos engineer proposes the following response: Use the 203.0.113.0/24 route despite its higher preference number. Which concept or operating procedure is best illustrated?

  1. Default IPv6 routing table
  2. Route preference and prefix length
  3. OSPF dynamic route learning
  4. Route absent due to next-hop resolution

Explanation

Correct Answer

B:

Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. This meets the stated need for route preference and prefix length.

Incorrect Answers

A:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route preference and prefix length need in this question.

C:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the route preference and prefix length need in this question.

D:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route preference and prefix length need in this question.

Question 903

A router has 0.0.0.0/0 with preference 5 and 203.0.113.0/24 with preference 170; a packet targets 203.0.113.9. The proposed response is: Use the 203.0.113.0/24 route despite its higher preference number. Which explanation most accurately supports this response?

  1. Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter.
  2. Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table.
  3. OSPF exchanges link-state information and calculates internal best paths as topology changes.
  4. A route needs a usable resolved next hop before it can produce normal forwarding behavior.

Explanation

Correct Answer

A:

Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. This meets the stated need for route preference and prefix length.

Incorrect Answers

B:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route preference and prefix length need in this question.

C:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the route preference and prefix length need in this question.

D:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route preference and prefix length need in this question.

Question 904

Within Routing Fundamentals, a technician selects this approach: Use the 203.0.113.0/24 route despite its higher preference number. Which original requirement or fault would most directly justify it?

  1. An engineer needs to inspect IPv6 routes without mixing them with ordinary IPv4 prefixes.
  2. A routed campus requires automatic learning of internal network changes rather than manually maintaining every prefix.
  3. A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency.
  4. A router has 0.0.0.0/0 with preference 5 and 203.0.113.0/24 with preference 170; a packet targets 203.0.113.9.

Explanation

Correct Answer

D:

Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. This meets the stated need for route preference and prefix length.

Incorrect Answers

A:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route preference and prefix length need in this question.

B:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the route preference and prefix length need in this question.

C:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route preference and prefix length need in this question.

Question 905

An OSPF neighbor disappears and its previously learned remote prefixes become invalid. Which configuration or troubleshooting action most directly meets the need?

  1. Configure or verify supported equal-cost multipath forwarding for the active route.
  2. Advertise or install the aligned aggregate 10.20.0.0/23 where appropriate.
  3. Use qualified-next-hop attributes with distinct preferences where supported.
  4. Expect OSPF to withdraw or recalculate affected routes after detecting the failed adjacency.

Explanation

Correct Answer

D:

Dynamic routing protocols update route availability when their topology or neighbor state changes. This meets the stated need for dynamic routing adjacency loss.

Incorrect Answers

A:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the dynamic routing adjacency loss need in this question.

B:

The ipv4 supernet route scenario has a different requirement: Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. It does not directly meet the dynamic routing adjacency loss need in this question.

C:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the dynamic routing adjacency loss need in this question.

Question 906

Within Routing Fundamentals, a Junos engineer proposes the following response: Expect OSPF to withdraw or recalculate affected routes after detecting the failed adjacency. Which concept or operating procedure is best illustrated?

  1. Equal-cost multipath
  2. IPv4 supernet route
  3. Qualified static next hop
  4. Dynamic routing adjacency loss

Explanation

Correct Answer

D:

Dynamic routing protocols update route availability when their topology or neighbor state changes. This meets the stated need for dynamic routing adjacency loss.

Incorrect Answers

A:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the dynamic routing adjacency loss need in this question.

B:

The ipv4 supernet route scenario has a different requirement: Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. It does not directly meet the dynamic routing adjacency loss need in this question.

C:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the dynamic routing adjacency loss need in this question.

Question 907

An OSPF neighbor disappears and its previously learned remote prefixes become invalid. The proposed response is: Expect OSPF to withdraw or recalculate affected routes after detecting the failed adjacency. Which explanation most accurately supports this response?

  1. ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops.
  2. Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both.
  3. Dynamic routing protocols update route availability when their topology or neighbor state changes.
  4. Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes.

Explanation

Correct Answer

C:

Dynamic routing protocols update route availability when their topology or neighbor state changes. This meets the stated need for dynamic routing adjacency loss.

Incorrect Answers

A:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the dynamic routing adjacency loss need in this question.

B:

The ipv4 supernet route scenario has a different requirement: Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. It does not directly meet the dynamic routing adjacency loss need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the dynamic routing adjacency loss need in this question.

Question 908

Within Routing Fundamentals, a technician selects this approach: Expect OSPF to withdraw or recalculate affected routes after detecting the failed adjacency. Which original requirement or fault would most directly justify it?

  1. Two next hops reach the same destination with equal eligible routing cost and should both be usable.
  2. An OSPF neighbor disappears and its previously learned remote prefixes become invalid.
  3. A routing table needs to summarize adjacent 10.20.0.0/24 and 10.20.1.0/24 networks without including additional /24 blocks.
  4. Two static next hops for one destination should have different preferences for primary and backup behavior.

Explanation

Correct Answer

B:

Dynamic routing protocols update route availability when their topology or neighbor state changes. This meets the stated need for dynamic routing adjacency loss.

Incorrect Answers

A:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the dynamic routing adjacency loss need in this question.

C:

The ipv4 supernet route scenario has a different requirement: Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. It does not directly meet the dynamic routing adjacency loss need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the dynamic routing adjacency loss need in this question.

Question 909

A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route. Which configuration or troubleshooting action most directly meets the need?

  1. Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop.
  2. Use the corresponding IPv6 host prefix 2001:db8::10/128.
  3. Restore the interface's operational state and recheck its connected route.
  4. Use qualified-next-hop attributes with distinct preferences where supported.

Explanation

Correct Answer

B:

An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. This meets the stated need for ipv6 /128 loopback route.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 /128 loopback route need in this question.

C:

The interface-down connected route scenario has a different requirement: Direct routes depend on their configured interfaces being operational and participating in routing. It does not directly meet the ipv6 /128 loopback route need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the ipv6 /128 loopback route need in this question.

Question 910

Within Routing Fundamentals, a Junos engineer proposes the following response: Use the corresponding IPv6 host prefix 2001:db8::10/128. Which concept or operating procedure is best illustrated?

  1. IPv4 default static route
  2. Interface-down connected route
  3. IPv6 /128 loopback route
  4. Qualified static next hop

Explanation

Correct Answer

C:

An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. This meets the stated need for ipv6 /128 loopback route.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 /128 loopback route need in this question.

B:

The interface-down connected route scenario has a different requirement: Direct routes depend on their configured interfaces being operational and participating in routing. It does not directly meet the ipv6 /128 loopback route need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the ipv6 /128 loopback route need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests