McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 93

Question 920

Within Routing Fundamentals, a technician selects this approach: Configure an appropriate export policy for the BGP neighbor or group. Which original requirement or fault would most directly justify it?

  1. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.
  2. A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1.
  3. A static route is active locally but an external BGP peer does not receive it.
  4. A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route.

Explanation

Correct Answer

C:

A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. This meets the stated need for route export to neighbor.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the route export to neighbor need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the route export to neighbor need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the route export to neighbor need in this question.

Question 921

A BGP neighbor sends a prefix, but policy causes it not to enter the desired routing table. Which configuration or troubleshooting action most directly meets the need?

  1. Run ping with the appropriate routing-instance context where the CLI supports it.
  2. Use the 203.0.113.0/24 route despite its higher preference number.
  3. Review the import policy applied to the receiving BGP group.
  4. Use show route extensive for the relevant prefix.

Explanation

Correct Answer

C:

Import routing policy influences which received protocol routes are accepted into the routing table. This meets the stated need for route import acceptance.

Incorrect Answers

A:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route import acceptance need in this question.

B:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the route import acceptance need in this question.

D:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the route import acceptance need in this question.

Question 922

Within Routing Fundamentals, a Junos engineer proposes the following response: Review the import policy applied to the receiving BGP group. Which concept or operating procedure is best illustrated?

  1. Route import acceptance
  2. Routing instance ping
  3. Route preference and prefix length
  4. Show active route detail

Explanation

Correct Answer

A:

Import routing policy influences which received protocol routes are accepted into the routing table. This meets the stated need for route import acceptance.

Incorrect Answers

B:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route import acceptance need in this question.

C:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the route import acceptance need in this question.

D:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the route import acceptance need in this question.

Question 923

A BGP neighbor sends a prefix, but policy causes it not to enter the desired routing table. The proposed response is: Review the import policy applied to the receiving BGP group. Which explanation most accurately supports this response?

  1. Import routing policy influences which received protocol routes are accepted into the routing table.
  2. Testing from the correct routing instance uses that instance's routing context rather than the default table.
  3. Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter.
  4. Detailed route output reports attributes needed to understand the active route decision.

Explanation

Correct Answer

A:

Import routing policy influences which received protocol routes are accepted into the routing table. This meets the stated need for route import acceptance.

Incorrect Answers

B:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route import acceptance need in this question.

C:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the route import acceptance need in this question.

D:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the route import acceptance need in this question.

Question 924

Within Routing Fundamentals, a technician selects this approach: Review the import policy applied to the receiving BGP group. Which original requirement or fault would most directly justify it?

  1. A destination is reachable in routing instance BLUE but not through the default routing table.
  2. A BGP neighbor sends a prefix, but policy causes it not to enter the desired routing table.
  3. A router has 0.0.0.0/0 with preference 5 and 203.0.113.0/24 with preference 170; a packet targets 203.0.113.9.
  4. A path is preferred but an engineer needs to see its protocol and next-hop attributes.

Explanation

Correct Answer

B:

Import routing policy influences which received protocol routes are accepted into the routing table. This meets the stated need for route import acceptance.

Incorrect Answers

A:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route import acceptance need in this question.

C:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the route import acceptance need in this question.

D:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the route import acceptance need in this question.

Question 925

An OSPF route and static route describe the same destination prefix; the static route has normal preference 5 and OSPF 10. Which configuration or troubleshooting action most directly meets the need?

  1. Restore reachability or resolution of the configured next-hop address.
  2. Recognize the Local route for 192.0.2.2/32 in the RIB.
  3. Expect the eligible static route to be active unless another selection condition overrides it.
  4. Expect the router to drop or reject the unmatched packet according to its forwarding behavior.

Explanation

Correct Answer

C:

For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. This meets the stated need for route selection tied to route preference.

Incorrect Answers

A:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route selection tied to route preference need in this question.

B:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route selection tied to route preference need in this question.

D:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the route selection tied to route preference need in this question.

Question 926

Within Routing Fundamentals, a Junos engineer proposes the following response: Expect the eligible static route to be active unless another selection condition overrides it. Which concept or operating procedure is best illustrated?

  1. Route absent due to next-hop resolution
  2. Local interface host route
  3. No matching IPv4 route
  4. Route selection tied to route preference

Explanation

Correct Answer

D:

For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. This meets the stated need for route selection tied to route preference.

Incorrect Answers

A:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route selection tied to route preference need in this question.

B:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route selection tied to route preference need in this question.

C:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the route selection tied to route preference need in this question.

Question 927

An OSPF route and static route describe the same destination prefix; the static route has normal preference 5 and OSPF 10. The proposed response is: Expect the eligible static route to be active unless another selection condition overrides it. Which explanation most accurately supports this response?

  1. A route needs a usable resolved next hop before it can produce normal forwarding behavior.
  2. For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference.
  3. Junos installs a local host route for the IP address owned by a configured logical interface.
  4. IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop.

Explanation

Correct Answer

B:

For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. This meets the stated need for route selection tied to route preference.

Incorrect Answers

A:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route selection tied to route preference need in this question.

C:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route selection tied to route preference need in this question.

D:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the route selection tied to route preference need in this question.

Question 928

Within Routing Fundamentals, a technician selects this approach: Expect the eligible static route to be active unless another selection condition overrides it. Which original requirement or fault would most directly justify it?

  1. A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency.
  2. An interface has IPv4 address 192.0.2.2/30 and the router needs the host route for its own address.
  3. An OSPF route and static route describe the same destination prefix; the static route has normal preference 5 and OSPF 10.
  4. A router has no matching destination route and no active default route.

Explanation

Correct Answer

C:

For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. This meets the stated need for route selection tied to route preference.

Incorrect Answers

A:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the route selection tied to route preference need in this question.

B:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route selection tied to route preference need in this question.

D:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the route selection tied to route preference need in this question.

Question 929

An engineer must distinguish an OSPF-learned route from a static route in a route display. Which configuration or troubleshooting action most directly meets the need?

  1. Verify recursive resolution through an active route to the next-hop address.
  2. Run ping with the appropriate routing-instance context where the CLI supports it.
  3. Inspect the protocol label and route preference shown by show route.
  4. Configure a static ::/0 route toward the valid IPv6 next hop.

Explanation

Correct Answer

C:

The routing table identifies the source protocol and associated preference for a route. This meets the stated need for route protocol identification.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the route protocol identification need in this question.

B:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route protocol identification need in this question.

D:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the route protocol identification need in this question.

Question 930

Within Routing Fundamentals, a Junos engineer proposes the following response: Inspect the protocol label and route preference shown by show route. Which concept or operating procedure is best illustrated?

  1. Route protocol identification
  2. Recursive next-hop resolution
  3. Routing instance ping
  4. IPv6 default static route

Explanation

Correct Answer

A:

The routing table identifies the source protocol and associated preference for a route. This meets the stated need for route protocol identification.

Incorrect Answers

B:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the route protocol identification need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the route protocol identification need in this question.

D:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the route protocol identification need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests