McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 89

Question 880

Within Routing Fundamentals, a technician selects this approach: Run show route forwarding-table for the affected destination. Which original requirement or fault would most directly justify it?

  1. A configured routed interface is up and its on-link subnet appears in the routing table.
  2. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.
  3. A RIB route is active, yet packets are forwarded unexpectedly and the engineer wants to verify actual entries.
  4. Two static next hops for one destination should have different preferences for primary and backup behavior.

Explanation

Correct Answer

C:

The forwarding-table display shows the installed destination and next-hop state used for packet delivery. This meets the stated need for inspect installed next hops.

Incorrect Answers

A:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the inspect installed next hops need in this question.

B:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the inspect installed next hops need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the inspect installed next hops need in this question.

Question 881

A direct subnet disappears from the routing table after its only supporting interface goes down. Which configuration or troubleshooting action most directly meets the need?

  1. Restore the interface's operational state and recheck its connected route.
  2. Configure a static ::/0 route toward the valid IPv6 next hop.
  3. Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes.
  4. Review the import policy applied to the receiving BGP group.

Explanation

Correct Answer

A:

Direct routes depend on their configured interfaces being operational and participating in routing. This meets the stated need for interface-down connected route.

Incorrect Answers

B:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the interface-down connected route need in this question.

C:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the interface-down connected route need in this question.

D:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the interface-down connected route need in this question.

Question 882

Within Routing Fundamentals, a Junos engineer proposes the following response: Restore the interface's operational state and recheck its connected route. Which concept or operating procedure is best illustrated?

  1. IPv6 default static route
  2. OSPF dynamic route learning
  3. Interface-down connected route
  4. Route import acceptance

Explanation

Correct Answer

C:

Direct routes depend on their configured interfaces being operational and participating in routing. This meets the stated need for interface-down connected route.

Incorrect Answers

A:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the interface-down connected route need in this question.

B:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the interface-down connected route need in this question.

D:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the interface-down connected route need in this question.

Question 883

A direct subnet disappears from the routing table after its only supporting interface goes down. The proposed response is: Restore the interface's operational state and recheck its connected route. Which explanation most accurately supports this response?

  1. The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations.
  2. Direct routes depend on their configured interfaces being operational and participating in routing.
  3. OSPF exchanges link-state information and calculates internal best paths as topology changes.
  4. Import routing policy influences which received protocol routes are accepted into the routing table.

Explanation

Correct Answer

B:

Direct routes depend on their configured interfaces being operational and participating in routing. This meets the stated need for interface-down connected route.

Incorrect Answers

A:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the interface-down connected route need in this question.

C:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the interface-down connected route need in this question.

D:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the interface-down connected route need in this question.

Question 884

Within Routing Fundamentals, a technician selects this approach: Restore the interface's operational state and recheck its connected route. Which original requirement or fault would most directly justify it?

  1. An IPv6 edge needs a catch-all upstream route for remote IPv6 destinations.
  2. A routed campus requires automatic learning of internal network changes rather than manually maintaining every prefix.
  3. A direct subnet disappears from the routing table after its only supporting interface goes down.
  4. A BGP neighbor sends a prefix, but policy causes it not to enter the desired routing table.

Explanation

Correct Answer

C:

Direct routes depend on their configured interfaces being operational and participating in routing. This meets the stated need for interface-down connected route.

Incorrect Answers

A:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the interface-down connected route need in this question.

B:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the interface-down connected route need in this question.

D:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the interface-down connected route need in this question.

Question 885

A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop. Which configuration or troubleshooting action most directly meets the need?

  1. Verify recursive resolution through an active route to the next-hop address.
  2. Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes.
  3. Create separate routing-instances using the suitable virtual-router instance type.
  4. Keep the prefixes in separate routing instances with separate RIBs and forwarding context.

Explanation

Correct Answer

A:

Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. This meets the stated need for recursive next-hop resolution.

Incorrect Answers

B:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the recursive next-hop resolution need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the recursive next-hop resolution need in this question.

D:

The operational routing-table isolation scenario has a different requirement: Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. It does not directly meet the recursive next-hop resolution need in this question.

Question 886

Within Routing Fundamentals, a Junos engineer proposes the following response: Verify recursive resolution through an active route to the next-hop address. Which concept or operating procedure is best illustrated?

  1. Named routing-instance RIB
  2. Virtual-router routing instance
  3. Operational routing-table isolation
  4. Recursive next-hop resolution

Explanation

Correct Answer

D:

Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. This meets the stated need for recursive next-hop resolution.

Incorrect Answers

A:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the recursive next-hop resolution need in this question.

B:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the recursive next-hop resolution need in this question.

C:

The operational routing-table isolation scenario has a different requirement: Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. It does not directly meet the recursive next-hop resolution need in this question.

Question 887

A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop. The proposed response is: Verify recursive resolution through an active route to the next-hop address. Which explanation most accurately supports this response?

  1. Named Junos routing instances normally maintain their own tables such as BLUE.inet.0.
  2. Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop.
  3. A virtual-router routing instance maintains its own routing information and logical interface membership.
  4. Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain.

Explanation

Correct Answer

B:

Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. This meets the stated need for recursive next-hop resolution.

Incorrect Answers

A:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the recursive next-hop resolution need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the recursive next-hop resolution need in this question.

D:

The operational routing-table isolation scenario has a different requirement: Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. It does not directly meet the recursive next-hop resolution need in this question.

Question 888

Within Routing Fundamentals, a technician selects this approach: Verify recursive resolution through an active route to the next-hop address. Which original requirement or fault would most directly justify it?

  1. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.
  2. A route belongs to routing instance BLUE rather than the default table.
  3. Two tenant networks need separate routing tables on the same Junos device.
  4. The BLUE and RED instances both contain 192.0.2.0/24 but lead to different networks.

Explanation

Correct Answer

A:

Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. This meets the stated need for recursive next-hop resolution.

Incorrect Answers

B:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the recursive next-hop resolution need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the recursive next-hop resolution need in this question.

D:

The operational routing-table isolation scenario has a different requirement: Independent routing-instance tables allow overlapping destination addresses without sharing a single lookup domain. It does not directly meet the recursive next-hop resolution need in this question.

Question 889

A static route should target exactly one IPv4 address without covering its neighbors. Which configuration or troubleshooting action most directly meets the need?

  1. Advertise or install the aligned aggregate 10.20.0.0/23 where appropriate.
  2. Use show route extensive for the relevant prefix.
  3. Use the corresponding IPv6 host prefix 2001:db8::10/128.
  4. Configure a /32 host route for the single IPv4 destination.

Explanation

Correct Answer

D:

An IPv4 /32 matches precisely one address and is more specific than broader subnets. This meets the stated need for ipv4 host route /32.

Incorrect Answers

A:

The ipv4 supernet route scenario has a different requirement: Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. It does not directly meet the ipv4 host route /32 need in this question.

B:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the ipv4 host route /32 need in this question.

C:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the ipv4 host route /32 need in this question.

Question 890

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure a /32 host route for the single IPv4 destination. Which concept or operating procedure is best illustrated?

  1. IPv4 host route /32
  2. IPv4 supernet route
  3. Show active route detail
  4. IPv6 /128 loopback route

Explanation

Correct Answer

A:

An IPv4 /32 matches precisely one address and is more specific than broader subnets. This meets the stated need for ipv4 host route /32.

Incorrect Answers

B:

The ipv4 supernet route scenario has a different requirement: Two adjacent, correctly aligned /24 networks share a /23 prefix that covers exactly both. It does not directly meet the ipv4 host route /32 need in this question.

C:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the ipv4 host route /32 need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the ipv4 host route /32 need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests