McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 87

Question 860

Within Routing Fundamentals, a technician selects this approach: Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes. Which original requirement or fault would most directly justify it?

  1. A remote branch topology changes frequently and manually updating many static routes creates errors.
  2. A router should refuse traffic to a forbidden prefix with an explicit unreachable response rather than silently dropping it.
  3. Two next hops reach the same destination with equal eligible routing cost and should both be usable.
  4. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.

Explanation

Correct Answer

A:

Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. This meets the stated need for static versus dynamic maintenance.

Incorrect Answers

B:

The static route reject action scenario has a different requirement: A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. It does not directly meet the static versus dynamic maintenance need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the static versus dynamic maintenance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the static versus dynamic maintenance need in this question.

Question 861

A router has no matching destination route and no active default route. Which configuration or troubleshooting action most directly meets the need?

  1. Expect the router to drop or reject the unmatched packet according to its forwarding behavior.
  2. Use BGP peering and relevant import/export policy for the external routing exchange.
  3. Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1.
  4. Configure a /32 host route for the single IPv4 destination.

Explanation

Correct Answer

A:

IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. This meets the stated need for no matching ipv4 route.

Incorrect Answers

B:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the no matching ipv4 route need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the no matching ipv4 route need in this question.

D:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the no matching ipv4 route need in this question.

Question 862

Within Routing Fundamentals, a Junos engineer proposes the following response: Expect the router to drop or reject the unmatched packet according to its forwarding behavior. Which concept or operating procedure is best illustrated?

  1. BGP interdomain route exchange
  2. Static route next hop
  3. IPv4 host route /32
  4. No matching IPv4 route

Explanation

Correct Answer

D:

IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. This meets the stated need for no matching ipv4 route.

Incorrect Answers

A:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the no matching ipv4 route need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the no matching ipv4 route need in this question.

C:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the no matching ipv4 route need in this question.

Question 863

A router has no matching destination route and no active default route. The proposed response is: Expect the router to drop or reject the unmatched packet according to its forwarding behavior. Which explanation most accurately supports this response?

  1. BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems.
  2. A Junos static route associates the destination prefix with a configured forwarding next hop.
  3. An IPv4 /32 matches precisely one address and is more specific than broader subnets.
  4. IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop.

Explanation

Correct Answer

D:

IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. This meets the stated need for no matching ipv4 route.

Incorrect Answers

A:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the no matching ipv4 route need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the no matching ipv4 route need in this question.

C:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the no matching ipv4 route need in this question.

Question 864

Within Routing Fundamentals, a technician selects this approach: Expect the router to drop or reject the unmatched packet according to its forwarding behavior. Which original requirement or fault would most directly justify it?

  1. An organization exchanges many externally learned prefixes with an autonomous-system peer.
  2. A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1.
  3. A router has no matching destination route and no active default route.
  4. A static route should target exactly one IPv4 address without covering its neighbors.

Explanation

Correct Answer

C:

IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. This meets the stated need for no matching ipv4 route.

Incorrect Answers

A:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the no matching ipv4 route need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the no matching ipv4 route need in this question.

D:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the no matching ipv4 route need in this question.

Question 865

Two next hops reach the same destination with equal eligible routing cost and should both be usable. Which configuration or troubleshooting action most directly meets the need?

  1. Expect the router to drop or reject the unmatched packet according to its forwarding behavior.
  2. Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1.
  3. Configure or verify supported equal-cost multipath forwarding for the active route.
  4. Inspect the inet.0 routing table with show route table inet.0.

Explanation

Correct Answer

C:

ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. This meets the stated need for equal-cost multipath.

Incorrect Answers

A:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the equal-cost multipath need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the equal-cost multipath need in this question.

D:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the equal-cost multipath need in this question.

Question 866

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure or verify supported equal-cost multipath forwarding for the active route. Which concept or operating procedure is best illustrated?

  1. Equal-cost multipath
  2. No matching IPv4 route
  3. Static route next hop
  4. Default IPv4 routing table

Explanation

Correct Answer

A:

ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. This meets the stated need for equal-cost multipath.

Incorrect Answers

B:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the equal-cost multipath need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the equal-cost multipath need in this question.

D:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the equal-cost multipath need in this question.

Question 867

Two next hops reach the same destination with equal eligible routing cost and should both be usable. The proposed response is: Configure or verify supported equal-cost multipath forwarding for the active route. Which explanation most accurately supports this response?

  1. ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops.
  2. IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop.
  3. A Junos static route associates the destination prefix with a configured forwarding next hop.
  4. The default Junos IPv4 unicast RIB is normally named inet.0.

Explanation

Correct Answer

A:

ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. This meets the stated need for equal-cost multipath.

Incorrect Answers

B:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the equal-cost multipath need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the equal-cost multipath need in this question.

D:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the equal-cost multipath need in this question.

Question 868

Within Routing Fundamentals, a technician selects this approach: Configure or verify supported equal-cost multipath forwarding for the active route. Which original requirement or fault would most directly justify it?

  1. Two next hops reach the same destination with equal eligible routing cost and should both be usable.
  2. A router has no matching destination route and no active default route.
  3. A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1.
  4. A technician needs to inspect ordinary unicast IPv4 routes in the default routing instance.

Explanation

Correct Answer

A:

ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. This meets the stated need for equal-cost multipath.

Incorrect Answers

B:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the equal-cost multipath need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the equal-cost multipath need in this question.

D:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the equal-cost multipath need in this question.

Question 869

An engineer wants to inspect only route entries learned from the static protocol. Which configuration or troubleshooting action most directly meets the need?

  1. Review the import policy applied to the receiving BGP group.
  2. Run show route protocol static in operational mode.
  3. Run show route forwarding-table for the affected destination.
  4. Use the corresponding IPv6 host prefix 2001:db8::10/128.

Explanation

Correct Answer

B:

Filtering show route by protocol limits the output to the selected route source. This meets the stated need for show static routes only.

Incorrect Answers

A:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the show static routes only need in this question.

C:

The inspect installed next hops scenario has a different requirement: The forwarding-table display shows the installed destination and next-hop state used for packet delivery. It does not directly meet the show static routes only need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show static routes only need in this question.

Question 870

Within Routing Fundamentals, a Junos engineer proposes the following response: Run show route protocol static in operational mode. Which concept or operating procedure is best illustrated?

  1. Show static routes only
  2. Route import acceptance
  3. Inspect installed next hops
  4. IPv6 /128 loopback route

Explanation

Correct Answer

A:

Filtering show route by protocol limits the output to the selected route source. This meets the stated need for show static routes only.

Incorrect Answers

B:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the show static routes only need in this question.

C:

The inspect installed next hops scenario has a different requirement: The forwarding-table display shows the installed destination and next-hop state used for packet delivery. It does not directly meet the show static routes only need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show static routes only need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests