McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 88

Question 870

Within Routing Fundamentals, a Junos engineer proposes the following response: Run show route protocol static in operational mode. Which concept or operating procedure is best illustrated?

  1. Show static routes only
  2. Route import acceptance
  3. Inspect installed next hops
  4. IPv6 /128 loopback route

Explanation

Correct Answer

A:

Filtering show route by protocol limits the output to the selected route source. This meets the stated need for show static routes only.

Incorrect Answers

B:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the show static routes only need in this question.

C:

The inspect installed next hops scenario has a different requirement: The forwarding-table display shows the installed destination and next-hop state used for packet delivery. It does not directly meet the show static routes only need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show static routes only need in this question.

Question 871

An engineer wants to inspect only route entries learned from the static protocol. The proposed response is: Run show route protocol static in operational mode. Which explanation most accurately supports this response?

  1. Import routing policy influences which received protocol routes are accepted into the routing table.
  2. The forwarding-table display shows the installed destination and next-hop state used for packet delivery.
  3. Filtering show route by protocol limits the output to the selected route source.
  4. An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses.

Explanation

Correct Answer

C:

Filtering show route by protocol limits the output to the selected route source. This meets the stated need for show static routes only.

Incorrect Answers

A:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the show static routes only need in this question.

B:

The inspect installed next hops scenario has a different requirement: The forwarding-table display shows the installed destination and next-hop state used for packet delivery. It does not directly meet the show static routes only need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show static routes only need in this question.

Question 872

Within Routing Fundamentals, a technician selects this approach: Run show route protocol static in operational mode. Which original requirement or fault would most directly justify it?

  1. A BGP neighbor sends a prefix, but policy causes it not to enter the desired routing table.
  2. A RIB route is active, yet packets are forwarded unexpectedly and the engineer wants to verify actual entries.
  3. An engineer wants to inspect only route entries learned from the static protocol.
  4. A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route.

Explanation

Correct Answer

C:

Filtering show route by protocol limits the output to the selected route source. This meets the stated need for show static routes only.

Incorrect Answers

A:

The route import acceptance scenario has a different requirement: Import routing policy influences which received protocol routes are accepted into the routing table. It does not directly meet the show static routes only need in this question.

B:

The inspect installed next hops scenario has a different requirement: The forwarding-table display shows the installed destination and next-hop state used for packet delivery. It does not directly meet the show static routes only need in this question.

D:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show static routes only need in this question.

Question 873

A path is preferred but an engineer needs to see its protocol and next-hop attributes. Which configuration or troubleshooting action most directly meets the need?

  1. Use show route extensive for the relevant prefix.
  2. Use the corresponding IPv6 host prefix 2001:db8::10/128.
  3. Configure an appropriate static discard route for that aggregate.
  4. Prefer the eligible route with preference 5 when normal selection rules apply.

Explanation

Correct Answer

A:

Detailed route output reports attributes needed to understand the active route decision. This meets the stated need for show active route detail.

Incorrect Answers

B:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show active route detail need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the show active route detail need in this question.

D:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the show active route detail need in this question.

Question 874

Within Routing Fundamentals, a Junos engineer proposes the following response: Use show route extensive for the relevant prefix. Which concept or operating procedure is best illustrated?

  1. Show active route detail
  2. IPv6 /128 loopback route
  3. Static route discard action
  4. Lower route preference

Explanation

Correct Answer

A:

Detailed route output reports attributes needed to understand the active route decision. This meets the stated need for show active route detail.

Incorrect Answers

B:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show active route detail need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the show active route detail need in this question.

D:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the show active route detail need in this question.

Question 875

A path is preferred but an engineer needs to see its protocol and next-hop attributes. The proposed response is: Use show route extensive for the relevant prefix. Which explanation most accurately supports this response?

  1. An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses.
  2. A static discard next hop silently drops matching traffic and can provide an aggregation safety route.
  3. Junos route preference is a ranking in which a lower numeric preference is generally more preferred.
  4. Detailed route output reports attributes needed to understand the active route decision.

Explanation

Correct Answer

D:

Detailed route output reports attributes needed to understand the active route decision. This meets the stated need for show active route detail.

Incorrect Answers

A:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show active route detail need in this question.

B:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the show active route detail need in this question.

C:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the show active route detail need in this question.

Question 876

Within Routing Fundamentals, a technician selects this approach: Use show route extensive for the relevant prefix. Which original requirement or fault would most directly justify it?

  1. A path is preferred but an engineer needs to see its protocol and next-hop attributes.
  2. A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route.
  3. A network should intentionally drop traffic to a configured aggregate when no more specific path exists.
  4. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.

Explanation

Correct Answer

A:

Detailed route output reports attributes needed to understand the active route decision. This meets the stated need for show active route detail.

Incorrect Answers

B:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the show active route detail need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the show active route detail need in this question.

D:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the show active route detail need in this question.

Question 877

A RIB route is active, yet packets are forwarded unexpectedly and the engineer wants to verify actual entries. Which configuration or troubleshooting action most directly meets the need?

  1. Recognize the connected prefix as a Direct protocol route.
  2. Prefer the eligible route with preference 5 when normal selection rules apply.
  3. Run show route forwarding-table for the affected destination.
  4. Use qualified-next-hop attributes with distinct preferences where supported.

Explanation

Correct Answer

C:

The forwarding-table display shows the installed destination and next-hop state used for packet delivery. This meets the stated need for inspect installed next hops.

Incorrect Answers

A:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the inspect installed next hops need in this question.

B:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the inspect installed next hops need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the inspect installed next hops need in this question.

Question 878

Within Routing Fundamentals, a Junos engineer proposes the following response: Run show route forwarding-table for the affected destination. Which concept or operating procedure is best illustrated?

  1. Direct route from interface
  2. Inspect installed next hops
  3. Lower route preference
  4. Qualified static next hop

Explanation

Correct Answer

B:

The forwarding-table display shows the installed destination and next-hop state used for packet delivery. This meets the stated need for inspect installed next hops.

Incorrect Answers

A:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the inspect installed next hops need in this question.

C:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the inspect installed next hops need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the inspect installed next hops need in this question.

Question 879

A RIB route is active, yet packets are forwarded unexpectedly and the engineer wants to verify actual entries. The proposed response is: Run show route forwarding-table for the affected destination. Which explanation most accurately supports this response?

  1. A directly connected network normally produces a Direct route while its participating interface is operational.
  2. Junos route preference is a ranking in which a lower numeric preference is generally more preferred.
  3. Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes.
  4. The forwarding-table display shows the installed destination and next-hop state used for packet delivery.

Explanation

Correct Answer

D:

The forwarding-table display shows the installed destination and next-hop state used for packet delivery. This meets the stated need for inspect installed next hops.

Incorrect Answers

A:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the inspect installed next hops need in this question.

B:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the inspect installed next hops need in this question.

C:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the inspect installed next hops need in this question.

Question 880

Within Routing Fundamentals, a technician selects this approach: Run show route forwarding-table for the affected destination. Which original requirement or fault would most directly justify it?

  1. A configured routed interface is up and its on-link subnet appears in the routing table.
  2. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.
  3. A RIB route is active, yet packets are forwarded unexpectedly and the engineer wants to verify actual entries.
  4. Two static next hops for one destination should have different preferences for primary and backup behavior.

Explanation

Correct Answer

C:

The forwarding-table display shows the installed destination and next-hop state used for packet delivery. This meets the stated need for inspect installed next hops.

Incorrect Answers

A:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the inspect installed next hops need in this question.

B:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the inspect installed next hops need in this question.

D:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the inspect installed next hops need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests