McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 86

Question 850

Within Routing Fundamentals, a Junos engineer proposes the following response: Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes. Which concept or operating procedure is best illustrated?

  1. Virtual-router routing instance
  2. Static versus dynamic maintenance
  3. Equal-cost multipath
  4. OSPF dynamic route learning

Explanation

Correct Answer

D:

OSPF exchanges link-state information and calculates internal best paths as topology changes. This meets the stated need for ospf dynamic route learning.

Incorrect Answers

A:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the ospf dynamic route learning need in this question.

B:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the ospf dynamic route learning need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the ospf dynamic route learning need in this question.

Question 851

A routed campus requires automatic learning of internal network changes rather than manually maintaining every prefix. The proposed response is: Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes. Which explanation most accurately supports this response?

  1. OSPF exchanges link-state information and calculates internal best paths as topology changes.
  2. A virtual-router routing instance maintains its own routing information and logical interface membership.
  3. Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance.
  4. ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops.

Explanation

Correct Answer

A:

OSPF exchanges link-state information and calculates internal best paths as topology changes. This meets the stated need for ospf dynamic route learning.

Incorrect Answers

B:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the ospf dynamic route learning need in this question.

C:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the ospf dynamic route learning need in this question.

D:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the ospf dynamic route learning need in this question.

Question 852

Within Routing Fundamentals, a technician selects this approach: Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes. Which original requirement or fault would most directly justify it?

  1. A routed campus requires automatic learning of internal network changes rather than manually maintaining every prefix.
  2. Two tenant networks need separate routing tables on the same Junos device.
  3. A remote branch topology changes frequently and manually updating many static routes creates errors.
  4. Two next hops reach the same destination with equal eligible routing cost and should both be usable.

Explanation

Correct Answer

A:

OSPF exchanges link-state information and calculates internal best paths as topology changes. This meets the stated need for ospf dynamic route learning.

Incorrect Answers

B:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the ospf dynamic route learning need in this question.

C:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the ospf dynamic route learning need in this question.

D:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the ospf dynamic route learning need in this question.

Question 853

An organization exchanges many externally learned prefixes with an autonomous-system peer. Which configuration or troubleshooting action most directly meets the need?

  1. Verify recursive resolution through an active route to the next-hop address.
  2. Use BGP peering and relevant import/export policy for the external routing exchange.
  3. Ensure the next-hop IPv4 address is reachable on a directly connected link and ARP resolves.
  4. Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes.

Explanation

Correct Answer

B:

BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. This meets the stated need for bgp interdomain route exchange.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the bgp interdomain route exchange need in this question.

C:

The ipv4 on-link next-hop scenario has a different requirement: The router must resolve a valid Ethernet adjacency before delivering the packet to the chosen next hop. It does not directly meet the bgp interdomain route exchange need in this question.

D:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the bgp interdomain route exchange need in this question.

Question 854

Within Routing Fundamentals, a Junos engineer proposes the following response: Use BGP peering and relevant import/export policy for the external routing exchange. Which concept or operating procedure is best illustrated?

  1. Recursive next-hop resolution
  2. BGP interdomain route exchange
  3. IPv4 on-link next-hop
  4. Named routing-instance RIB

Explanation

Correct Answer

B:

BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. This meets the stated need for bgp interdomain route exchange.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the bgp interdomain route exchange need in this question.

C:

The ipv4 on-link next-hop scenario has a different requirement: The router must resolve a valid Ethernet adjacency before delivering the packet to the chosen next hop. It does not directly meet the bgp interdomain route exchange need in this question.

D:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the bgp interdomain route exchange need in this question.

Question 855

An organization exchanges many externally learned prefixes with an autonomous-system peer. The proposed response is: Use BGP peering and relevant import/export policy for the external routing exchange. Which explanation most accurately supports this response?

  1. BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems.
  2. Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop.
  3. The router must resolve a valid Ethernet adjacency before delivering the packet to the chosen next hop.
  4. Named Junos routing instances normally maintain their own tables such as BLUE.inet.0.

Explanation

Correct Answer

A:

BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. This meets the stated need for bgp interdomain route exchange.

Incorrect Answers

B:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the bgp interdomain route exchange need in this question.

C:

The ipv4 on-link next-hop scenario has a different requirement: The router must resolve a valid Ethernet adjacency before delivering the packet to the chosen next hop. It does not directly meet the bgp interdomain route exchange need in this question.

D:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the bgp interdomain route exchange need in this question.

Question 856

Within Routing Fundamentals, a technician selects this approach: Use BGP peering and relevant import/export policy for the external routing exchange. Which original requirement or fault would most directly justify it?

  1. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.
  2. An organization exchanges many externally learned prefixes with an autonomous-system peer.
  3. A static route points to a next-hop router on an Ethernet LAN and requires local address resolution.
  4. A route belongs to routing instance BLUE rather than the default table.

Explanation

Correct Answer

B:

BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. This meets the stated need for bgp interdomain route exchange.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the bgp interdomain route exchange need in this question.

C:

The ipv4 on-link next-hop scenario has a different requirement: The router must resolve a valid Ethernet adjacency before delivering the packet to the chosen next hop. It does not directly meet the bgp interdomain route exchange need in this question.

D:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the bgp interdomain route exchange need in this question.

Question 857

A remote branch topology changes frequently and manually updating many static routes creates errors. Which configuration or troubleshooting action most directly meets the need?

  1. Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes.
  2. Configure a supported static reject route for the destination.
  3. Configure or verify supported equal-cost multipath forwarding for the active route.
  4. Verify recursive resolution through an active route to the next-hop address.

Explanation

Correct Answer

A:

Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. This meets the stated need for static versus dynamic maintenance.

Incorrect Answers

B:

The static route reject action scenario has a different requirement: A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. It does not directly meet the static versus dynamic maintenance need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the static versus dynamic maintenance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the static versus dynamic maintenance need in this question.

Question 858

Within Routing Fundamentals, a Junos engineer proposes the following response: Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes. Which concept or operating procedure is best illustrated?

  1. Static route reject action
  2. Static versus dynamic maintenance
  3. Equal-cost multipath
  4. Recursive next-hop resolution

Explanation

Correct Answer

B:

Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. This meets the stated need for static versus dynamic maintenance.

Incorrect Answers

A:

The static route reject action scenario has a different requirement: A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. It does not directly meet the static versus dynamic maintenance need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the static versus dynamic maintenance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the static versus dynamic maintenance need in this question.

Question 859

A remote branch topology changes frequently and manually updating many static routes creates errors. The proposed response is: Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes. Which explanation most accurately supports this response?

  1. A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard.
  2. ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops.
  3. Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance.
  4. Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop.

Explanation

Correct Answer

C:

Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. This meets the stated need for static versus dynamic maintenance.

Incorrect Answers

A:

The static route reject action scenario has a different requirement: A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. It does not directly meet the static versus dynamic maintenance need in this question.

B:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the static versus dynamic maintenance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the static versus dynamic maintenance need in this question.

Question 860

Within Routing Fundamentals, a technician selects this approach: Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes. Which original requirement or fault would most directly justify it?

  1. A remote branch topology changes frequently and manually updating many static routes creates errors.
  2. A router should refuse traffic to a forbidden prefix with an explicit unreachable response rather than silently dropping it.
  3. Two next hops reach the same destination with equal eligible routing cost and should both be usable.
  4. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.

Explanation

Correct Answer

A:

Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. This meets the stated need for static versus dynamic maintenance.

Incorrect Answers

B:

The static route reject action scenario has a different requirement: A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. It does not directly meet the static versus dynamic maintenance need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the static versus dynamic maintenance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the static versus dynamic maintenance need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests