McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 85

Question 840

Within Routing Fundamentals, a technician selects this approach: Forward using the 192.0.2.128/25 route. Which original requirement or fault would most directly justify it?

  1. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.
  2. The router has active routes 192.0.2.0/24 and 192.0.2.128/25, then receives traffic for 192.0.2.200.
  3. Two tenant networks need separate routing tables on the same Junos device.
  4. A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency.

Explanation

Correct Answer

B:

A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. This meets the stated need for longest match /25 over /24.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the longest match /25 over /24 need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the longest match /25 over /24 need in this question.

D:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the longest match /25 over /24 need in this question.

Question 841

A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency. Which configuration or troubleshooting action most directly meets the need?

  1. Ping the next-hop IP on the directly attached link before blaming distant routes.
  2. Recognize the Local route for 192.0.2.2/32 in the RIB.
  3. Inspect the inet6.0 routing table with show route table inet6.0.
  4. Restore reachability or resolution of the configured next-hop address.

Explanation

Correct Answer

D:

A route needs a usable resolved next hop before it can produce normal forwarding behavior. This meets the stated need for route absent due to next-hop resolution.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the route absent due to next-hop resolution need in this question.

B:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route absent due to next-hop resolution need in this question.

C:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route absent due to next-hop resolution need in this question.

Question 842

Within Routing Fundamentals, a Junos engineer proposes the following response: Restore reachability or resolution of the configured next-hop address. Which concept or operating procedure is best illustrated?

  1. Direct default-gateway test
  2. Local interface host route
  3. Default IPv6 routing table
  4. Route absent due to next-hop resolution

Explanation

Correct Answer

D:

A route needs a usable resolved next hop before it can produce normal forwarding behavior. This meets the stated need for route absent due to next-hop resolution.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the route absent due to next-hop resolution need in this question.

B:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route absent due to next-hop resolution need in this question.

C:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route absent due to next-hop resolution need in this question.

Question 843

A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency. The proposed response is: Restore reachability or resolution of the configured next-hop address. Which explanation most accurately supports this response?

  1. Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway.
  2. Junos installs a local host route for the IP address owned by a configured logical interface.
  3. Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table.
  4. A route needs a usable resolved next hop before it can produce normal forwarding behavior.

Explanation

Correct Answer

D:

A route needs a usable resolved next hop before it can produce normal forwarding behavior. This meets the stated need for route absent due to next-hop resolution.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the route absent due to next-hop resolution need in this question.

B:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route absent due to next-hop resolution need in this question.

C:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route absent due to next-hop resolution need in this question.

Question 844

Within Routing Fundamentals, a technician selects this approach: Restore reachability or resolution of the configured next-hop address. Which original requirement or fault would most directly justify it?

  1. A router's default next hop is 192.0.2.1 and the engineer must verify that this neighbor responds.
  2. An interface has IPv4 address 192.0.2.2/30 and the router needs the host route for its own address.
  3. A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency.
  4. An engineer needs to inspect IPv6 routes without mixing them with ordinary IPv4 prefixes.

Explanation

Correct Answer

C:

A route needs a usable resolved next hop before it can produce normal forwarding behavior. This meets the stated need for route absent due to next-hop resolution.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the route absent due to next-hop resolution need in this question.

B:

The local interface host route scenario has a different requirement: Junos installs a local host route for the IP address owned by a configured logical interface. It does not directly meet the route absent due to next-hop resolution need in this question.

D:

The default ipv6 routing table scenario has a different requirement: Junos normally stores IPv6 unicast routes in inet6.0 rather than the IPv4 inet.0 table. It does not directly meet the route absent due to next-hop resolution need in this question.

Question 845

Two static next hops for one destination should have different preferences for primary and backup behavior. Which configuration or troubleshooting action most directly meets the need?

  1. Create separate routing-instances using the suitable virtual-router instance type.
  2. Use qualified-next-hop attributes with distinct preferences where supported.
  3. Recognize the connected prefix as a Direct protocol route.
  4. Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes.

Explanation

Correct Answer

B:

Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. This meets the stated need for qualified static next hop.

Incorrect Answers

A:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the qualified static next hop need in this question.

C:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the qualified static next hop need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the qualified static next hop need in this question.

Question 846

Within Routing Fundamentals, a Junos engineer proposes the following response: Use qualified-next-hop attributes with distinct preferences where supported. Which concept or operating procedure is best illustrated?

  1. Virtual-router routing instance
  2. Qualified static next hop
  3. Direct route from interface
  4. Static versus dynamic maintenance

Explanation

Correct Answer

B:

Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. This meets the stated need for qualified static next hop.

Incorrect Answers

A:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the qualified static next hop need in this question.

C:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the qualified static next hop need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the qualified static next hop need in this question.

Question 847

Two static next hops for one destination should have different preferences for primary and backup behavior. The proposed response is: Use qualified-next-hop attributes with distinct preferences where supported. Which explanation most accurately supports this response?

  1. A virtual-router routing instance maintains its own routing information and logical interface membership.
  2. A directly connected network normally produces a Direct route while its participating interface is operational.
  3. Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance.
  4. Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes.

Explanation

Correct Answer

D:

Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. This meets the stated need for qualified static next hop.

Incorrect Answers

A:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the qualified static next hop need in this question.

B:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the qualified static next hop need in this question.

C:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the qualified static next hop need in this question.

Question 848

Within Routing Fundamentals, a technician selects this approach: Use qualified-next-hop attributes with distinct preferences where supported. Which original requirement or fault would most directly justify it?

  1. Two tenant networks need separate routing tables on the same Junos device.
  2. Two static next hops for one destination should have different preferences for primary and backup behavior.
  3. A configured routed interface is up and its on-link subnet appears in the routing table.
  4. A remote branch topology changes frequently and manually updating many static routes creates errors.

Explanation

Correct Answer

B:

Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. This meets the stated need for qualified static next hop.

Incorrect Answers

A:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the qualified static next hop need in this question.

C:

The direct route from interface scenario has a different requirement: A directly connected network normally produces a Direct route while its participating interface is operational. It does not directly meet the qualified static next hop need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the qualified static next hop need in this question.

Question 849

A routed campus requires automatic learning of internal network changes rather than manually maintaining every prefix. Which configuration or troubleshooting action most directly meets the need?

  1. Create separate routing-instances using the suitable virtual-router instance type.
  2. Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes.
  3. Configure or verify supported equal-cost multipath forwarding for the active route.
  4. Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes.

Explanation

Correct Answer

D:

OSPF exchanges link-state information and calculates internal best paths as topology changes. This meets the stated need for ospf dynamic route learning.

Incorrect Answers

A:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the ospf dynamic route learning need in this question.

B:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the ospf dynamic route learning need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the ospf dynamic route learning need in this question.

Question 850

Within Routing Fundamentals, a Junos engineer proposes the following response: Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes. Which concept or operating procedure is best illustrated?

  1. Virtual-router routing instance
  2. Static versus dynamic maintenance
  3. Equal-cost multipath
  4. OSPF dynamic route learning

Explanation

Correct Answer

D:

OSPF exchanges link-state information and calculates internal best paths as topology changes. This meets the stated need for ospf dynamic route learning.

Incorrect Answers

A:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the ospf dynamic route learning need in this question.

B:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the ospf dynamic route learning need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the ospf dynamic route learning need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests