McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 84

Question 830

Within Routing Fundamentals, a Junos engineer proposes the following response: Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes. Which concept or operating procedure is best illustrated?

  1. Recursive next-hop resolution
  2. Named routing-instance RIB
  3. Show active route detail
  4. Static route discard action

Explanation

Correct Answer

B:

Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. This meets the stated need for named routing-instance rib.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the named routing-instance rib need in this question.

C:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the named routing-instance rib need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the named routing-instance rib need in this question.

Question 831

A route belongs to routing instance BLUE rather than the default table. The proposed response is: Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes. Which explanation most accurately supports this response?

  1. Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop.
  2. Detailed route output reports attributes needed to understand the active route decision.
  3. Named Junos routing instances normally maintain their own tables such as BLUE.inet.0.
  4. A static discard next hop silently drops matching traffic and can provide an aggregation safety route.

Explanation

Correct Answer

C:

Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. This meets the stated need for named routing-instance rib.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the named routing-instance rib need in this question.

B:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the named routing-instance rib need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the named routing-instance rib need in this question.

Question 832

Within Routing Fundamentals, a technician selects this approach: Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes. Which original requirement or fault would most directly justify it?

  1. A route belongs to routing instance BLUE rather than the default table.
  2. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.
  3. A path is preferred but an engineer needs to see its protocol and next-hop attributes.
  4. A network should intentionally drop traffic to a configured aggregate when no more specific path exists.

Explanation

Correct Answer

A:

Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. This meets the stated need for named routing-instance rib.

Incorrect Answers

B:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the named routing-instance rib need in this question.

C:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the named routing-instance rib need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the named routing-instance rib need in this question.

Question 833

A device shows alternate route candidates, but a packet should follow an installed best-path next hop. Which configuration or troubleshooting action most directly meets the need?

  1. Use the forwarding table to determine actual packet forwarding rather than assuming every RIB candidate forwards.
  2. Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes.
  3. Use the corresponding IPv6 host prefix 2001:db8::10/128.
  4. Verify recursive resolution through an active route to the next-hop address.

Explanation

Correct Answer

A:

The RIB can contain alternatives while the forwarding table holds usable forwarding decisions. This meets the stated need for rib versus fib distinction.

Incorrect Answers

B:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the rib versus fib distinction need in this question.

C:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the rib versus fib distinction need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the rib versus fib distinction need in this question.

Question 834

Within Routing Fundamentals, a Junos engineer proposes the following response: Use the forwarding table to determine actual packet forwarding rather than assuming every RIB candidate forwards. Which concept or operating procedure is best illustrated?

  1. Static versus dynamic maintenance
  2. RIB versus FIB distinction
  3. IPv6 /128 loopback route
  4. Recursive next-hop resolution

Explanation

Correct Answer

B:

The RIB can contain alternatives while the forwarding table holds usable forwarding decisions. This meets the stated need for rib versus fib distinction.

Incorrect Answers

A:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the rib versus fib distinction need in this question.

C:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the rib versus fib distinction need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the rib versus fib distinction need in this question.

Question 835

A device shows alternate route candidates, but a packet should follow an installed best-path next hop. The proposed response is: Use the forwarding table to determine actual packet forwarding rather than assuming every RIB candidate forwards. Which explanation most accurately supports this response?

  1. Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance.
  2. An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses.
  3. The RIB can contain alternatives while the forwarding table holds usable forwarding decisions.
  4. Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop.

Explanation

Correct Answer

C:

The RIB can contain alternatives while the forwarding table holds usable forwarding decisions. This meets the stated need for rib versus fib distinction.

Incorrect Answers

A:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the rib versus fib distinction need in this question.

B:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the rib versus fib distinction need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the rib versus fib distinction need in this question.

Question 836

Within Routing Fundamentals, a technician selects this approach: Use the forwarding table to determine actual packet forwarding rather than assuming every RIB candidate forwards. Which original requirement or fault would most directly justify it?

  1. A remote branch topology changes frequently and manually updating many static routes creates errors.
  2. A device shows alternate route candidates, but a packet should follow an installed best-path next hop.
  3. A Junos loopback has address 2001:db8::10/128 and an administrator needs to identify its single-address route.
  4. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.

Explanation

Correct Answer

B:

The RIB can contain alternatives while the forwarding table holds usable forwarding decisions. This meets the stated need for rib versus fib distinction.

Incorrect Answers

A:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the rib versus fib distinction need in this question.

C:

The ipv6 /128 loopback route scenario has a different requirement: An IPv6 /128 prefix uniquely identifies one IPv6 address without encompassing adjacent addresses. It does not directly meet the rib versus fib distinction need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the rib versus fib distinction need in this question.

Question 837

The router has active routes 192.0.2.0/24 and 192.0.2.128/25, then receives traffic for 192.0.2.200. Which configuration or troubleshooting action most directly meets the need?

  1. Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop.
  2. Create separate routing-instances using the suitable virtual-router instance type.
  3. Restore reachability or resolution of the configured next-hop address.
  4. Forward using the 192.0.2.128/25 route.

Explanation

Correct Answer

D:

A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. This meets the stated need for longest match /25 over /24.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the longest match /25 over /24 need in this question.

B:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the longest match /25 over /24 need in this question.

C:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the longest match /25 over /24 need in this question.

Question 838

Within Routing Fundamentals, a Junos engineer proposes the following response: Forward using the 192.0.2.128/25 route. Which concept or operating procedure is best illustrated?

  1. Longest match /25 over /24
  2. IPv4 default static route
  3. Virtual-router routing instance
  4. Route absent due to next-hop resolution

Explanation

Correct Answer

A:

A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. This meets the stated need for longest match /25 over /24.

Incorrect Answers

B:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the longest match /25 over /24 need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the longest match /25 over /24 need in this question.

D:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the longest match /25 over /24 need in this question.

Question 839

The router has active routes 192.0.2.0/24 and 192.0.2.128/25, then receives traffic for 192.0.2.200. The proposed response is: Forward using the 192.0.2.128/25 route. Which explanation most accurately supports this response?

  1. A longer /25 prefix takes precedence over an overlapping /24 for matching destinations.
  2. The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix.
  3. A virtual-router routing instance maintains its own routing information and logical interface membership.
  4. A route needs a usable resolved next hop before it can produce normal forwarding behavior.

Explanation

Correct Answer

A:

A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. This meets the stated need for longest match /25 over /24.

Incorrect Answers

B:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the longest match /25 over /24 need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the longest match /25 over /24 need in this question.

D:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the longest match /25 over /24 need in this question.

Question 840

Within Routing Fundamentals, a technician selects this approach: Forward using the 192.0.2.128/25 route. Which original requirement or fault would most directly justify it?

  1. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.
  2. The router has active routes 192.0.2.0/24 and 192.0.2.128/25, then receives traffic for 192.0.2.200.
  3. Two tenant networks need separate routing tables on the same Junos device.
  4. A configured static route is not active because its next hop cannot be resolved to a valid forwarding adjacency.

Explanation

Correct Answer

B:

A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. This meets the stated need for longest match /25 over /24.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the longest match /25 over /24 need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the longest match /25 over /24 need in this question.

D:

The route absent due to next-hop resolution scenario has a different requirement: A route needs a usable resolved next hop before it can produce normal forwarding behavior. It does not directly meet the longest match /25 over /24 need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests