McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 83

Question 820

Within Routing Fundamentals, a technician selects this approach: Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop. Which original requirement or fault would most directly justify it?

  1. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.
  2. A static route is active locally but an external BGP peer does not receive it.
  3. A network should intentionally drop traffic to a configured aggregate when no more specific path exists.
  4. A router has 0.0.0.0/0 with preference 5 and 203.0.113.0/24 with preference 170; a packet targets 203.0.113.9.

Explanation

Correct Answer

A:

The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. This meets the stated need for ipv4 default static route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 default static route need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the ipv4 default static route need in this question.

D:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the ipv4 default static route need in this question.

Question 821

An IPv6 edge needs a catch-all upstream route for remote IPv6 destinations. Which configuration or troubleshooting action most directly meets the need?

  1. Use BGP peering and relevant import/export policy for the external routing exchange.
  2. Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1.
  3. Configure a static ::/0 route toward the valid IPv6 next hop.
  4. Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop.

Explanation

Correct Answer

C:

The::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. This meets the stated need for ipv6 default static route.

Incorrect Answers

A:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the ipv6 default static route need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the ipv6 default static route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 default static route need in this question.

Question 822

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure a static ::/0 route toward the valid IPv6 next hop. Which concept or operating procedure is best illustrated?

  1. IPv6 default static route
  2. BGP interdomain route exchange
  3. Static route next hop
  4. IPv4 default static route

Explanation

Correct Answer

A:

The::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. This meets the stated need for ipv6 default static route.

Incorrect Answers

B:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the ipv6 default static route need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the ipv6 default static route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 default static route need in this question.

Question 823

An IPv6 edge needs a catch-all upstream route for remote IPv6 destinations. The proposed response is: Configure a static ::/0 route toward the valid IPv6 next hop. Which explanation most accurately supports this response?

  1. BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems.
  2. A Junos static route associates the destination prefix with a configured forwarding next hop.
  3. The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations.
  4. The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix.

Explanation

Correct Answer

C:

The::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. This meets the stated need for ipv6 default static route.

Incorrect Answers

A:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the ipv6 default static route need in this question.

B:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the ipv6 default static route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 default static route need in this question.

Question 824

Within Routing Fundamentals, a technician selects this approach: Configure a static ::/0 route toward the valid IPv6 next hop. Which original requirement or fault would most directly justify it?

  1. An IPv6 edge needs a catch-all upstream route for remote IPv6 destinations.
  2. An organization exchanges many externally learned prefixes with an autonomous-system peer.
  3. A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1.
  4. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.

Explanation

Correct Answer

A:

The::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. This meets the stated need for ipv6 default static route.

Incorrect Answers

B:

The bgp interdomain route exchange scenario has a different requirement: BGP is a path-vector routing protocol widely used to exchange routes between autonomous systems. It does not directly meet the ipv6 default static route need in this question.

C:

The static route next hop scenario has a different requirement: A Junos static route associates the destination prefix with a configured forwarding next hop. It does not directly meet the ipv6 default static route need in this question.

D:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the ipv6 default static route need in this question.

Question 825

Two tenant networks need separate routing tables on the same Junos device. Which configuration or troubleshooting action most directly meets the need?

  1. Create separate routing-instances using the suitable virtual-router instance type.
  2. Inspect the inet.0 routing table with show route table inet.0.
  3. Run ping with the appropriate routing-instance context where the CLI supports it.
  4. Verify recursive resolution through an active route to the next-hop address.

Explanation

Correct Answer

A:

A virtual-router routing instance maintains its own routing information and logical interface membership. This meets the stated need for virtual-router routing instance.

Incorrect Answers

B:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the virtual-router routing instance need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the virtual-router routing instance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the virtual-router routing instance need in this question.

Question 826

Within Routing Fundamentals, a Junos engineer proposes the following response: Create separate routing-instances using the suitable virtual-router instance type. Which concept or operating procedure is best illustrated?

  1. Virtual-router routing instance
  2. Default IPv4 routing table
  3. Routing instance ping
  4. Recursive next-hop resolution

Explanation

Correct Answer

A:

A virtual-router routing instance maintains its own routing information and logical interface membership. This meets the stated need for virtual-router routing instance.

Incorrect Answers

B:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the virtual-router routing instance need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the virtual-router routing instance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the virtual-router routing instance need in this question.

Question 827

Two tenant networks need separate routing tables on the same Junos device. The proposed response is: Create separate routing-instances using the suitable virtual-router instance type. Which explanation most accurately supports this response?

  1. The default Junos IPv4 unicast RIB is normally named inet.0.
  2. A virtual-router routing instance maintains its own routing information and logical interface membership.
  3. Testing from the correct routing instance uses that instance's routing context rather than the default table.
  4. Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop.

Explanation

Correct Answer

B:

A virtual-router routing instance maintains its own routing information and logical interface membership. This meets the stated need for virtual-router routing instance.

Incorrect Answers

A:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the virtual-router routing instance need in this question.

C:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the virtual-router routing instance need in this question.

D:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the virtual-router routing instance need in this question.

Question 828

Within Routing Fundamentals, a technician selects this approach: Create separate routing-instances using the suitable virtual-router instance type. Which original requirement or fault would most directly justify it?

  1. A technician needs to inspect ordinary unicast IPv4 routes in the default routing instance.
  2. A destination is reachable in routing instance BLUE but not through the default routing table.
  3. A route has a next-hop IP that is not directly connected, so a second route is needed to reach that next hop.
  4. Two tenant networks need separate routing tables on the same Junos device.

Explanation

Correct Answer

D:

A virtual-router routing instance maintains its own routing information and logical interface membership. This meets the stated need for virtual-router routing instance.

Incorrect Answers

A:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the virtual-router routing instance need in this question.

B:

The routing instance ping scenario has a different requirement: Testing from the correct routing instance uses that instance's routing context rather than the default table. It does not directly meet the virtual-router routing instance need in this question.

C:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the virtual-router routing instance need in this question.

Question 829

A route belongs to routing instance BLUE rather than the default table. Which configuration or troubleshooting action most directly meets the need?

  1. Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes.
  2. Verify recursive resolution through an active route to the next-hop address.
  3. Use show route extensive for the relevant prefix.
  4. Configure an appropriate static discard route for that aggregate.

Explanation

Correct Answer

A:

Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. This meets the stated need for named routing-instance rib.

Incorrect Answers

B:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the named routing-instance rib need in this question.

C:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the named routing-instance rib need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the named routing-instance rib need in this question.

Question 830

Within Routing Fundamentals, a Junos engineer proposes the following response: Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes. Which concept or operating procedure is best illustrated?

  1. Recursive next-hop resolution
  2. Named routing-instance RIB
  3. Show active route detail
  4. Static route discard action

Explanation

Correct Answer

B:

Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. This meets the stated need for named routing-instance rib.

Incorrect Answers

A:

The recursive next-hop resolution scenario has a different requirement: Recursive next-hop resolution finds the outgoing adjacency by looking up the route toward the next hop. It does not directly meet the named routing-instance rib need in this question.

C:

The show active route detail scenario has a different requirement: Detailed route output reports attributes needed to understand the active route decision. It does not directly meet the named routing-instance rib need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the named routing-instance rib need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests