McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 82

Question 810

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure an appropriate static discard route for that aggregate. Which concept or operating procedure is best illustrated?

  1. IPv4 default static route
  2. Static route discard action
  3. Route selection tied to route preference
  4. Dynamic routing adjacency loss

Explanation

Correct Answer

B:

A static discard next hop silently drops matching traffic and can provide an aggregation safety route. This meets the stated need for static route discard action.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the static route discard action need in this question.

C:

The route selection tied to route preference scenario has a different requirement: For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. It does not directly meet the static route discard action need in this question.

D:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the static route discard action need in this question.

Question 811

A network should intentionally drop traffic to a configured aggregate when no more specific path exists. The proposed response is: Configure an appropriate static discard route for that aggregate. Which explanation most accurately supports this response?

  1. The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix.
  2. For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference.
  3. Dynamic routing protocols update route availability when their topology or neighbor state changes.
  4. A static discard next hop silently drops matching traffic and can provide an aggregation safety route.

Explanation

Correct Answer

D:

A static discard next hop silently drops matching traffic and can provide an aggregation safety route. This meets the stated need for static route discard action.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the static route discard action need in this question.

B:

The route selection tied to route preference scenario has a different requirement: For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. It does not directly meet the static route discard action need in this question.

C:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the static route discard action need in this question.

Question 812

Within Routing Fundamentals, a technician selects this approach: Configure an appropriate static discard route for that aggregate. Which original requirement or fault would most directly justify it?

  1. A network should intentionally drop traffic to a configured aggregate when no more specific path exists.
  2. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.
  3. An OSPF route and static route describe the same destination prefix; the static route has normal preference 5 and OSPF 10.
  4. An OSPF neighbor disappears and its previously learned remote prefixes become invalid.

Explanation

Correct Answer

A:

A static discard next hop silently drops matching traffic and can provide an aggregation safety route. This meets the stated need for static route discard action.

Incorrect Answers

B:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the static route discard action need in this question.

C:

The route selection tied to route preference scenario has a different requirement: For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. It does not directly meet the static route discard action need in this question.

D:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the static route discard action need in this question.

Question 813

A router should refuse traffic to a forbidden prefix with an explicit unreachable response rather than silently dropping it. Which configuration or troubleshooting action most directly meets the need?

  1. Inspect the inet.0 routing table with show route table inet.0.
  2. Use qualified-next-hop attributes with distinct preferences where supported.
  3. Configure a supported static reject route for the destination.
  4. Configure an appropriate static discard route for that aggregate.

Explanation

Correct Answer

C:

A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. This meets the stated need for static route reject action.

Incorrect Answers

A:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the static route reject action need in this question.

B:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the static route reject action need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the static route reject action need in this question.

Question 814

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure a supported static reject route for the destination. Which concept or operating procedure is best illustrated?

  1. Static route reject action
  2. Default IPv4 routing table
  3. Qualified static next hop
  4. Static route discard action

Explanation

Correct Answer

A:

A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. This meets the stated need for static route reject action.

Incorrect Answers

B:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the static route reject action need in this question.

C:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the static route reject action need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the static route reject action need in this question.

Question 815

A router should refuse traffic to a forbidden prefix with an explicit unreachable response rather than silently dropping it. The proposed response is: Configure a supported static reject route for the destination. Which explanation most accurately supports this response?

  1. The default Junos IPv4 unicast RIB is normally named inet.0.
  2. Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes.
  3. A static discard next hop silently drops matching traffic and can provide an aggregation safety route.
  4. A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard.

Explanation

Correct Answer

D:

A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. This meets the stated need for static route reject action.

Incorrect Answers

A:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the static route reject action need in this question.

B:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the static route reject action need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the static route reject action need in this question.

Question 816

Within Routing Fundamentals, a technician selects this approach: Configure a supported static reject route for the destination. Which original requirement or fault would most directly justify it?

  1. A technician needs to inspect ordinary unicast IPv4 routes in the default routing instance.
  2. Two static next hops for one destination should have different preferences for primary and backup behavior.
  3. A router should refuse traffic to a forbidden prefix with an explicit unreachable response rather than silently dropping it.
  4. A network should intentionally drop traffic to a configured aggregate when no more specific path exists.

Explanation

Correct Answer

C:

A static reject next hop discards matching traffic and can produce an unreachable indication, unlike silent discard. This meets the stated need for static route reject action.

Incorrect Answers

A:

The default ipv4 routing table scenario has a different requirement: The default Junos IPv4 unicast RIB is normally named inet.0. It does not directly meet the static route reject action need in this question.

B:

The qualified static next hop scenario has a different requirement: Qualified next hops permit alternate static paths to be prioritized with individual forwarding attributes. It does not directly meet the static route reject action need in this question.

D:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the static route reject action need in this question.

Question 817

A small office has one upstream gateway and needs a fallback for destinations not otherwise matched. Which configuration or troubleshooting action most directly meets the need?

  1. Configure an appropriate export policy for the BGP neighbor or group.
  2. Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop.
  3. Configure an appropriate static discard route for that aggregate.
  4. Use the 203.0.113.0/24 route despite its higher preference number.

Explanation

Correct Answer

B:

The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. This meets the stated need for ipv4 default static route.

Incorrect Answers

A:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 default static route need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the ipv4 default static route need in this question.

D:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the ipv4 default static route need in this question.

Question 818

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop. Which concept or operating procedure is best illustrated?

  1. IPv4 default static route
  2. Route export to neighbor
  3. Static route discard action
  4. Route preference and prefix length

Explanation

Correct Answer

A:

The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. This meets the stated need for ipv4 default static route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 default static route need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the ipv4 default static route need in this question.

D:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the ipv4 default static route need in this question.

Question 819

A small office has one upstream gateway and needs a fallback for destinations not otherwise matched. The proposed response is: Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop. Which explanation most accurately supports this response?

  1. The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix.
  2. A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it.
  3. A static discard next hop silently drops matching traffic and can provide an aggregation safety route.
  4. Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter.

Explanation

Correct Answer

A:

The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. This meets the stated need for ipv4 default static route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 default static route need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the ipv4 default static route need in this question.

D:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the ipv4 default static route need in this question.

Question 820

Within Routing Fundamentals, a technician selects this approach: Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop. Which original requirement or fault would most directly justify it?

  1. A small office has one upstream gateway and needs a fallback for destinations not otherwise matched.
  2. A static route is active locally but an external BGP peer does not receive it.
  3. A network should intentionally drop traffic to a configured aggregate when no more specific path exists.
  4. A router has 0.0.0.0/0 with preference 5 and 203.0.113.0/24 with preference 170; a packet targets 203.0.113.9.

Explanation

Correct Answer

A:

The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. This meets the stated need for ipv4 default static route.

Incorrect Answers

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the ipv4 default static route need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the ipv4 default static route need in this question.

D:

The route preference and prefix length scenario has a different requirement: Longest-prefix matching is applied to packet destinations before relative protocol preferences among equal prefixes matter. It does not directly meet the ipv4 default static route need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests