McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 81

Question 800

Within Routing Fundamentals, a technician selects this approach: Recognize the connected prefix as a Direct protocol route. Which original requirement or fault would most directly justify it?

  1. A configured routed interface is up and its on-link subnet appears in the routing table.
  2. A remote branch topology changes frequently and manually updating many static routes creates errors.
  3. The router has active routes 192.0.2.0/24 and 192.0.2.128/25, then receives traffic for 192.0.2.200.
  4. Two next hops reach the same destination with equal eligible routing cost and should both be usable.

Explanation

Correct Answer

A:

A directly connected network normally produces a Direct route while its participating interface is operational. This meets the stated need for direct route from interface.

Incorrect Answers

B:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the direct route from interface need in this question.

C:

The longest match /25 over /24 scenario has a different requirement: A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. It does not directly meet the direct route from interface need in this question.

D:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the direct route from interface need in this question.

Question 801

An interface has IPv4 address 192.0.2.2/30 and the router needs the host route for its own address. Which configuration or troubleshooting action most directly meets the need?

  1. Prefer the eligible route with preference 5 when normal selection rules apply.
  2. Configure an appropriate static discard route for that aggregate.
  3. Deploy a suitably configured OSPF adjacency and let the protocol advertise topology changes.
  4. Recognize the Local route for 192.0.2.2/32 in the RIB.

Explanation

Correct Answer

D:

Junos installs a local host route for the IP address owned by a configured logical interface. This meets the stated need for local interface host route.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the local interface host route need in this question.

B:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the local interface host route need in this question.

C:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the local interface host route need in this question.

Question 802

Within Routing Fundamentals, a Junos engineer proposes the following response: Recognize the Local route for 192.0.2.2/32 in the RIB. Which concept or operating procedure is best illustrated?

  1. Lower route preference
  2. Static route discard action
  3. OSPF dynamic route learning
  4. Local interface host route

Explanation

Correct Answer

D:

Junos installs a local host route for the IP address owned by a configured logical interface. This meets the stated need for local interface host route.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the local interface host route need in this question.

B:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the local interface host route need in this question.

C:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the local interface host route need in this question.

Question 803

An interface has IPv4 address 192.0.2.2/30 and the router needs the host route for its own address. The proposed response is: Recognize the Local route for 192.0.2.2/32 in the RIB. Which explanation most accurately supports this response?

  1. Junos route preference is a ranking in which a lower numeric preference is generally more preferred.
  2. Junos installs a local host route for the IP address owned by a configured logical interface.
  3. A static discard next hop silently drops matching traffic and can provide an aggregation safety route.
  4. OSPF exchanges link-state information and calculates internal best paths as topology changes.

Explanation

Correct Answer

B:

Junos installs a local host route for the IP address owned by a configured logical interface. This meets the stated need for local interface host route.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the local interface host route need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the local interface host route need in this question.

D:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the local interface host route need in this question.

Question 804

Within Routing Fundamentals, a technician selects this approach: Recognize the Local route for 192.0.2.2/32 in the RIB. Which original requirement or fault would most directly justify it?

  1. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.
  2. An interface has IPv4 address 192.0.2.2/30 and the router needs the host route for its own address.
  3. A network should intentionally drop traffic to a configured aggregate when no more specific path exists.
  4. A routed campus requires automatic learning of internal network changes rather than manually maintaining every prefix.

Explanation

Correct Answer

B:

Junos installs a local host route for the IP address owned by a configured logical interface. This meets the stated need for local interface host route.

Incorrect Answers

A:

The lower route preference scenario has a different requirement: Junos route preference is a ranking in which a lower numeric preference is generally more preferred. It does not directly meet the local interface host route need in this question.

C:

The static route discard action scenario has a different requirement: A static discard next hop silently drops matching traffic and can provide an aggregation safety route. It does not directly meet the local interface host route need in this question.

D:

The ospf dynamic route learning scenario has a different requirement: OSPF exchanges link-state information and calculates internal best paths as topology changes. It does not directly meet the local interface host route need in this question.

Question 805

A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1. Which configuration or troubleshooting action most directly meets the need?

  1. Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1.
  2. Configure a /32 host route for the single IPv4 destination.
  3. Create separate routing-instances using the suitable virtual-router instance type.
  4. Configure an appropriate export policy for the BGP neighbor or group.

Explanation

Correct Answer

A:

A Junos static route associates the destination prefix with a configured forwarding next hop. This meets the stated need for static route next hop.

Incorrect Answers

B:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the static route next hop need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the static route next hop need in this question.

D:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the static route next hop need in this question.

Question 806

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1. Which concept or operating procedure is best illustrated?

  1. IPv4 host route /32
  2. Virtual-router routing instance
  3. Static route next hop
  4. Route export to neighbor

Explanation

Correct Answer

C:

A Junos static route associates the destination prefix with a configured forwarding next hop. This meets the stated need for static route next hop.

Incorrect Answers

A:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the static route next hop need in this question.

B:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the static route next hop need in this question.

D:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the static route next hop need in this question.

Question 807

A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1. The proposed response is: Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1. Which explanation most accurately supports this response?

  1. An IPv4 /32 matches precisely one address and is more specific than broader subnets.
  2. A Junos static route associates the destination prefix with a configured forwarding next hop.
  3. A virtual-router routing instance maintains its own routing information and logical interface membership.
  4. A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it.

Explanation

Correct Answer

B:

A Junos static route associates the destination prefix with a configured forwarding next hop. This meets the stated need for static route next hop.

Incorrect Answers

A:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the static route next hop need in this question.

C:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the static route next hop need in this question.

D:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the static route next hop need in this question.

Question 808

Within Routing Fundamentals, a technician selects this approach: Configure routing-options static route 203.0.113.0/24 next-hop 192.0.2.1. Which original requirement or fault would most directly justify it?

  1. A static route should target exactly one IPv4 address without covering its neighbors.
  2. Two tenant networks need separate routing tables on the same Junos device.
  3. A branch router must reach 203.0.113.0/24 through adjacent router 192.0.2.1.
  4. A static route is active locally but an external BGP peer does not receive it.

Explanation

Correct Answer

C:

A Junos static route associates the destination prefix with a configured forwarding next hop. This meets the stated need for static route next hop.

Incorrect Answers

A:

The ipv4 host route /32 scenario has a different requirement: An IPv4 /32 matches precisely one address and is more specific than broader subnets. It does not directly meet the static route next hop need in this question.

B:

The virtual-router routing instance scenario has a different requirement: A virtual-router routing instance maintains its own routing information and logical interface membership. It does not directly meet the static route next hop need in this question.

D:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the static route next hop need in this question.

Question 809

A network should intentionally drop traffic to a configured aggregate when no more specific path exists. Which configuration or troubleshooting action most directly meets the need?

  1. Configure routing-options static route 0.0.0.0/0 with the reachable upstream next hop.
  2. Expect the eligible static route to be active unless another selection condition overrides it.
  3. Expect OSPF to withdraw or recalculate affected routes after detecting the failed adjacency.
  4. Configure an appropriate static discard route for that aggregate.

Explanation

Correct Answer

D:

A static discard next hop silently drops matching traffic and can provide an aggregation safety route. This meets the stated need for static route discard action.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the static route discard action need in this question.

B:

The route selection tied to route preference scenario has a different requirement: For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. It does not directly meet the static route discard action need in this question.

C:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the static route discard action need in this question.

Question 810

Within Routing Fundamentals, a Junos engineer proposes the following response: Configure an appropriate static discard route for that aggregate. Which concept or operating procedure is best illustrated?

  1. IPv4 default static route
  2. Static route discard action
  3. Route selection tied to route preference
  4. Dynamic routing adjacency loss

Explanation

Correct Answer

B:

A static discard next hop silently drops matching traffic and can provide an aggregation safety route. This meets the stated need for static route discard action.

Incorrect Answers

A:

The ipv4 default static route scenario has a different requirement: The 0/0 default route matches all IPv4 destinations not covered by a more-specific active prefix. It does not directly meet the static route discard action need in this question.

C:

The route selection tied to route preference scenario has a different requirement: For equal-length destination prefixes, Junos generally prefers the candidate with the lower numeric preference. It does not directly meet the static route discard action need in this question.

D:

The dynamic routing adjacency loss scenario has a different requirement: Dynamic routing protocols update route availability when their topology or neighbor state changes. It does not directly meet the static route discard action need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests