McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 80

Question 790

Within Routing Fundamentals, a Junos engineer proposes the following response: Identify the entry marked with an asterisk as the active selected route. Which concept or operating procedure is best illustrated?

  1. No matching IPv4 route
  2. Route export to neighbor
  3. Active route marker
  4. Static versus dynamic maintenance

Explanation

Correct Answer

C:

Junos route displays conventionally mark the active route with an asterisk after the route-entry bracket. This meets the stated need for active route marker.

Incorrect Answers

A:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the active route marker need in this question.

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the active route marker need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the active route marker need in this question.

Question 791

The output of show route contains several routes to one prefix and the operator needs the selected route. The proposed response is: Identify the entry marked with an asterisk as the active selected route. Which explanation most accurately supports this response?

  1. IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop.
  2. A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it.
  3. Junos route displays conventionally mark the active route with an asterisk after the route-entry bracket.
  4. Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance.

Explanation

Correct Answer

C:

Junos route displays conventionally mark the active route with an asterisk after the route-entry bracket. This meets the stated need for active route marker.

Incorrect Answers

A:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the active route marker need in this question.

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the active route marker need in this question.

D:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the active route marker need in this question.

Question 792

Within Routing Fundamentals, a technician selects this approach: Identify the entry marked with an asterisk as the active selected route. Which original requirement or fault would most directly justify it?

  1. A router has no matching destination route and no active default route.
  2. A static route is active locally but an external BGP peer does not receive it.
  3. A remote branch topology changes frequently and manually updating many static routes creates errors.
  4. The output of show route contains several routes to one prefix and the operator needs the selected route.

Explanation

Correct Answer

D:

Junos route displays conventionally mark the active route with an asterisk after the route-entry bracket. This meets the stated need for active route marker.

Incorrect Answers

A:

The no matching ipv4 route scenario has a different requirement: IP forwarding needs a matching installed route; a missing destination and default path cannot yield a valid next hop. It does not directly meet the active route marker need in this question.

B:

The route export to neighbor scenario has a different requirement: A route's presence in the local RIB alone does not guarantee that a routing protocol advertises it. It does not directly meet the active route marker need in this question.

C:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the active route marker need in this question.

Question 793

Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10. Which configuration or troubleshooting action most directly meets the need?

  1. Ping the next-hop IP on the directly attached link before blaming distant routes.
  2. Configure a static ::/0 route toward the valid IPv6 next hop.
  3. Inspect the BLUE.inet.0 table for that instance's IPv4 unicast routes.
  4. Prefer the eligible route with preference 5 when normal selection rules apply.

Explanation

Correct Answer

D:

Junos route preference is a ranking in which a lower numeric preference is generally more preferred. This meets the stated need for lower route preference.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the lower route preference need in this question.

B:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the lower route preference need in this question.

C:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the lower route preference need in this question.

Question 794

Within Routing Fundamentals, a Junos engineer proposes the following response: Prefer the eligible route with preference 5 when normal selection rules apply. Which concept or operating procedure is best illustrated?

  1. Direct default-gateway test
  2. Lower route preference
  3. IPv6 default static route
  4. Named routing-instance RIB

Explanation

Correct Answer

B:

Junos route preference is a ranking in which a lower numeric preference is generally more preferred. This meets the stated need for lower route preference.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the lower route preference need in this question.

C:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the lower route preference need in this question.

D:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the lower route preference need in this question.

Question 795

Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10. The proposed response is: Prefer the eligible route with preference 5 when normal selection rules apply. Which explanation most accurately supports this response?

  1. Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway.
  2. The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations.
  3. Junos route preference is a ranking in which a lower numeric preference is generally more preferred.
  4. Named Junos routing instances normally maintain their own tables such as BLUE.inet.0.

Explanation

Correct Answer

C:

Junos route preference is a ranking in which a lower numeric preference is generally more preferred. This meets the stated need for lower route preference.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the lower route preference need in this question.

B:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the lower route preference need in this question.

D:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the lower route preference need in this question.

Question 796

Within Routing Fundamentals, a technician selects this approach: Prefer the eligible route with preference 5 when normal selection rules apply. Which original requirement or fault would most directly justify it?

  1. A router's default next hop is 192.0.2.1 and the engineer must verify that this neighbor responds.
  2. Two routes have the same destination prefix but one has Junos preference 5 and the other preference 10.
  3. An IPv6 edge needs a catch-all upstream route for remote IPv6 destinations.
  4. A route belongs to routing instance BLUE rather than the default table.

Explanation

Correct Answer

B:

Junos route preference is a ranking in which a lower numeric preference is generally more preferred. This meets the stated need for lower route preference.

Incorrect Answers

A:

The direct default-gateway test scenario has a different requirement: Valid next-hop reachability is prerequisite evidence for successful forwarding through an upstream gateway. It does not directly meet the lower route preference need in this question.

C:

The ipv6 default static route scenario has a different requirement: The ::/0 prefix is the IPv6 default route and can provide a forwarding fallback for otherwise unmatched destinations. It does not directly meet the lower route preference need in this question.

D:

The named routing-instance rib scenario has a different requirement: Named Junos routing instances normally maintain their own tables such as BLUE.inet.0. It does not directly meet the lower route preference need in this question.

Question 797

A configured routed interface is up and its on-link subnet appears in the routing table. Which configuration or troubleshooting action most directly meets the need?

  1. Use an appropriate dynamic routing protocol instead of relying entirely on manually entered static routes.
  2. Forward using the 192.0.2.128/25 route.
  3. Configure or verify supported equal-cost multipath forwarding for the active route.
  4. Recognize the connected prefix as a Direct protocol route.

Explanation

Correct Answer

D:

A directly connected network normally produces a Direct route while its participating interface is operational. This meets the stated need for direct route from interface.

Incorrect Answers

A:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the direct route from interface need in this question.

B:

The longest match /25 over /24 scenario has a different requirement: A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. It does not directly meet the direct route from interface need in this question.

C:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the direct route from interface need in this question.

Question 798

Within Routing Fundamentals, a Junos engineer proposes the following response: Recognize the connected prefix as a Direct protocol route. Which concept or operating procedure is best illustrated?

  1. Static versus dynamic maintenance
  2. Longest match /25 over /24
  3. Direct route from interface
  4. Equal-cost multipath

Explanation

Correct Answer

C:

A directly connected network normally produces a Direct route while its participating interface is operational. This meets the stated need for direct route from interface.

Incorrect Answers

A:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the direct route from interface need in this question.

B:

The longest match /25 over /24 scenario has a different requirement: A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. It does not directly meet the direct route from interface need in this question.

D:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the direct route from interface need in this question.

Question 799

A configured routed interface is up and its on-link subnet appears in the routing table. The proposed response is: Recognize the connected prefix as a Direct protocol route. Which explanation most accurately supports this response?

  1. A directly connected network normally produces a Direct route while its participating interface is operational.
  2. Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance.
  3. A longer /25 prefix takes precedence over an overlapping /24 for matching destinations.
  4. ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops.

Explanation

Correct Answer

A:

A directly connected network normally produces a Direct route while its participating interface is operational. This meets the stated need for direct route from interface.

Incorrect Answers

B:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the direct route from interface need in this question.

C:

The longest match /25 over /24 scenario has a different requirement: A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. It does not directly meet the direct route from interface need in this question.

D:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the direct route from interface need in this question.

Question 800

Within Routing Fundamentals, a technician selects this approach: Recognize the connected prefix as a Direct protocol route. Which original requirement or fault would most directly justify it?

  1. A configured routed interface is up and its on-link subnet appears in the routing table.
  2. A remote branch topology changes frequently and manually updating many static routes creates errors.
  3. The router has active routes 192.0.2.0/24 and 192.0.2.128/25, then receives traffic for 192.0.2.200.
  4. Two next hops reach the same destination with equal eligible routing cost and should both be usable.

Explanation

Correct Answer

A:

A directly connected network normally produces a Direct route while its participating interface is operational. This meets the stated need for direct route from interface.

Incorrect Answers

B:

The static versus dynamic maintenance scenario has a different requirement: Dynamic protocols adapt route advertisements to topology changes and reduce manual route maintenance. It does not directly meet the direct route from interface need in this question.

C:

The longest match /25 over /24 scenario has a different requirement: A longer /25 prefix takes precedence over an overlapping /24 for matching destinations. It does not directly meet the direct route from interface need in this question.

D:

The equal-cost multipath scenario has a different requirement: ECMP allows a router to distribute traffic over multiple eligible equal-cost next hops. It does not directly meet the direct route from interface need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests