McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 7

Question 60

Within Networking Fundamentals, a technician selects this approach: Choose the /25 route for that destination when both routes are active. Which original requirement or fault would most directly justify it?

  1. A network technician must convert the binary octet 11000000 to decimal.
  2. A router learns 203.0.113.0/24 and the more-specific 203.0.113.128/25, then forwards to 203.0.113.140.
  3. A frame must be delivered by switches to all ports in its local Ethernet broadcast domain.
  4. A large packet repeatedly fails across a link with an MTU smaller than its total size.

Explanation

Correct Answer

B:

IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. This meets the stated need for longest-prefix matching.

Incorrect Answers

A:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the longest-prefix matching need in this question.

C:

The ethernet broadcast destination scenario has a different requirement: The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. It does not directly meet the longest-prefix matching need in this question.

D:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the longest-prefix matching need in this question.

Question 61

A team must determine the directed broadcast address of the 192.0.2.64/27 subnet. Which configuration or troubleshooting action most directly meets the need?

  1. Identify 192.0.2.95 as the subnet's directed broadcast address.
  2. Allocate an IPv4 /27 subnet for the 30-host segment.
  3. Introduce a Layer 3 router or routed switch interface between the two IP networks.
  4. Treat an IPv6 address as 128 bits rather than 32 bits.

Explanation

Correct Answer

A:

A /27 spans 32 addresses, so the.64 subnet ends with the all-host-bits-one address.95. This meets the stated need for ipv4 broadcast address.

Incorrect Answers

B:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ipv4 broadcast address need in this question.

C:

The router versus switch function scenario has a different requirement: Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets. It does not directly meet the ipv4 broadcast address need in this question.

D:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 broadcast address need in this question.

Question 62

Within Networking Fundamentals, a Junos engineer proposes the following response: Identify 192.0.2.95 as the subnet's directed broadcast address. Which concept or operating procedure is best illustrated?

  1. IPv4 /27 usable hosts
  2. IPv4 broadcast address
  3. Router versus switch function
  4. IPv6 address width

Explanation

Correct Answer

B:

A /27 spans 32 addresses, so the.64 subnet ends with the all-host-bits-one address.95. This meets the stated need for ipv4 broadcast address.

Incorrect Answers

A:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ipv4 broadcast address need in this question.

C:

The router versus switch function scenario has a different requirement: Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets. It does not directly meet the ipv4 broadcast address need in this question.

D:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 broadcast address need in this question.

Question 63

A team must determine the directed broadcast address of the 192.0.2.64/27 subnet. The proposed response is: Identify 192.0.2.95 as the subnet's directed broadcast address. Which explanation most accurately supports this response?

  1. A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts.
  2. Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets.
  3. A /27 spans 32 addresses, so the .64 subnet ends with the all-host-bits-one address .95.
  4. IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses.

Explanation

Correct Answer

C:

A /27 spans 32 addresses, so the.64 subnet ends with the all-host-bits-one address.95. This meets the stated need for ipv4 broadcast address.

Incorrect Answers

A:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ipv4 broadcast address need in this question.

B:

The router versus switch function scenario has a different requirement: Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets. It does not directly meet the ipv4 broadcast address need in this question.

D:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 broadcast address need in this question.

Question 64

Within Networking Fundamentals, a technician selects this approach: Identify 192.0.2.95 as the subnet's directed broadcast address. Which original requirement or fault would most directly justify it?

  1. A network engineer must choose a subnet with 30 ordinary IPv4 host addresses.
  2. A team must determine the directed broadcast address of the 192.0.2.64/27 subnet.
  3. Hosts in two different IP subnets must communicate, but only an unmanaged Layer 2 switch connects them.
  4. An engineer must compare the address space of IPv6 with 32-bit IPv4 addresses.

Explanation

Correct Answer

B:

A /27 spans 32 addresses, so the.64 subnet ends with the all-host-bits-one address.95. This meets the stated need for ipv4 broadcast address.

Incorrect Answers

A:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ipv4 broadcast address need in this question.

C:

The router versus switch function scenario has a different requirement: Layer 3 forwarding selects an outgoing path using destination IP prefixes; ordinary Layer 2 switching does not route between subnets. It does not directly meet the ipv4 broadcast address need in this question.

D:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 broadcast address need in this question.

Question 65

An engineer must compare the address space of IPv6 with 32-bit IPv4 addresses. Which configuration or troubleshooting action most directly meets the need?

  1. Select UDP and provide any required reliability in the application.
  2. Treat an IPv6 address as 128 bits rather than 32 bits.
  3. Use the parent aggregate 2001:db8:100::/63 when advertising those adjacent subnets.
  4. Convert decimal 13 to 00001101 in eight-bit binary notation.

Explanation

Correct Answer

B:

IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. This meets the stated need for ipv6 address width.

Incorrect Answers

A:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv6 address width need in this question.

C:

The ipv6 prefix summarization scenario has a different requirement: Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. It does not directly meet the ipv6 address width need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the ipv6 address width need in this question.

Question 66

Within Networking Fundamentals, a Junos engineer proposes the following response: Treat an IPv6 address as 128 bits rather than 32 bits. Which concept or operating procedure is best illustrated?

  1. UDP connectionless transport
  2. IPv6 address width
  3. IPv6 prefix summarization
  4. Decimal to binary conversion

Explanation

Correct Answer

B:

IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. This meets the stated need for ipv6 address width.

Incorrect Answers

A:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv6 address width need in this question.

C:

The ipv6 prefix summarization scenario has a different requirement: Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. It does not directly meet the ipv6 address width need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the ipv6 address width need in this question.

Question 67

An engineer must compare the address space of IPv6 with 32-bit IPv4 addresses. The proposed response is: Treat an IPv6 address as 128 bits rather than 32 bits. Which explanation most accurately supports this response?

  1. UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees.
  2. Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary.
  3. IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses.
  4. Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set.

Explanation

Correct Answer

C:

IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. This meets the stated need for ipv6 address width.

Incorrect Answers

A:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv6 address width need in this question.

B:

The ipv6 prefix summarization scenario has a different requirement: Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. It does not directly meet the ipv6 address width need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the ipv6 address width need in this question.

Question 68

Within Networking Fundamentals, a technician selects this approach: Treat an IPv6 address as 128 bits rather than 32 bits. Which original requirement or fault would most directly justify it?

  1. A real-time telemetry sender wants a lightweight datagram service without a built-in reliability handshake.
  2. An engineer must compare the address space of IPv6 with 32-bit IPv4 addresses.
  3. A company wants to aggregate 2001:db8:100:0::/64 and 2001:db8:100:1::/64 without covering additional /64 networks.
  4. An addressing exercise asks for the eight-bit unsigned binary representation of decimal 13.

Explanation

Correct Answer

B:

IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. This meets the stated need for ipv6 address width.

Incorrect Answers

A:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv6 address width need in this question.

C:

The ipv6 prefix summarization scenario has a different requirement: Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. It does not directly meet the ipv6 address width need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the ipv6 address width need in this question.

Question 69

Two routers on the same Ethernet segment exchange IPv6 neighbor messages without globally routable addresses. Which configuration or troubleshooting action most directly meets the need?

  1. Select TCP with its connection establishment and acknowledgment behavior.
  2. Choose the /25 route for that destination when both routes are active.
  3. Use valid FE80::/10 link-local IPv6 addresses on the local segment.
  4. Convert decimal 13 to 00001101 in eight-bit binary notation.

Explanation

Correct Answer

C:

IPv6 link-local unicast addresses are for local-link communication and are not routed across ordinary routers. This meets the stated need for ipv6 link-local scope.

Incorrect Answers

A:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ipv6 link-local scope need in this question.

B:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the ipv6 link-local scope need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the ipv6 link-local scope need in this question.

Question 70

Within Networking Fundamentals, a Junos engineer proposes the following response: Use valid FE80::/10 link-local IPv6 addresses on the local segment. Which concept or operating procedure is best illustrated?

  1. TCP connection setup
  2. Longest-prefix matching
  3. IPv6 link-local scope
  4. Decimal to binary conversion

Explanation

Correct Answer

C:

IPv6 link-local unicast addresses are for local-link communication and are not routed across ordinary routers. This meets the stated need for ipv6 link-local scope.

Incorrect Answers

A:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ipv6 link-local scope need in this question.

B:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the ipv6 link-local scope need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the ipv6 link-local scope need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests