McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 9

Question 80

Within Networking Fundamentals, a technician selects this approach: Learn the default router from IPv6 Router Advertisements rather than using ARP. Which original requirement or fault would most directly justify it?

  1. A host must learn which on-link IPv6 router can forward packets to destinations outside its subnet.
  2. A technician wants a quick IP-level reachability test that measures round-trip replies.
  3. A new Ethernet destination MAC address is absent from a switch's forwarding table.
  4. A frame must be delivered by switches to all ports in its local Ethernet broadcast domain.

Explanation

Correct Answer

A:

IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. This meets the stated need for ipv6 default-router discovery.

Incorrect Answers

B:

The icmp echo reachability scenario has a different requirement: Ping normally tests reachability by sending ICMP echo requests and observing returned echo replies. It does not directly meet the ipv6 default-router discovery need in this question.

C:

The unknown-unicast flooding scenario has a different requirement: A bridge cannot select one outgoing port for an unknown destination, so it floods eligible ports in that broadcast domain. It does not directly meet the ipv6 default-router discovery need in this question.

D:

The ethernet broadcast destination scenario has a different requirement: The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. It does not directly meet the ipv6 default-router discovery need in this question.

Question 81

An application needs reliable ordered delivery over an established byte-stream connection. Which configuration or troubleshooting action most directly meets the need?

  1. Use ICMPv6 Neighbor Solicitation and Neighbor Advertisement rather than IPv4 ARP.
  2. Advertise their common aggregate 198.51.100.0/23 where policy permits.
  3. Select TCP with its connection establishment and acknowledgment behavior.
  4. Interpret 11000000 as decimal 192.

Explanation

Correct Answer

C:

TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. This meets the stated need for tcp connection setup.

Incorrect Answers

A:

The ipv6 neighbor discovery scenario has a different requirement: IPv6 Neighbor Discovery replaces ARP with ICMPv6 messages for neighbor address resolution. It does not directly meet the tcp connection setup need in this question.

B:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the tcp connection setup need in this question.

D:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the tcp connection setup need in this question.

Question 82

Within Networking Fundamentals, a Junos engineer proposes the following response: Select TCP with its connection establishment and acknowledgment behavior. Which concept or operating procedure is best illustrated?

  1. IPv6 neighbor discovery
  2. Contiguous route summarization
  3. TCP connection setup
  4. Binary to decimal conversion

Explanation

Correct Answer

C:

TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. This meets the stated need for tcp connection setup.

Incorrect Answers

A:

The ipv6 neighbor discovery scenario has a different requirement: IPv6 Neighbor Discovery replaces ARP with ICMPv6 messages for neighbor address resolution. It does not directly meet the tcp connection setup need in this question.

B:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the tcp connection setup need in this question.

D:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the tcp connection setup need in this question.

Question 83

An application needs reliable ordered delivery over an established byte-stream connection. The proposed response is: Select TCP with its connection establishment and acknowledgment behavior. Which explanation most accurately supports this response?

  1. IPv6 Neighbor Discovery replaces ARP with ICMPv6 messages for neighbor address resolution.
  2. The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks.
  3. The two high bits have values 128 and 64, yielding 192 when both are set.
  4. TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission.

Explanation

Correct Answer

D:

TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. This meets the stated need for tcp connection setup.

Incorrect Answers

A:

The ipv6 neighbor discovery scenario has a different requirement: IPv6 Neighbor Discovery replaces ARP with ICMPv6 messages for neighbor address resolution. It does not directly meet the tcp connection setup need in this question.

B:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the tcp connection setup need in this question.

C:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the tcp connection setup need in this question.

Question 84

Within Networking Fundamentals, a technician selects this approach: Select TCP with its connection establishment and acknowledgment behavior. Which original requirement or fault would most directly justify it?

  1. An application needs reliable ordered delivery over an established byte-stream connection.
  2. An IPv6 host needs the MAC address associated with a neighbor's on-link IPv6 address.
  3. Two adjacent IPv4 networks, 198.51.100.0/24 and 198.51.101.0/24, should be summarized without adding unrelated networks.
  4. A network technician must convert the binary octet 11000000 to decimal.

Explanation

Correct Answer

A:

TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. This meets the stated need for tcp connection setup.

Incorrect Answers

B:

The ipv6 neighbor discovery scenario has a different requirement: IPv6 Neighbor Discovery replaces ARP with ICMPv6 messages for neighbor address resolution. It does not directly meet the tcp connection setup need in this question.

C:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the tcp connection setup need in this question.

D:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the tcp connection setup need in this question.

Question 85

A real-time telemetry sender wants a lightweight datagram service without a built-in reliability handshake. Which configuration or troubleshooting action most directly meets the need?

  1. Select UDP and provide any required reliability in the application.
  2. Identify the subnet mask as a /25 prefix.
  3. Plan for 254 ordinary usable IPv4 host addresses in that /24 subnet.
  4. Resolve the destination host's MAC and send directly rather than via the default gateway.

Explanation

Correct Answer

A:

UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. This meets the stated need for udp connectionless transport.

Incorrect Answers

B:

The subnet mask /25 interpretation scenario has a different requirement: The first 25 mask bits are set to one: 24 bits in the first three octets and one more in 128. It does not directly meet the udp connectionless transport need in this question.

C:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the udp connectionless transport need in this question.

D:

The same-subnet direct forwarding scenario has a different requirement: An on-link IPv4 destination is delivered locally at Layer 2 after neighbor resolution. It does not directly meet the udp connectionless transport need in this question.

Question 86

Within Networking Fundamentals, a Junos engineer proposes the following response: Select UDP and provide any required reliability in the application. Which concept or operating procedure is best illustrated?

  1. Subnet mask /25 interpretation
  2. IPv4 /24 usable hosts
  3. UDP connectionless transport
  4. Same-subnet direct forwarding

Explanation

Correct Answer

C:

UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. This meets the stated need for udp connectionless transport.

Incorrect Answers

A:

The subnet mask /25 interpretation scenario has a different requirement: The first 25 mask bits are set to one: 24 bits in the first three octets and one more in 128. It does not directly meet the udp connectionless transport need in this question.

B:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the udp connectionless transport need in this question.

D:

The same-subnet direct forwarding scenario has a different requirement: An on-link IPv4 destination is delivered locally at Layer 2 after neighbor resolution. It does not directly meet the udp connectionless transport need in this question.

Question 87

A real-time telemetry sender wants a lightweight datagram service without a built-in reliability handshake. The proposed response is: Select UDP and provide any required reliability in the application. Which explanation most accurately supports this response?

  1. The first 25 mask bits are set to one: 24 bits in the first three octets and one more in 128.
  2. A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved.
  3. An on-link IPv4 destination is delivered locally at Layer 2 after neighbor resolution.
  4. UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees.

Explanation

Correct Answer

D:

UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. This meets the stated need for udp connectionless transport.

Incorrect Answers

A:

The subnet mask /25 interpretation scenario has a different requirement: The first 25 mask bits are set to one: 24 bits in the first three octets and one more in 128. It does not directly meet the udp connectionless transport need in this question.

B:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the udp connectionless transport need in this question.

C:

The same-subnet direct forwarding scenario has a different requirement: An on-link IPv4 destination is delivered locally at Layer 2 after neighbor resolution. It does not directly meet the udp connectionless transport need in this question.

Question 88

Within Networking Fundamentals, a technician selects this approach: Select UDP and provide any required reliability in the application. Which original requirement or fault would most directly justify it?

  1. A real-time telemetry sender wants a lightweight datagram service without a built-in reliability handshake.
  2. An IPv4 endpoint uses mask 255.255.255.128 and an engineer must state its prefix length.
  3. An IPv4 LAN uses a conventional /24 mask and reserves network and broadcast addresses.
  4. A host at 192.0.2.10/24 wants to reach 192.0.2.20 on the same Ethernet VLAN.

Explanation

Correct Answer

A:

UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. This meets the stated need for udp connectionless transport.

Incorrect Answers

B:

The subnet mask /25 interpretation scenario has a different requirement: The first 25 mask bits are set to one: 24 bits in the first three octets and one more in 128. It does not directly meet the udp connectionless transport need in this question.

C:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the udp connectionless transport need in this question.

D:

The same-subnet direct forwarding scenario has a different requirement: An on-link IPv4 destination is delivered locally at Layer 2 after neighbor resolution. It does not directly meet the udp connectionless transport need in this question.

Question 89

A packet capture shows SYN, SYN-ACK, and ACK before payload exchange. Which configuration or troubleshooting action most directly meets the need?

  1. Classify the sequence as TCP's three-way connection handshake.
  2. Treat an IPv6 address as 128 bits rather than 32 bits.
  3. Configure its switchport as an access port in the finance VLAN.
  4. Configure a VLAN-tagged 802.1Q trunk with the intended VLAN membership on both ends.

Explanation

Correct Answer

A:

The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. This meets the stated need for tcp three-way handshake.

Incorrect Answers

B:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the tcp three-way handshake need in this question.

C:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the tcp three-way handshake need in this question.

D:

The ieee 802.1q trunking scenario has a different requirement: 802.1Q VLAN tags identify the logical Layer 2 segment carried over a shared physical link. It does not directly meet the tcp three-way handshake need in this question.

Question 90

Within Networking Fundamentals, a Junos engineer proposes the following response: Classify the sequence as TCP's three-way connection handshake. Which concept or operating procedure is best illustrated?

  1. TCP three-way handshake
  2. IPv6 address width
  3. Access-port VLAN assignment
  4. IEEE 802.1Q trunking

Explanation

Correct Answer

A:

The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. This meets the stated need for tcp three-way handshake.

Incorrect Answers

B:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the tcp three-way handshake need in this question.

C:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the tcp three-way handshake need in this question.

D:

The ieee 802.1q trunking scenario has a different requirement: 802.1Q VLAN tags identify the logical Layer 2 segment carried over a shared physical link. It does not directly meet the tcp three-way handshake need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests