McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 6

Question 50

Within Networking Fundamentals, a Junos engineer proposes the following response: Identify the containing network as 192.0.2.128/26. Which concept or operating procedure is best illustrated?

  1. Access-port VLAN assignment
  2. IPv4 /26 network boundary
  3. IPv4 /27 usable hosts
  4. Ethernet source-MAC learning

Explanation

Correct Answer

B:

A /26 advances in blocks of 64 in the last octet, so.143 lies inside the.128 through.191 subnet. This meets the stated need for ipv4 /26 network boundary.

Incorrect Answers

A:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the ipv4 /26 network boundary need in this question.

C:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ipv4 /26 network boundary need in this question.

D:

The ethernet source-mac learning scenario has a different requirement: Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames. It does not directly meet the ipv4 /26 network boundary need in this question.

Question 51

A server uses address 192.0.2.143 with a /26 prefix and needs its correct subnet identifier. The proposed response is: Identify the containing network as 192.0.2.128/26. Which explanation most accurately supports this response?

  1. An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags.
  2. A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts.
  3. Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames.
  4. A /26 advances in blocks of 64 in the last octet, so .143 lies inside the .128 through .191 subnet.

Explanation

Correct Answer

D:

A /26 advances in blocks of 64 in the last octet, so.143 lies inside the.128 through.191 subnet. This meets the stated need for ipv4 /26 network boundary.

Incorrect Answers

A:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the ipv4 /26 network boundary need in this question.

B:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ipv4 /26 network boundary need in this question.

C:

The ethernet source-mac learning scenario has a different requirement: Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames. It does not directly meet the ipv4 /26 network boundary need in this question.

Question 52

Within Networking Fundamentals, a technician selects this approach: Identify the containing network as 192.0.2.128/26. Which original requirement or fault would most directly justify it?

  1. An ordinary workstation sends untagged frames and must be assigned to the finance broadcast domain.
  2. A network engineer must choose a subnet with 30 ordinary IPv4 host addresses.
  3. A switch initially has no forwarding entry for a newly connected host's Ethernet address.
  4. A server uses address 192.0.2.143 with a /26 prefix and needs its correct subnet identifier.

Explanation

Correct Answer

D:

A /26 advances in blocks of 64 in the last octet, so.143 lies inside the.128 through.191 subnet. This meets the stated need for ipv4 /26 network boundary.

Incorrect Answers

A:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the ipv4 /26 network boundary need in this question.

B:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the ipv4 /26 network boundary need in this question.

C:

The ethernet source-mac learning scenario has a different requirement: Ethernet switches populate their forwarding database from source MAC addresses observed on ingress frames. It does not directly meet the ipv4 /26 network boundary need in this question.

Question 53

Two adjacent IPv4 networks, 198.51.100.0/24 and 198.51.101.0/24, should be summarized without adding unrelated networks. Which configuration or troubleshooting action most directly meets the need?

  1. Assign a /30 subnet with the two middle IPv4 addresses to the routers.
  2. Select UDP and provide any required reliability in the application.
  3. Use an active 0.0.0.0/0 default route toward the upstream gateway.
  4. Advertise their common aggregate 198.51.100.0/23 where policy permits.

Explanation

Correct Answer

D:

The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. This meets the stated need for contiguous route summarization.

Incorrect Answers

A:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the contiguous route summarization need in this question.

B:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the contiguous route summarization need in this question.

C:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the contiguous route summarization need in this question.

Question 54

Within Networking Fundamentals, a Junos engineer proposes the following response: Advertise their common aggregate 198.51.100.0/23 where policy permits. Which concept or operating procedure is best illustrated?

  1. Contiguous route summarization
  2. IPv4 /30 point-to-point
  3. UDP connectionless transport
  4. IPv4 default route

Explanation

Correct Answer

A:

The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. This meets the stated need for contiguous route summarization.

Incorrect Answers

B:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the contiguous route summarization need in this question.

C:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the contiguous route summarization need in this question.

D:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the contiguous route summarization need in this question.

Question 55

Two adjacent IPv4 networks, 198.51.100.0/24 and 198.51.101.0/24, should be summarized without adding unrelated networks. The proposed response is: Advertise their common aggregate 198.51.100.0/23 where policy permits. Which explanation most accurately supports this response?

  1. A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses.
  2. UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees.
  3. The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks.
  4. The IPv4 default route matches any destination without a more-specific active prefix.

Explanation

Correct Answer

C:

The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. This meets the stated need for contiguous route summarization.

Incorrect Answers

A:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the contiguous route summarization need in this question.

B:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the contiguous route summarization need in this question.

D:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the contiguous route summarization need in this question.

Question 56

Within Networking Fundamentals, a technician selects this approach: Advertise their common aggregate 198.51.100.0/23 where policy permits. Which original requirement or fault would most directly justify it?

  1. A legacy IPv4 point-to-point link requires exactly two conventional usable host addresses.
  2. A real-time telemetry sender wants a lightweight datagram service without a built-in reliability handshake.
  3. A branch router has no more specific route for a public destination but has an upstream Internet gateway.
  4. Two adjacent IPv4 networks, 198.51.100.0/24 and 198.51.101.0/24, should be summarized without adding unrelated networks.

Explanation

Correct Answer

D:

The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. This meets the stated need for contiguous route summarization.

Incorrect Answers

A:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the contiguous route summarization need in this question.

B:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the contiguous route summarization need in this question.

C:

The ipv4 default route scenario has a different requirement: The IPv4 default route matches any destination without a more-specific active prefix. It does not directly meet the contiguous route summarization need in this question.

Question 57

A router learns 203.0.113.0/24 and the more-specific 203.0.113.128/25, then forwards to 203.0.113.140. Which configuration or troubleshooting action most directly meets the need?

  1. Interpret 11000000 as decimal 192.
  2. Use destination MAC FF:FF:FF:FF:FF:FF for a Layer 2 broadcast frame.
  3. Choose the /25 route for that destination when both routes are active.
  4. Validate the path MTU and account for fragmentation or packet-size adjustment where supported.

Explanation

Correct Answer

C:

IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. This meets the stated need for longest-prefix matching.

Incorrect Answers

A:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the longest-prefix matching need in this question.

B:

The ethernet broadcast destination scenario has a different requirement: The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. It does not directly meet the longest-prefix matching need in this question.

D:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the longest-prefix matching need in this question.

Question 58

Within Networking Fundamentals, a Junos engineer proposes the following response: Choose the /25 route for that destination when both routes are active. Which concept or operating procedure is best illustrated?

  1. Binary to decimal conversion
  2. Ethernet broadcast destination
  3. Longest-prefix matching
  4. IPv4 packet MTU

Explanation

Correct Answer

C:

IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. This meets the stated need for longest-prefix matching.

Incorrect Answers

A:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the longest-prefix matching need in this question.

B:

The ethernet broadcast destination scenario has a different requirement: The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. It does not directly meet the longest-prefix matching need in this question.

D:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the longest-prefix matching need in this question.

Question 59

A router learns 203.0.113.0/24 and the more-specific 203.0.113.128/25, then forwards to 203.0.113.140. The proposed response is: Choose the /25 route for that destination when both routes are active. Which explanation most accurately supports this response?

  1. The two high bits have values 128 and 64, yielding 192 when both are set.
  2. IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence.
  3. The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN.
  4. An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling.

Explanation

Correct Answer

B:

IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. This meets the stated need for longest-prefix matching.

Incorrect Answers

A:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the longest-prefix matching need in this question.

C:

The ethernet broadcast destination scenario has a different requirement: The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. It does not directly meet the longest-prefix matching need in this question.

D:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the longest-prefix matching need in this question.

Question 60

Within Networking Fundamentals, a technician selects this approach: Choose the /25 route for that destination when both routes are active. Which original requirement or fault would most directly justify it?

  1. A network technician must convert the binary octet 11000000 to decimal.
  2. A router learns 203.0.113.0/24 and the more-specific 203.0.113.128/25, then forwards to 203.0.113.140.
  3. A frame must be delivered by switches to all ports in its local Ethernet broadcast domain.
  4. A large packet repeatedly fails across a link with an MTU smaller than its total size.

Explanation

Correct Answer

B:

IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. This meets the stated need for longest-prefix matching.

Incorrect Answers

A:

The binary to decimal conversion scenario has a different requirement: The two high bits have values 128 and 64, yielding 192 when both are set. It does not directly meet the longest-prefix matching need in this question.

C:

The ethernet broadcast destination scenario has a different requirement: The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. It does not directly meet the longest-prefix matching need in this question.

D:

The ipv4 packet mtu scenario has a different requirement: An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. It does not directly meet the longest-prefix matching need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests