McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 14

Question 130

Within Networking Fundamentals, a Junos engineer proposes the following response: Interpret 11000000 as decimal 192. Which concept or operating procedure is best illustrated?

  1. Access-port VLAN assignment
  2. IPv4 /27 usable hosts
  3. IPv4 /30 point-to-point
  4. Binary to decimal conversion

Explanation

Correct Answer

D:

The two high bits have values 128 and 64, yielding 192 when both are set. This meets the stated need for binary to decimal conversion.

Incorrect Answers

A:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the binary to decimal conversion need in this question.

B:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the binary to decimal conversion need in this question.

C:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the binary to decimal conversion need in this question.

Question 131

A network technician must convert the binary octet 11000000 to decimal. The proposed response is: Interpret 11000000 as decimal 192. Which explanation most accurately supports this response?

  1. The two high bits have values 128 and 64, yielding 192 when both are set.
  2. An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags.
  3. A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts.
  4. A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses.

Explanation

Correct Answer

A:

The two high bits have values 128 and 64, yielding 192 when both are set. This meets the stated need for binary to decimal conversion.

Incorrect Answers

B:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the binary to decimal conversion need in this question.

C:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the binary to decimal conversion need in this question.

D:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the binary to decimal conversion need in this question.

Question 132

Within Networking Fundamentals, a technician selects this approach: Interpret 11000000 as decimal 192. Which original requirement or fault would most directly justify it?

  1. An ordinary workstation sends untagged frames and must be assigned to the finance broadcast domain.
  2. A network engineer must choose a subnet with 30 ordinary IPv4 host addresses.
  3. A legacy IPv4 point-to-point link requires exactly two conventional usable host addresses.
  4. A network technician must convert the binary octet 11000000 to decimal.

Explanation

Correct Answer

D:

The two high bits have values 128 and 64, yielding 192 when both are set. This meets the stated need for binary to decimal conversion.

Incorrect Answers

A:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the binary to decimal conversion need in this question.

B:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the binary to decimal conversion need in this question.

C:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the binary to decimal conversion need in this question.

Question 133

A frame must be delivered by switches to all ports in its local Ethernet broadcast domain. Which configuration or troubleshooting action most directly meets the need?

  1. Identify the containing network as 192.0.2.128/26.
  2. Classify the sequence as TCP's three-way connection handshake.
  3. Use destination MAC FF:FF:FF:FF:FF:FF for a Layer 2 broadcast frame.
  4. Learn the default router from IPv6 Router Advertisements rather than using ARP.

Explanation

Correct Answer

C:

The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. This meets the stated need for ethernet broadcast destination.

Incorrect Answers

A:

The ipv4 /26 network boundary scenario has a different requirement: A /26 advances in blocks of 64 in the last octet, so .143 lies inside the .128 through .191 subnet. It does not directly meet the ethernet broadcast destination need in this question.

B:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the ethernet broadcast destination need in this question.

D:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the ethernet broadcast destination need in this question.

Question 134

Within Networking Fundamentals, a Junos engineer proposes the following response: Use destination MAC FF:FF:FF:FF:FF:FF for a Layer 2 broadcast frame. Which concept or operating procedure is best illustrated?

  1. IPv4 /26 network boundary
  2. TCP three-way handshake
  3. Ethernet broadcast destination
  4. IPv6 default-router discovery

Explanation

Correct Answer

C:

The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. This meets the stated need for ethernet broadcast destination.

Incorrect Answers

A:

The ipv4 /26 network boundary scenario has a different requirement: A /26 advances in blocks of 64 in the last octet, so .143 lies inside the .128 through .191 subnet. It does not directly meet the ethernet broadcast destination need in this question.

B:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the ethernet broadcast destination need in this question.

D:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the ethernet broadcast destination need in this question.

Question 135

A frame must be delivered by switches to all ports in its local Ethernet broadcast domain. The proposed response is: Use destination MAC FF:FF:FF:FF:FF:FF for a Layer 2 broadcast frame. Which explanation most accurately supports this response?

  1. A /26 advances in blocks of 64 in the last octet, so .143 lies inside the .128 through .191 subnet.
  2. The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN.
  3. The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established.
  4. IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding.

Explanation

Correct Answer

B:

The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. This meets the stated need for ethernet broadcast destination.

Incorrect Answers

A:

The ipv4 /26 network boundary scenario has a different requirement: A /26 advances in blocks of 64 in the last octet, so .143 lies inside the .128 through .191 subnet. It does not directly meet the ethernet broadcast destination need in this question.

C:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the ethernet broadcast destination need in this question.

D:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the ethernet broadcast destination need in this question.

Question 136

Within Networking Fundamentals, a technician selects this approach: Use destination MAC FF:FF:FF:FF:FF:FF for a Layer 2 broadcast frame. Which original requirement or fault would most directly justify it?

  1. A server uses address 192.0.2.143 with a /26 prefix and needs its correct subnet identifier.
  2. A frame must be delivered by switches to all ports in its local Ethernet broadcast domain.
  3. A packet capture shows SYN, SYN-ACK, and ACK before payload exchange.
  4. A host must learn which on-link IPv6 router can forward packets to destinations outside its subnet.

Explanation

Correct Answer

B:

The all-ones Ethernet destination address denotes a broadcast received throughout the local VLAN. This meets the stated need for ethernet broadcast destination.

Incorrect Answers

A:

The ipv4 /26 network boundary scenario has a different requirement: A /26 advances in blocks of 64 in the last octet, so .143 lies inside the .128 through .191 subnet. It does not directly meet the ethernet broadcast destination need in this question.

C:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the ethernet broadcast destination need in this question.

D:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the ethernet broadcast destination need in this question.

Question 137

A branch router has no more specific route for a public destination but has an upstream Internet gateway. Which configuration or troubleshooting action most directly meets the need?

  1. Use an active 0.0.0.0/0 default route toward the upstream gateway.
  2. Plan for 254 ordinary usable IPv4 host addresses in that /24 subnet.
  3. Send ICMP echo requests using ping and inspect the echo responses.
  4. Configure a VLAN-tagged 802.1Q trunk with the intended VLAN membership on both ends.

Explanation

Correct Answer

A:

The IPv4 default route matches any destination without a more-specific active prefix. This meets the stated need for ipv4 default route.

Incorrect Answers

B:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 default route need in this question.

C:

The icmp echo reachability scenario has a different requirement: Ping normally tests reachability by sending ICMP echo requests and observing returned echo replies. It does not directly meet the ipv4 default route need in this question.

D:

The ieee 802.1q trunking scenario has a different requirement: 802.1Q VLAN tags identify the logical Layer 2 segment carried over a shared physical link. It does not directly meet the ipv4 default route need in this question.

Question 138

Within Networking Fundamentals, a Junos engineer proposes the following response: Use an active 0.0.0.0/0 default route toward the upstream gateway. Which concept or operating procedure is best illustrated?

  1. IPv4 /24 usable hosts
  2. ICMP echo reachability
  3. IPv4 default route
  4. IEEE 802.1Q trunking

Explanation

Correct Answer

C:

The IPv4 default route matches any destination without a more-specific active prefix. This meets the stated need for ipv4 default route.

Incorrect Answers

A:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 default route need in this question.

B:

The icmp echo reachability scenario has a different requirement: Ping normally tests reachability by sending ICMP echo requests and observing returned echo replies. It does not directly meet the ipv4 default route need in this question.

D:

The ieee 802.1q trunking scenario has a different requirement: 802.1Q VLAN tags identify the logical Layer 2 segment carried over a shared physical link. It does not directly meet the ipv4 default route need in this question.

Question 139

A branch router has no more specific route for a public destination but has an upstream Internet gateway. The proposed response is: Use an active 0.0.0.0/0 default route toward the upstream gateway. Which explanation most accurately supports this response?

  1. The IPv4 default route matches any destination without a more-specific active prefix.
  2. A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved.
  3. Ping normally tests reachability by sending ICMP echo requests and observing returned echo replies.
  4. 802.1Q VLAN tags identify the logical Layer 2 segment carried over a shared physical link.

Explanation

Correct Answer

A:

The IPv4 default route matches any destination without a more-specific active prefix. This meets the stated need for ipv4 default route.

Incorrect Answers

B:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 default route need in this question.

C:

The icmp echo reachability scenario has a different requirement: Ping normally tests reachability by sending ICMP echo requests and observing returned echo replies. It does not directly meet the ipv4 default route need in this question.

D:

The ieee 802.1q trunking scenario has a different requirement: 802.1Q VLAN tags identify the logical Layer 2 segment carried over a shared physical link. It does not directly meet the ipv4 default route need in this question.

Question 140

Within Networking Fundamentals, a technician selects this approach: Use an active 0.0.0.0/0 default route toward the upstream gateway. Which original requirement or fault would most directly justify it?

  1. An IPv4 LAN uses a conventional /24 mask and reserves network and broadcast addresses.
  2. A branch router has no more specific route for a public destination but has an upstream Internet gateway.
  3. A technician wants a quick IP-level reachability test that measures round-trip replies.
  4. A single Ethernet uplink must carry user traffic belonging to three separate VLANs.

Explanation

Correct Answer

B:

The IPv4 default route matches any destination without a more-specific active prefix. This meets the stated need for ipv4 default route.

Incorrect Answers

A:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 default route need in this question.

C:

The icmp echo reachability scenario has a different requirement: Ping normally tests reachability by sending ICMP echo requests and observing returned echo replies. It does not directly meet the ipv4 default route need in this question.

D:

The ieee 802.1q trunking scenario has a different requirement: 802.1Q VLAN tags identify the logical Layer 2 segment carried over a shared physical link. It does not directly meet the ipv4 default route need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests