McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 13

Question 120

Within Networking Fundamentals, a technician selects this approach: Configure appropriate source NAT on the border device with required return-flow state. Which original requirement or fault would most directly justify it?

  1. Internal 10.10.0.0/16 hosts must reach the public Internet through one edge address.
  2. A host knows the on-link IPv4 address of a peer but has no Ethernet destination MAC address.
  3. An application needs reliable ordered delivery over an established byte-stream connection.
  4. An IPv4 LAN uses a conventional /24 mask and reserves network and broadcast addresses.

Explanation

Correct Answer

A:

Source NAT can translate private source addresses to an outward-facing address for Internet access. This meets the stated need for nat boundary translation.

Incorrect Answers

B:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the nat boundary translation need in this question.

C:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the nat boundary translation need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the nat boundary translation need in this question.

Question 121

A host has stale information after a server's Ethernet adapter is replaced, but the IPv4 address stays the same. Which configuration or troubleshooting action most directly meets the need?

  1. Choose the /25 route for that destination when both routes are active.
  2. Convert decimal 13 to 00001101 in eight-bit binary notation.
  3. Classify the sequence as TCP's three-way connection handshake.
  4. Refresh the ARP neighbor entry so the new MAC address can be learned.

Explanation

Correct Answer

D:

A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. This meets the stated need for arp cache update.

Incorrect Answers

A:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the arp cache update need in this question.

B:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the arp cache update need in this question.

C:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the arp cache update need in this question.

Question 122

Within Networking Fundamentals, a Junos engineer proposes the following response: Refresh the ARP neighbor entry so the new MAC address can be learned. Which concept or operating procedure is best illustrated?

  1. Longest-prefix matching
  2. Decimal to binary conversion
  3. TCP three-way handshake
  4. ARP cache update

Explanation

Correct Answer

D:

A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. This meets the stated need for arp cache update.

Incorrect Answers

A:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the arp cache update need in this question.

B:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the arp cache update need in this question.

C:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the arp cache update need in this question.

Question 123

A host has stale information after a server's Ethernet adapter is replaced, but the IPv4 address stays the same. The proposed response is: Refresh the ARP neighbor entry so the new MAC address can be learned. Which explanation most accurately supports this response?

  1. IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence.
  2. A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated.
  3. Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set.
  4. The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established.

Explanation

Correct Answer

B:

A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. This meets the stated need for arp cache update.

Incorrect Answers

A:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the arp cache update need in this question.

C:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the arp cache update need in this question.

D:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the arp cache update need in this question.

Question 124

Within Networking Fundamentals, a technician selects this approach: Refresh the ARP neighbor entry so the new MAC address can be learned. Which original requirement or fault would most directly justify it?

  1. A host has stale information after a server's Ethernet adapter is replaced, but the IPv4 address stays the same.
  2. A router learns 203.0.113.0/24 and the more-specific 203.0.113.128/25, then forwards to 203.0.113.140.
  3. An addressing exercise asks for the eight-bit unsigned binary representation of decimal 13.
  4. A packet capture shows SYN, SYN-ACK, and ACK before payload exchange.

Explanation

Correct Answer

A:

A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. This meets the stated need for arp cache update.

Incorrect Answers

B:

The longest-prefix matching scenario has a different requirement: IP forwarding chooses the longest matching destination prefix, independent of the broader route's presence. It does not directly meet the arp cache update need in this question.

C:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the arp cache update need in this question.

D:

The tcp three-way handshake scenario has a different requirement: The SYN, SYN-ACK, and ACK exchange synchronizes sequence numbers when a TCP connection is established. It does not directly meet the arp cache update need in this question.

Question 125

An addressing exercise asks for the eight-bit unsigned binary representation of decimal 13. Which configuration or troubleshooting action most directly meets the need?

  1. Convert decimal 13 to 00001101 in eight-bit binary notation.
  2. Learn the default router from IPv6 Router Advertisements rather than using ARP.
  3. Configure appropriate source NAT on the border device with required return-flow state.
  4. Refresh the ARP neighbor entry so the new MAC address can be learned.

Explanation

Correct Answer

A:

Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. This meets the stated need for decimal to binary conversion.

Incorrect Answers

B:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the decimal to binary conversion need in this question.

C:

The nat boundary translation scenario has a different requirement: Source NAT can translate private source addresses to an outward-facing address for Internet access. It does not directly meet the decimal to binary conversion need in this question.

D:

The arp cache update scenario has a different requirement: A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. It does not directly meet the decimal to binary conversion need in this question.

Question 126

Within Networking Fundamentals, a Junos engineer proposes the following response: Convert decimal 13 to 00001101 in eight-bit binary notation. Which concept or operating procedure is best illustrated?

  1. IPv6 default-router discovery
  2. NAT boundary translation
  3. Decimal to binary conversion
  4. ARP cache update

Explanation

Correct Answer

C:

Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. This meets the stated need for decimal to binary conversion.

Incorrect Answers

A:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the decimal to binary conversion need in this question.

B:

The nat boundary translation scenario has a different requirement: Source NAT can translate private source addresses to an outward-facing address for Internet access. It does not directly meet the decimal to binary conversion need in this question.

D:

The arp cache update scenario has a different requirement: A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. It does not directly meet the decimal to binary conversion need in this question.

Question 127

An addressing exercise asks for the eight-bit unsigned binary representation of decimal 13. The proposed response is: Convert decimal 13 to 00001101 in eight-bit binary notation. Which explanation most accurately supports this response?

  1. Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set.
  2. IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding.
  3. Source NAT can translate private source addresses to an outward-facing address for Internet access.
  4. A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated.

Explanation

Correct Answer

A:

Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. This meets the stated need for decimal to binary conversion.

Incorrect Answers

B:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the decimal to binary conversion need in this question.

C:

The nat boundary translation scenario has a different requirement: Source NAT can translate private source addresses to an outward-facing address for Internet access. It does not directly meet the decimal to binary conversion need in this question.

D:

The arp cache update scenario has a different requirement: A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. It does not directly meet the decimal to binary conversion need in this question.

Question 128

Within Networking Fundamentals, a technician selects this approach: Convert decimal 13 to 00001101 in eight-bit binary notation. Which original requirement or fault would most directly justify it?

  1. A host must learn which on-link IPv6 router can forward packets to destinations outside its subnet.
  2. An addressing exercise asks for the eight-bit unsigned binary representation of decimal 13.
  3. Internal 10.10.0.0/16 hosts must reach the public Internet through one edge address.
  4. A host has stale information after a server's Ethernet adapter is replaced, but the IPv4 address stays the same.

Explanation

Correct Answer

B:

Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. This meets the stated need for decimal to binary conversion.

Incorrect Answers

A:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the decimal to binary conversion need in this question.

C:

The nat boundary translation scenario has a different requirement: Source NAT can translate private source addresses to an outward-facing address for Internet access. It does not directly meet the decimal to binary conversion need in this question.

D:

The arp cache update scenario has a different requirement: A stale IPv4-to-MAC neighbor mapping can misdirect local Ethernet delivery until the entry is updated. It does not directly meet the decimal to binary conversion need in this question.

Question 129

A network technician must convert the binary octet 11000000 to decimal. Which configuration or troubleshooting action most directly meets the need?

  1. Interpret 11000000 as decimal 192.
  2. Configure its switchport as an access port in the finance VLAN.
  3. Allocate an IPv4 /27 subnet for the 30-host segment.
  4. Assign a /30 subnet with the two middle IPv4 addresses to the routers.

Explanation

Correct Answer

A:

The two high bits have values 128 and 64, yielding 192 when both are set. This meets the stated need for binary to decimal conversion.

Incorrect Answers

B:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the binary to decimal conversion need in this question.

C:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the binary to decimal conversion need in this question.

D:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the binary to decimal conversion need in this question.

Question 130

Within Networking Fundamentals, a Junos engineer proposes the following response: Interpret 11000000 as decimal 192. Which concept or operating procedure is best illustrated?

  1. Access-port VLAN assignment
  2. IPv4 /27 usable hosts
  3. IPv4 /30 point-to-point
  4. Binary to decimal conversion

Explanation

Correct Answer

D:

The two high bits have values 128 and 64, yielding 192 when both are set. This meets the stated need for binary to decimal conversion.

Incorrect Answers

A:

The access-port vlan assignment scenario has a different requirement: An access port associates untagged endpoint traffic with one configured VLAN instead of requiring the host to add tags. It does not directly meet the binary to decimal conversion need in this question.

B:

The ipv4 /27 usable hosts scenario has a different requirement: A /27 has five host bits and 32 total addresses, of which 30 are ordinary usable hosts. It does not directly meet the binary to decimal conversion need in this question.

C:

The ipv4 /30 point-to-point scenario has a different requirement: A conventional /30 has four addresses, with network and broadcast reserved and two usable host addresses. It does not directly meet the binary to decimal conversion need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests