McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 12

Question 110

Within Networking Fundamentals, a Junos engineer proposes the following response: Validate the path MTU and account for fragmentation or packet-size adjustment where supported. Which concept or operating procedure is best illustrated?

  1. IPv4 packet MTU
  2. IPv4 broadcast address
  3. IPv6 default-router discovery
  4. IPv4 ARP resolution

Explanation

Correct Answer

A:

An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. This meets the stated need for ipv4 packet mtu.

Incorrect Answers

B:

The ipv4 broadcast address scenario has a different requirement: A /27 spans 32 addresses, so the .64 subnet ends with the all-host-bits-one address .95. It does not directly meet the ipv4 packet mtu need in this question.

C:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the ipv4 packet mtu need in this question.

D:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the ipv4 packet mtu need in this question.

Question 111

A large packet repeatedly fails across a link with an MTU smaller than its total size. The proposed response is: Validate the path MTU and account for fragmentation or packet-size adjustment where supported. Which explanation most accurately supports this response?

  1. A /27 spans 32 addresses, so the .64 subnet ends with the all-host-bits-one address .95.
  2. IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding.
  3. ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames.
  4. An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling.

Explanation

Correct Answer

D:

An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. This meets the stated need for ipv4 packet mtu.

Incorrect Answers

A:

The ipv4 broadcast address scenario has a different requirement: A /27 spans 32 addresses, so the .64 subnet ends with the all-host-bits-one address .95. It does not directly meet the ipv4 packet mtu need in this question.

B:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the ipv4 packet mtu need in this question.

C:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the ipv4 packet mtu need in this question.

Question 112

Within Networking Fundamentals, a technician selects this approach: Validate the path MTU and account for fragmentation or packet-size adjustment where supported. Which original requirement or fault would most directly justify it?

  1. A team must determine the directed broadcast address of the 192.0.2.64/27 subnet.
  2. A large packet repeatedly fails across a link with an MTU smaller than its total size.
  3. A host must learn which on-link IPv6 router can forward packets to destinations outside its subnet.
  4. A host knows the on-link IPv4 address of a peer but has no Ethernet destination MAC address.

Explanation

Correct Answer

B:

An MTU constrains the maximum packet carried by a link, so oversized packets require compatible handling. This meets the stated need for ipv4 packet mtu.

Incorrect Answers

A:

The ipv4 broadcast address scenario has a different requirement: A /27 spans 32 addresses, so the .64 subnet ends with the all-host-bits-one address .95. It does not directly meet the ipv4 packet mtu need in this question.

C:

The ipv6 default-router discovery scenario has a different requirement: IPv6 Router Advertisements carry default-router information that hosts can use for off-link forwarding. It does not directly meet the ipv4 packet mtu need in this question.

D:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the ipv4 packet mtu need in this question.

Question 113

An organization needs internal IPv4 addresses that are not globally allocated as public Internet destinations. Which configuration or troubleshooting action most directly meets the need?

  1. Select UDP and provide any required reliability in the application.
  2. Choose a private RFC1918 block such as 10.0.0.0/8 for internal hosts.
  3. Treat an IPv6 address as 128 bits rather than 32 bits.
  4. Plan for 254 ordinary usable IPv4 host addresses in that /24 subnet.

Explanation

Correct Answer

B:

RFC1918 defines private IPv4 spaces for internal addressing rather than ordinary public Internet routing. This meets the stated need for ipv4 rfc1918 addressing.

Incorrect Answers

A:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv4 rfc1918 addressing need in this question.

C:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 rfc1918 addressing need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 rfc1918 addressing need in this question.

Question 114

Within Networking Fundamentals, a Junos engineer proposes the following response: Choose a private RFC1918 block such as 10.0.0.0/8 for internal hosts. Which concept or operating procedure is best illustrated?

  1. UDP connectionless transport
  2. IPv4 RFC1918 addressing
  3. IPv6 address width
  4. IPv4 /24 usable hosts

Explanation

Correct Answer

B:

RFC1918 defines private IPv4 spaces for internal addressing rather than ordinary public Internet routing. This meets the stated need for ipv4 rfc1918 addressing.

Incorrect Answers

A:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv4 rfc1918 addressing need in this question.

C:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 rfc1918 addressing need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 rfc1918 addressing need in this question.

Question 115

An organization needs internal IPv4 addresses that are not globally allocated as public Internet destinations. The proposed response is: Choose a private RFC1918 block such as 10.0.0.0/8 for internal hosts. Which explanation most accurately supports this response?

  1. RFC1918 defines private IPv4 spaces for internal addressing rather than ordinary public Internet routing.
  2. UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees.
  3. IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses.
  4. A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved.

Explanation

Correct Answer

A:

RFC1918 defines private IPv4 spaces for internal addressing rather than ordinary public Internet routing. This meets the stated need for ipv4 rfc1918 addressing.

Incorrect Answers

B:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv4 rfc1918 addressing need in this question.

C:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 rfc1918 addressing need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 rfc1918 addressing need in this question.

Question 116

Within Networking Fundamentals, a technician selects this approach: Choose a private RFC1918 block such as 10.0.0.0/8 for internal hosts. Which original requirement or fault would most directly justify it?

  1. A real-time telemetry sender wants a lightweight datagram service without a built-in reliability handshake.
  2. An engineer must compare the address space of IPv6 with 32-bit IPv4 addresses.
  3. An IPv4 LAN uses a conventional /24 mask and reserves network and broadcast addresses.
  4. An organization needs internal IPv4 addresses that are not globally allocated as public Internet destinations.

Explanation

Correct Answer

D:

RFC1918 defines private IPv4 spaces for internal addressing rather than ordinary public Internet routing. This meets the stated need for ipv4 rfc1918 addressing.

Incorrect Answers

A:

The udp connectionless transport scenario has a different requirement: UDP sends connectionless datagrams without TCP-style connection establishment or in-order delivery guarantees. It does not directly meet the ipv4 rfc1918 addressing need in this question.

B:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the ipv4 rfc1918 addressing need in this question.

C:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the ipv4 rfc1918 addressing need in this question.

Question 117

Internal 10.10.0.0/16 hosts must reach the public Internet through one edge address. Which configuration or troubleshooting action most directly meets the need?

  1. Use ARP resolution to learn the peer's link-layer address before sending the Ethernet frame.
  2. Select TCP with its connection establishment and acknowledgment behavior.
  3. Configure appropriate source NAT on the border device with required return-flow state.
  4. Plan for 254 ordinary usable IPv4 host addresses in that /24 subnet.

Explanation

Correct Answer

C:

Source NAT can translate private source addresses to an outward-facing address for Internet access. This meets the stated need for nat boundary translation.

Incorrect Answers

A:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the nat boundary translation need in this question.

B:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the nat boundary translation need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the nat boundary translation need in this question.

Question 118

Within Networking Fundamentals, a Junos engineer proposes the following response: Configure appropriate source NAT on the border device with required return-flow state. Which concept or operating procedure is best illustrated?

  1. IPv4 ARP resolution
  2. NAT boundary translation
  3. TCP connection setup
  4. IPv4 /24 usable hosts

Explanation

Correct Answer

B:

Source NAT can translate private source addresses to an outward-facing address for Internet access. This meets the stated need for nat boundary translation.

Incorrect Answers

A:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the nat boundary translation need in this question.

C:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the nat boundary translation need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the nat boundary translation need in this question.

Question 119

Internal 10.10.0.0/16 hosts must reach the public Internet through one edge address. The proposed response is: Configure appropriate source NAT on the border device with required return-flow state. Which explanation most accurately supports this response?

  1. Source NAT can translate private source addresses to an outward-facing address for Internet access.
  2. ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames.
  3. TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission.
  4. A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved.

Explanation

Correct Answer

A:

Source NAT can translate private source addresses to an outward-facing address for Internet access. This meets the stated need for nat boundary translation.

Incorrect Answers

B:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the nat boundary translation need in this question.

C:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the nat boundary translation need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the nat boundary translation need in this question.

Question 120

Within Networking Fundamentals, a technician selects this approach: Configure appropriate source NAT on the border device with required return-flow state. Which original requirement or fault would most directly justify it?

  1. Internal 10.10.0.0/16 hosts must reach the public Internet through one edge address.
  2. A host knows the on-link IPv4 address of a peer but has no Ethernet destination MAC address.
  3. An application needs reliable ordered delivery over an established byte-stream connection.
  4. An IPv4 LAN uses a conventional /24 mask and reserves network and broadcast addresses.

Explanation

Correct Answer

A:

Source NAT can translate private source addresses to an outward-facing address for Internet access. This meets the stated need for nat boundary translation.

Incorrect Answers

B:

The ipv4 arp resolution scenario has a different requirement: ARP maps an IPv4 address on a local link to the MAC address used to deliver Ethernet frames. It does not directly meet the nat boundary translation need in this question.

C:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the nat boundary translation need in this question.

D:

The ipv4 /24 usable hosts scenario has a different requirement: A /24 leaves eight host bits, yielding 256 addresses; the all-zero network and all-one broadcast addresses are reserved. It does not directly meet the nat boundary translation need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests