McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 16

Question 150

Within Networking Fundamentals, a Junos engineer proposes the following response: Resolve the configured default gateway's MAC address and forward the frame to that gateway. Which concept or operating procedure is best illustrated?

  1. Off-subnet gateway forwarding
  2. Collision-domain isolation
  3. IPv6 address width
  4. Decimal to binary conversion

Explanation

Correct Answer

A:

For an off-link IP destination, the Ethernet next hop is the router while the IP destination remains remote. This meets the stated need for off-subnet gateway forwarding.

Incorrect Answers

B:

The collision-domain isolation scenario has a different requirement: A switch separates contention at each port, whereas a hub repeats traffic into one shared collision domain. It does not directly meet the off-subnet gateway forwarding need in this question.

C:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the off-subnet gateway forwarding need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the off-subnet gateway forwarding need in this question.

Question 151

A host at 192.0.2.10/24 sends to 198.51.100.20 outside its local prefix. The proposed response is: Resolve the configured default gateway's MAC address and forward the frame to that gateway. Which explanation most accurately supports this response?

  1. A switch separates contention at each port, whereas a hub repeats traffic into one shared collision domain.
  2. IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses.
  3. For an off-link IP destination, the Ethernet next hop is the router while the IP destination remains remote.
  4. Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set.

Explanation

Correct Answer

C:

For an off-link IP destination, the Ethernet next hop is the router while the IP destination remains remote. This meets the stated need for off-subnet gateway forwarding.

Incorrect Answers

A:

The collision-domain isolation scenario has a different requirement: A switch separates contention at each port, whereas a hub repeats traffic into one shared collision domain. It does not directly meet the off-subnet gateway forwarding need in this question.

B:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the off-subnet gateway forwarding need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the off-subnet gateway forwarding need in this question.

Question 152

Within Networking Fundamentals, a technician selects this approach: Resolve the configured default gateway's MAC address and forward the frame to that gateway. Which original requirement or fault would most directly justify it?

  1. A host at 192.0.2.10/24 sends to 198.51.100.20 outside its local prefix.
  2. A campus Ethernet link connects several hosts through an old shared repeater, and simultaneous transmissions cause collisions.
  3. An engineer must compare the address space of IPv6 with 32-bit IPv4 addresses.
  4. An addressing exercise asks for the eight-bit unsigned binary representation of decimal 13.

Explanation

Correct Answer

A:

For an off-link IP destination, the Ethernet next hop is the router while the IP destination remains remote. This meets the stated need for off-subnet gateway forwarding.

Incorrect Answers

B:

The collision-domain isolation scenario has a different requirement: A switch separates contention at each port, whereas a hub repeats traffic into one shared collision domain. It does not directly meet the off-subnet gateway forwarding need in this question.

C:

The ipv6 address width scenario has a different requirement: IPv6 uses 128-bit addresses represented as hexadecimal groups, much longer than 32-bit IPv4 addresses. It does not directly meet the off-subnet gateway forwarding need in this question.

D:

The decimal to binary conversion scenario has a different requirement: Thirteen equals eight plus four plus one, so the 8, 4, and 1 bit positions are set. It does not directly meet the off-subnet gateway forwarding need in this question.

Question 153

A company wants to aggregate 2001:db8:100:0::/64 and 2001:db8:100:1::/64 without covering additional /64 networks. Which configuration or troubleshooting action most directly meets the need?

  1. Run traceroute and inspect the responses triggered by successive hop-limit values.
  2. Select TCP with its connection establishment and acknowledgment behavior.
  3. Advertise their common aggregate 198.51.100.0/23 where policy permits.
  4. Use the parent aggregate 2001:db8:100::/63 when advertising those adjacent subnets.

Explanation

Correct Answer

D:

Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. This meets the stated need for ipv6 prefix summarization.

Incorrect Answers

A:

The traceroute ttl discovery scenario has a different requirement: Traceroute varies TTL or hop limit to elicit intermediate router responses and infer a packet path. It does not directly meet the ipv6 prefix summarization need in this question.

B:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ipv6 prefix summarization need in this question.

C:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the ipv6 prefix summarization need in this question.

Question 154

Within Networking Fundamentals, a Junos engineer proposes the following response: Use the parent aggregate 2001:db8:100::/63 when advertising those adjacent subnets. Which concept or operating procedure is best illustrated?

  1. IPv6 prefix summarization
  2. Traceroute TTL discovery
  3. TCP connection setup
  4. Contiguous route summarization

Explanation

Correct Answer

A:

Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. This meets the stated need for ipv6 prefix summarization.

Incorrect Answers

B:

The traceroute ttl discovery scenario has a different requirement: Traceroute varies TTL or hop limit to elicit intermediate router responses and infer a packet path. It does not directly meet the ipv6 prefix summarization need in this question.

C:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ipv6 prefix summarization need in this question.

D:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the ipv6 prefix summarization need in this question.

Question 155

A company wants to aggregate 2001:db8:100:0::/64 and 2001:db8:100:1::/64 without covering additional /64 networks. The proposed response is: Use the parent aggregate 2001:db8:100::/63 when advertising those adjacent subnets. Which explanation most accurately supports this response?

  1. Traceroute varies TTL or hop limit to elicit intermediate router responses and infer a packet path.
  2. Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary.
  3. TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission.
  4. The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks.

Explanation

Correct Answer

B:

Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. This meets the stated need for ipv6 prefix summarization.

Incorrect Answers

A:

The traceroute ttl discovery scenario has a different requirement: Traceroute varies TTL or hop limit to elicit intermediate router responses and infer a packet path. It does not directly meet the ipv6 prefix summarization need in this question.

C:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ipv6 prefix summarization need in this question.

D:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the ipv6 prefix summarization need in this question.

Question 156

Within Networking Fundamentals, a technician selects this approach: Use the parent aggregate 2001:db8:100::/63 when advertising those adjacent subnets. Which original requirement or fault would most directly justify it?

  1. A technician needs to reveal intermediate IP hops along a path to a remote server.
  2. An application needs reliable ordered delivery over an established byte-stream connection.
  3. Two adjacent IPv4 networks, 198.51.100.0/24 and 198.51.101.0/24, should be summarized without adding unrelated networks.
  4. A company wants to aggregate 2001:db8:100:0::/64 and 2001:db8:100:1::/64 without covering additional /64 networks.

Explanation

Correct Answer

D:

Those adjacent /64 networks share a 63-bit prefix and align on the correct /63 boundary. This meets the stated need for ipv6 prefix summarization.

Incorrect Answers

A:

The traceroute ttl discovery scenario has a different requirement: Traceroute varies TTL or hop limit to elicit intermediate router responses and infer a packet path. It does not directly meet the ipv6 prefix summarization need in this question.

B:

The tcp connection setup scenario has a different requirement: TCP is connection-oriented and provides ordered reliable delivery using sequence numbers, acknowledgments, and retransmission. It does not directly meet the ipv6 prefix summarization need in this question.

C:

The contiguous route summarization scenario has a different requirement: The two /24 blocks align on the same /23 boundary, so their common prefix exactly represents both networks. It does not directly meet the ipv6 prefix summarization need in this question.

Question 157

An administrator needs to identify which Junos component calculates routes and runs the control-plane protocols. Which configuration or troubleshooting action most directly meets the need?

  1. Use the forwarding table or FIB populated from selected routing entries.
  2. Locate routing protocol and management processing on the Routing Engine.
  3. Classify the echo request as locally originated control-plane traffic.
  4. Inspect the routing protocol daemon rpd on the Routing Engine.

Explanation

Correct Answer

B:

The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. This meets the stated need for routing engine control plane.

Incorrect Answers

A:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the routing engine control plane need in this question.

C:

The local-originated ping scenario has a different requirement: A packet generated by the router originates on its host/control plane rather than arriving as transit traffic. It does not directly meet the routing engine control plane need in this question.

D:

The routing protocol daemon rpd scenario has a different requirement: The rpd process participates in routing-protocol operation and route selection within Junos's control plane. It does not directly meet the routing engine control plane need in this question.

Question 158

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Locate routing protocol and management processing on the Routing Engine. Which concept or operating procedure is best illustrated?

  1. Routing Engine control plane
  2. Forwarding Information Base
  3. Local-originated ping
  4. Routing protocol daemon rpd

Explanation

Correct Answer

A:

The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. This meets the stated need for routing engine control plane.

Incorrect Answers

B:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the routing engine control plane need in this question.

C:

The local-originated ping scenario has a different requirement: A packet generated by the router originates on its host/control plane rather than arriving as transit traffic. It does not directly meet the routing engine control plane need in this question.

D:

The routing protocol daemon rpd scenario has a different requirement: The rpd process participates in routing-protocol operation and route selection within Junos's control plane. It does not directly meet the routing engine control plane need in this question.

Question 159

An administrator needs to identify which Junos component calculates routes and runs the control-plane protocols. The proposed response is: Locate routing protocol and management processing on the Routing Engine. Which explanation most accurately supports this response?

  1. A forwarding table contains information optimized for packet forwarding rather than every route candidate.
  2. A packet generated by the router originates on its host/control plane rather than arriving as transit traffic.
  3. The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge.
  4. The rpd process participates in routing-protocol operation and route selection within Junos's control plane.

Explanation

Correct Answer

C:

The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. This meets the stated need for routing engine control plane.

Incorrect Answers

A:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the routing engine control plane need in this question.

B:

The local-originated ping scenario has a different requirement: A packet generated by the router originates on its host/control plane rather than arriving as transit traffic. It does not directly meet the routing engine control plane need in this question.

D:

The routing protocol daemon rpd scenario has a different requirement: The rpd process participates in routing-protocol operation and route selection within Junos's control plane. It does not directly meet the routing engine control plane need in this question.

Question 160

Within Junos OS Fundamentals, a technician selects this approach: Locate routing protocol and management processing on the Routing Engine. Which original requirement or fault would most directly justify it?

  1. A packet needs an egress decision from the set of selected routes rather than all protocol candidates.
  2. A router itself creates an ICMP echo request to test an adjacent gateway.
  3. An engineer must investigate the process coordinating BGP and OSPF route calculation in Junos.
  4. An administrator needs to identify which Junos component calculates routes and runs the control-plane protocols.

Explanation

Correct Answer

D:

The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. This meets the stated need for routing engine control plane.

Incorrect Answers

A:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the routing engine control plane need in this question.

B:

The local-originated ping scenario has a different requirement: A packet generated by the router originates on its host/control plane rather than arriving as transit traffic. It does not directly meet the routing engine control plane need in this question.

C:

The routing protocol daemon rpd scenario has a different requirement: The rpd process participates in routing-protocol operation and route selection within Junos's control plane. It does not directly meet the routing engine control plane need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests