McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 106

Question 1050

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use then discard in the matching firewall filter term. Which concept or operating procedure is best illustrated?

  1. Protect Routing Engine lo0
  2. Policy next policy
  3. Firewall filter discard action
  4. Input versus output attachment

Explanation

Correct Answer

C:

Discard drops matched packets without explicitly returning an unreachable response. This meets the stated need for firewall filter discard action.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the firewall filter discard action need in this question.

B:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the firewall filter discard action need in this question.

D:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the firewall filter discard action need in this question.

Question 1051

A stateless ingress policy should silently drop a known unwanted traffic class. The proposed response is: Use then discard in the matching firewall filter term. Which explanation most accurately supports this response?

  1. A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges.
  2. Discard drops matched packets without explicitly returning an unreachable response.
  3. Next policy transfers evaluation to the next policy statement rather than finishing with a decision.
  4. The input direction applies filter logic to packets entering the associated interface.

Explanation

Correct Answer

B:

Discard drops matched packets without explicitly returning an unreachable response. This meets the stated need for firewall filter discard action.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the firewall filter discard action need in this question.

C:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the firewall filter discard action need in this question.

D:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the firewall filter discard action need in this question.

Question 1052

Within Routing Policy and Firewall Filters, a technician selects this approach: Use then discard in the matching firewall filter term. Which original requirement or fault would most directly justify it?

  1. A router's management and routing-protocol traffic should be restricted to approved control-plane sources.
  2. A stateless ingress policy should silently drop a known unwanted traffic class.
  3. A route should be evaluated by the next policy-statement in the configured policy list.
  4. A filter should inspect packets as they arrive at an IPv4 logical interface, before routing onward.

Explanation

Correct Answer

B:

Discard drops matched packets without explicitly returning an unreachable response. This meets the stated need for firewall filter discard action.

Incorrect Answers

A:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the firewall filter discard action need in this question.

C:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the firewall filter discard action need in this question.

D:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the firewall filter discard action need in this question.

Question 1053

An ingress filter should refuse certain traffic with a supported error response instead of a silent drop. Which configuration or troubleshooting action most directly meets the need?

  1. Set the appropriate BGP local-preference in a matching policy term.
  2. Use a from protocol tcp condition in the firewall filter term.
  3. Use then reject with the applicable supported behavior for the filter term.
  4. Apply a suitable BGP import policy that accepts approved prefixes and rejects the rest.

Explanation

Correct Answer

C:

Reject drops matching packets and can generate an error response, unlike silent discard. This meets the stated need for firewall filter reject action.

Incorrect Answers

A:

The policy local preference action scenario has a different requirement: BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. It does not directly meet the firewall filter reject action need in this question.

B:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall filter reject action need in this question.

D:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the firewall filter reject action need in this question.

Question 1054

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use then reject with the applicable supported behavior for the filter term. Which concept or operating procedure is best illustrated?

  1. Policy local preference action
  2. Firewall filter reject action
  3. Firewall protocol TCP match
  4. Import routing policy

Explanation

Correct Answer

B:

Reject drops matching packets and can generate an error response, unlike silent discard. This meets the stated need for firewall filter reject action.

Incorrect Answers

A:

The policy local preference action scenario has a different requirement: BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. It does not directly meet the firewall filter reject action need in this question.

C:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall filter reject action need in this question.

D:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the firewall filter reject action need in this question.

Question 1055

An ingress filter should refuse certain traffic with a supported error response instead of a silent drop. The proposed response is: Use then reject with the applicable supported behavior for the filter term. Which explanation most accurately supports this response?

  1. Reject drops matching packets and can generate an error response, unlike silent discard.
  2. BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter.
  3. The protocol condition matches the IP protocol field rather than an application's name.
  4. Import policy controls which received routes a protocol can install or retain for route selection.

Explanation

Correct Answer

A:

Reject drops matching packets and can generate an error response, unlike silent discard. This meets the stated need for firewall filter reject action.

Incorrect Answers

B:

The policy local preference action scenario has a different requirement: BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. It does not directly meet the firewall filter reject action need in this question.

C:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall filter reject action need in this question.

D:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the firewall filter reject action need in this question.

Question 1056

Within Routing Policy and Firewall Filters, a technician selects this approach: Use then reject with the applicable supported behavior for the filter term. Which original requirement or fault would most directly justify it?

  1. An incoming BGP route should receive a different local preference for internal path selection.
  2. An ingress filter should refuse certain traffic with a supported error response instead of a silent drop.
  3. A stateless filter should match TCP sessions while leaving UDP to other terms.
  4. A router receives BGP prefixes but should accept only approved destination networks into its route table.

Explanation

Correct Answer

B:

Reject drops matching packets and can generate an error response, unlike silent discard. This meets the stated need for firewall filter reject action.

Incorrect Answers

A:

The policy local preference action scenario has a different requirement: BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. It does not directly meet the firewall filter reject action need in this question.

C:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall filter reject action need in this question.

D:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the firewall filter reject action need in this question.

Question 1057

Traffic matching a trusted monitoring source should pass the interface's configured packet filter. Which configuration or troubleshooting action most directly meets the need?

  1. Use then accept in the matching firewall filter term.
  2. Use a then count action with a suitable counter name and a final packet decision.
  3. Use route-filter 198.51.100.0/24 orlonger.
  4. Use an interface firewall filter rather than a routing import/export policy.

Explanation

Correct Answer

A:

Accept permits the matching packet through that filter's evaluation. This meets the stated need for firewall filter accept action.

Incorrect Answers

B:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the firewall filter accept action need in this question.

C:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter accept action need in this question.

D:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the firewall filter accept action need in this question.

Question 1058

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use then accept in the matching firewall filter term. Which concept or operating procedure is best illustrated?

  1. Firewall filter count action
  2. Orlonger route-filter match
  3. Firewall filter accept action
  4. Firewall filter versus routing policy

Explanation

Correct Answer

C:

Accept permits the matching packet through that filter's evaluation. This meets the stated need for firewall filter accept action.

Incorrect Answers

A:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the firewall filter accept action need in this question.

B:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter accept action need in this question.

D:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the firewall filter accept action need in this question.

Question 1059

Traffic matching a trusted monitoring source should pass the interface's configured packet filter. The proposed response is: Use then accept in the matching firewall filter term. Which explanation most accurately supports this response?

  1. The count action increments a counter for matched packets and can be combined with forwarding disposition.
  2. The orlonger operator matches the named prefix and more-specific routes beneath it.
  3. Firewall filters evaluate packets while routing policies influence route learning or advertisement.
  4. Accept permits the matching packet through that filter's evaluation.

Explanation

Correct Answer

D:

Accept permits the matching packet through that filter's evaluation. This meets the stated need for firewall filter accept action.

Incorrect Answers

A:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the firewall filter accept action need in this question.

B:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter accept action need in this question.

C:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the firewall filter accept action need in this question.

Question 1060

Within Routing Policy and Firewall Filters, a technician selects this approach: Use then accept in the matching firewall filter term. Which original requirement or fault would most directly justify it?

  1. Operators need a running counter for traffic matching one specific firewall filter term.
  2. A routing policy should match 198.51.100.0/24 and any of its more-specific routes.
  3. A network engineer wants to block unwanted TCP packets arriving at an interface, not reject learned prefixes.
  4. Traffic matching a trusted monitoring source should pass the interface's configured packet filter.

Explanation

Correct Answer

D:

Accept permits the matching packet through that filter's evaluation. This meets the stated need for firewall filter accept action.

Incorrect Answers

A:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the firewall filter accept action need in this question.

B:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter accept action need in this question.

C:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the firewall filter accept action need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests