McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 107

Question 1060

Within Routing Policy and Firewall Filters, a technician selects this approach: Use then accept in the matching firewall filter term. Which original requirement or fault would most directly justify it?

  1. Operators need a running counter for traffic matching one specific firewall filter term.
  2. A routing policy should match 198.51.100.0/24 and any of its more-specific routes.
  3. A network engineer wants to block unwanted TCP packets arriving at an interface, not reject learned prefixes.
  4. Traffic matching a trusted monitoring source should pass the interface's configured packet filter.

Explanation

Correct Answer

D:

Accept permits the matching packet through that filter's evaluation. This meets the stated need for firewall filter accept action.

Incorrect Answers

A:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the firewall filter accept action need in this question.

B:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter accept action need in this question.

C:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the firewall filter accept action need in this question.

Question 1061

A firewall filter has only a permit term for a management subnet and no explicit final term. Which configuration or troubleshooting action most directly meets the need?

  1. Create ordered terms under firewall family inet filter with from and then statements.
  2. Use a from protocol tcp condition in the firewall filter term.
  3. Expect other unmatched packets to be discarded by the default firewall filter action.
  4. Use a supported then preference value action for the intended matching term.

Explanation

Correct Answer

C:

Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. This meets the stated need for implicit final filter discard.

Incorrect Answers

A:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the implicit final filter discard need in this question.

B:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the implicit final filter discard need in this question.

D:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the implicit final filter discard need in this question.

Question 1062

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Expect other unmatched packets to be discarded by the default firewall filter action. Which concept or operating procedure is best illustrated?

  1. Implicit final filter discard
  2. Firewall filter term structure
  3. Firewall protocol TCP match
  4. Policy route preference action

Explanation

Correct Answer

A:

Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. This meets the stated need for implicit final filter discard.

Incorrect Answers

B:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the implicit final filter discard need in this question.

C:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the implicit final filter discard need in this question.

D:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the implicit final filter discard need in this question.

Question 1063

A firewall filter has only a permit term for a management subnet and no explicit final term. The proposed response is: Expect other unmatched packets to be discarded by the default firewall filter action. Which explanation most accurately supports this response?

  1. Junos firewall filters organize packet match conditions and actions into ordered terms.
  2. The protocol condition matches the IP protocol field rather than an application's name.
  3. Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match.
  4. Policy actions can modify preference attributes used later by route-selection logic.

Explanation

Correct Answer

C:

Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. This meets the stated need for implicit final filter discard.

Incorrect Answers

A:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the implicit final filter discard need in this question.

B:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the implicit final filter discard need in this question.

D:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the implicit final filter discard need in this question.

Question 1064

Within Routing Policy and Firewall Filters, a technician selects this approach: Expect other unmatched packets to be discarded by the default firewall filter action. Which original requirement or fault would most directly justify it?

  1. A stateless IPv4 packet filter needs several named match-and-action rules.
  2. A stateless filter should match TCP sessions while leaving UDP to other terms.
  3. A firewall filter has only a permit term for a management subnet and no explicit final term.
  4. An import policy should alter the selection preference for a subset of received routes.

Explanation

Correct Answer

C:

Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. This meets the stated need for implicit final filter discard.

Incorrect Answers

A:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the implicit final filter discard need in this question.

B:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the implicit final filter discard need in this question.

D:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the implicit final filter discard need in this question.

Question 1065

A filter should inspect packets as they arrive at an IPv4 logical interface, before routing onward. Which configuration or troubleshooting action most directly meets the need?

  1. Treat the filter as stateless unless a separate stateful feature is configured.
  2. Attach the firewall filter as an input filter to the intended family inet interface.
  3. Create a filter term matching protocol icmp, with the supported ICMP type condition if needed.
  4. Define a prefix-list and reference it from appropriate from prefix-list terms.

Explanation

Correct Answer

B:

The input direction applies filter logic to packets entering the associated interface. This meets the stated need for input versus output attachment.

Incorrect Answers

A:

The stateless packet filtering scenario has a different requirement: Ordinary Junos firewall filters evaluate packet fields and do not themselves track full bidirectional connection state. It does not directly meet the input versus output attachment need in this question.

C:

The firewall icmp match scenario has a different requirement: IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. It does not directly meet the input versus output attachment need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the input versus output attachment need in this question.

Question 1066

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Attach the firewall filter as an input filter to the intended family inet interface. Which concept or operating procedure is best illustrated?

  1. Stateless packet filtering
  2. Firewall ICMP match
  3. Prefix-list policy match
  4. Input versus output attachment

Explanation

Correct Answer

D:

The input direction applies filter logic to packets entering the associated interface. This meets the stated need for input versus output attachment.

Incorrect Answers

A:

The stateless packet filtering scenario has a different requirement: Ordinary Junos firewall filters evaluate packet fields and do not themselves track full bidirectional connection state. It does not directly meet the input versus output attachment need in this question.

B:

The firewall icmp match scenario has a different requirement: IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. It does not directly meet the input versus output attachment need in this question.

C:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the input versus output attachment need in this question.

Question 1067

A filter should inspect packets as they arrive at an IPv4 logical interface, before routing onward. The proposed response is: Attach the firewall filter as an input filter to the intended family inet interface. Which explanation most accurately supports this response?

  1. Ordinary Junos firewall filters evaluate packet fields and do not themselves track full bidirectional connection state.
  2. IP protocol and ICMP-type conditions can identify selected diagnostic packet classes.
  3. The input direction applies filter logic to packets entering the associated interface.
  4. A prefix list groups prefixes so route-matching policies can share a maintained set of network entries.

Explanation

Correct Answer

C:

The input direction applies filter logic to packets entering the associated interface. This meets the stated need for input versus output attachment.

Incorrect Answers

A:

The stateless packet filtering scenario has a different requirement: Ordinary Junos firewall filters evaluate packet fields and do not themselves track full bidirectional connection state. It does not directly meet the input versus output attachment need in this question.

B:

The firewall icmp match scenario has a different requirement: IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. It does not directly meet the input versus output attachment need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the input versus output attachment need in this question.

Question 1068

Within Routing Policy and Firewall Filters, a technician selects this approach: Attach the firewall filter as an input filter to the intended family inet interface. Which original requirement or fault would most directly justify it?

  1. A filter should inspect packets as they arrive at an IPv4 logical interface, before routing onward.
  2. A Junos firewall filter needs to match a packet, but the operator expects it to remember a full application connection.
  3. An operations team wants to count incoming IPv4 ICMP echo traffic separately from TCP.
  4. Several approved customer prefixes should be reused by more than one routing policy.

Explanation

Correct Answer

A:

The input direction applies filter logic to packets entering the associated interface. This meets the stated need for input versus output attachment.

Incorrect Answers

B:

The stateless packet filtering scenario has a different requirement: Ordinary Junos firewall filters evaluate packet fields and do not themselves track full bidirectional connection state. It does not directly meet the input versus output attachment need in this question.

C:

The firewall icmp match scenario has a different requirement: IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. It does not directly meet the input versus output attachment need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the input versus output attachment need in this question.

Question 1069

A traffic policy should classify or restrict packets as they leave the interface toward a downstream network. Which configuration or troubleshooting action most directly meets the need?

  1. Use a policy from protocol static match condition for the static-route term.
  2. Use supported strict unicast reverse-path forwarding verification.
  3. Match source-address 192.0.2.0/24 within the relevant firewall filter term.
  4. Apply the intended firewall filter in the interface's output direction.

Explanation

Correct Answer

D:

An output filter evaluates eligible packets on egress rather than at ingress. This meets the stated need for egress firewall filter.

Incorrect Answers

A:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the egress firewall filter need in this question.

B:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the egress firewall filter need in this question.

C:

The firewall source-address match scenario has a different requirement: A source-address condition evaluates the source IP field of matching packets. It does not directly meet the egress firewall filter need in this question.

Question 1070

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Apply the intended firewall filter in the interface's output direction. Which concept or operating procedure is best illustrated?

  1. Policy match protocol
  2. Unicast RPF strict mode
  3. Firewall source-address match
  4. Egress firewall filter

Explanation

Correct Answer

D:

An output filter evaluates eligible packets on egress rather than at ingress. This meets the stated need for egress firewall filter.

Incorrect Answers

A:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the egress firewall filter need in this question.

B:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the egress firewall filter need in this question.

C:

The firewall source-address match scenario has a different requirement: A source-address condition evaluates the source IP field of matching packets. It does not directly meet the egress firewall filter need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests