McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 104

Question 1030

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use a from protocol tcp condition in the firewall filter term. Which concept or operating procedure is best illustrated?

  1. Firewall protocol TCP match
  2. Default routing-policy behavior
  3. Firewall filter term structure
  4. Route policy versus packet filter impact

Explanation

Correct Answer

A:

The protocol condition matches the IP protocol field rather than an application's name. This meets the stated need for firewall protocol tcp match.

Incorrect Answers

B:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the firewall protocol tcp match need in this question.

C:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the firewall protocol tcp match need in this question.

D:

The route policy versus packet filter impact scenario has a different requirement: An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. It does not directly meet the firewall protocol tcp match need in this question.

Question 1031

A stateless filter should match TCP sessions while leaving UDP to other terms. The proposed response is: Use a from protocol tcp condition in the firewall filter term. Which explanation most accurately supports this response?

  1. The protocol condition matches the IP protocol field rather than an application's name.
  2. Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement.
  3. Junos firewall filters organize packet match conditions and actions into ordered terms.
  4. An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements.

Explanation

Correct Answer

A:

The protocol condition matches the IP protocol field rather than an application's name. This meets the stated need for firewall protocol tcp match.

Incorrect Answers

B:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the firewall protocol tcp match need in this question.

C:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the firewall protocol tcp match need in this question.

D:

The route policy versus packet filter impact scenario has a different requirement: An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. It does not directly meet the firewall protocol tcp match need in this question.

Question 1032

Within Routing Policy and Firewall Filters, a technician selects this approach: Use a from protocol tcp condition in the firewall filter term. Which original requirement or fault would most directly justify it?

  1. A routing protocol exchanges fewer routes than expected even though no custom policy is configured.
  2. A stateless IPv4 packet filter needs several named match-and-action rules.
  3. A stateless filter should match TCP sessions while leaving UDP to other terms.
  4. A network architect wants to prevent a BGP peer from learning a private prefix while keeping local packet processing unchanged.

Explanation

Correct Answer

C:

The protocol condition matches the IP protocol field rather than an application's name. This meets the stated need for firewall protocol tcp match.

Incorrect Answers

A:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the firewall protocol tcp match need in this question.

B:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the firewall protocol tcp match need in this question.

D:

The route policy versus packet filter impact scenario has a different requirement: An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. It does not directly meet the firewall protocol tcp match need in this question.

Question 1033

An interface filter should identify TCP traffic intended for the SSH service on port 22. Which configuration or troubleshooting action most directly meets the need?

  1. Define a prefix-list and reference it from appropriate from prefix-list terms.
  2. Combine protocol tcp with destination-port 22 in the relevant filter term.
  3. Use route-filter 198.51.100.0/24 orlonger.
  4. Use a from protocol tcp condition in the firewall filter term.

Explanation

Correct Answer

B:

A destination-port match identifies the transport service being requested by the packet. This meets the stated need for firewall destination-port match.

Incorrect Answers

A:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the firewall destination-port match need in this question.

C:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall destination-port match need in this question.

D:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall destination-port match need in this question.

Question 1034

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Combine protocol tcp with destination-port 22 in the relevant filter term. Which concept or operating procedure is best illustrated?

  1. Prefix-list policy match
  2. Orlonger route-filter match
  3. Firewall protocol TCP match
  4. Firewall destination-port match

Explanation

Correct Answer

D:

A destination-port match identifies the transport service being requested by the packet. This meets the stated need for firewall destination-port match.

Incorrect Answers

A:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the firewall destination-port match need in this question.

B:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall destination-port match need in this question.

C:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall destination-port match need in this question.

Question 1035

An interface filter should identify TCP traffic intended for the SSH service on port 22. The proposed response is: Combine protocol tcp with destination-port 22 in the relevant filter term. Which explanation most accurately supports this response?

  1. A prefix list groups prefixes so route-matching policies can share a maintained set of network entries.
  2. A destination-port match identifies the transport service being requested by the packet.
  3. The orlonger operator matches the named prefix and more-specific routes beneath it.
  4. The protocol condition matches the IP protocol field rather than an application's name.

Explanation

Correct Answer

B:

A destination-port match identifies the transport service being requested by the packet. This meets the stated need for firewall destination-port match.

Incorrect Answers

A:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the firewall destination-port match need in this question.

C:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall destination-port match need in this question.

D:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall destination-port match need in this question.

Question 1036

Within Routing Policy and Firewall Filters, a technician selects this approach: Combine protocol tcp with destination-port 22 in the relevant filter term. Which original requirement or fault would most directly justify it?

  1. Several approved customer prefixes should be reused by more than one routing policy.
  2. An interface filter should identify TCP traffic intended for the SSH service on port 22.
  3. A routing policy should match 198.51.100.0/24 and any of its more-specific routes.
  4. A stateless filter should match TCP sessions while leaving UDP to other terms.

Explanation

Correct Answer

B:

A destination-port match identifies the transport service being requested by the packet. This meets the stated need for firewall destination-port match.

Incorrect Answers

A:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the firewall destination-port match need in this question.

C:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall destination-port match need in this question.

D:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the firewall destination-port match need in this question.

Question 1037

An operations team wants to count incoming IPv4 ICMP echo traffic separately from TCP. Which configuration or troubleshooting action most directly meets the need?

  1. Create a filter term matching protocol icmp, with the supported ICMP type condition if needed.
  2. Expect other unmatched packets to be discarded by the default firewall filter action.
  3. Attach the firewall filter as an input filter to the intended family inet interface.
  4. Match the configured BGP community in an appropriate policy term.

Explanation

Correct Answer

A:

IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. This meets the stated need for firewall icmp match.

Incorrect Answers

B:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the firewall icmp match need in this question.

C:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the firewall icmp match need in this question.

D:

The bgp community match scenario has a different requirement: BGP communities provide route attributes that policies can examine or modify for routing decisions. It does not directly meet the firewall icmp match need in this question.

Question 1038

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Create a filter term matching protocol icmp, with the supported ICMP type condition if needed. Which concept or operating procedure is best illustrated?

  1. Implicit final filter discard
  2. Firewall ICMP match
  3. Input versus output attachment
  4. BGP community match

Explanation

Correct Answer

B:

IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. This meets the stated need for firewall icmp match.

Incorrect Answers

A:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the firewall icmp match need in this question.

C:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the firewall icmp match need in this question.

D:

The bgp community match scenario has a different requirement: BGP communities provide route attributes that policies can examine or modify for routing decisions. It does not directly meet the firewall icmp match need in this question.

Question 1039

An operations team wants to count incoming IPv4 ICMP echo traffic separately from TCP. The proposed response is: Create a filter term matching protocol icmp, with the supported ICMP type condition if needed. Which explanation most accurately supports this response?

  1. IP protocol and ICMP-type conditions can identify selected diagnostic packet classes.
  2. Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match.
  3. The input direction applies filter logic to packets entering the associated interface.
  4. BGP communities provide route attributes that policies can examine or modify for routing decisions.

Explanation

Correct Answer

A:

IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. This meets the stated need for firewall icmp match.

Incorrect Answers

B:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the firewall icmp match need in this question.

C:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the firewall icmp match need in this question.

D:

The bgp community match scenario has a different requirement: BGP communities provide route attributes that policies can examine or modify for routing decisions. It does not directly meet the firewall icmp match need in this question.

Question 1040

Within Routing Policy and Firewall Filters, a technician selects this approach: Create a filter term matching protocol icmp, with the supported ICMP type condition if needed. Which original requirement or fault would most directly justify it?

  1. A firewall filter has only a permit term for a management subnet and no explicit final term.
  2. A filter should inspect packets as they arrive at an IPv4 logical interface, before routing onward.
  3. An operations team wants to count incoming IPv4 ICMP echo traffic separately from TCP.
  4. One upstream peer marks selected routes with a known BGP community and routing policy must distinguish them.

Explanation

Correct Answer

C:

IP protocol and ICMP-type conditions can identify selected diagnostic packet classes. This meets the stated need for firewall icmp match.

Incorrect Answers

A:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the firewall icmp match need in this question.

B:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the firewall icmp match need in this question.

D:

The bgp community match scenario has a different requirement: BGP communities provide route attributes that policies can examine or modify for routing decisions. It does not directly meet the firewall icmp match need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests