McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 103

Question 1020

Within Routing Policy and Firewall Filters, a technician selects this approach: Create ordered terms under firewall family inet filter with from and then statements. Which original requirement or fault would most directly justify it?

  1. A routing policy should match 198.51.100.0/24 and any of its more-specific routes.
  2. A stateless IPv4 packet filter needs several named match-and-action rules.
  3. A multihomed edge sees asymmetric paths but should still drop packets with wholly unroutable source addresses.
  4. An ingress interface should reject packets whose source would not be reached through that same best return interface.

Explanation

Correct Answer

B:

Junos firewall filters organize packet match conditions and actions into ordered terms. This meets the stated need for firewall filter term structure.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter term structure need in this question.

C:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the firewall filter term structure need in this question.

D:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the firewall filter term structure need in this question.

Question 1021

An ingress IPv4 filter should act only on packets from 192.0.2.0/24. Which configuration or troubleshooting action most directly meets the need?

  1. Use route-filter 203.0.113.0/24 longer.
  2. Match source-address 192.0.2.0/24 within the relevant firewall filter term.
  3. Apply a supported policer action to matching firewall filter traffic.
  4. Apply an export policy that permits only the intended aggregate to be advertised.

Explanation

Correct Answer

B:

A source-address condition evaluates the source IP field of matching packets. This meets the stated need for firewall source-address match.

Incorrect Answers

A:

The longer-only route-filter match scenario has a different requirement: The longer operator excludes the stated base prefix while matching routes with additional prefix bits. It does not directly meet the firewall source-address match need in this question.

C:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the firewall source-address match need in this question.

D:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall source-address match need in this question.

Question 1022

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Match source-address 192.0.2.0/24 within the relevant firewall filter term. Which concept or operating procedure is best illustrated?

  1. Longer-only route-filter match
  2. Firewall policer rate limit
  3. Firewall source-address match
  4. Export routing policy

Explanation

Correct Answer

C:

A source-address condition evaluates the source IP field of matching packets. This meets the stated need for firewall source-address match.

Incorrect Answers

A:

The longer-only route-filter match scenario has a different requirement: The longer operator excludes the stated base prefix while matching routes with additional prefix bits. It does not directly meet the firewall source-address match need in this question.

B:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the firewall source-address match need in this question.

D:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall source-address match need in this question.

Question 1023

An ingress IPv4 filter should act only on packets from 192.0.2.0/24. The proposed response is: Match source-address 192.0.2.0/24 within the relevant firewall filter term. Which explanation most accurately supports this response?

  1. The longer operator excludes the stated base prefix while matching routes with additional prefix bits.
  2. A policer enforces rate or burst constraints for a class of packets according to its configured behavior.
  3. A source-address condition evaluates the source IP field of matching packets.
  4. Export policy controls which locally eligible routes a protocol sends to its neighbors.

Explanation

Correct Answer

C:

A source-address condition evaluates the source IP field of matching packets. This meets the stated need for firewall source-address match.

Incorrect Answers

A:

The longer-only route-filter match scenario has a different requirement: The longer operator excludes the stated base prefix while matching routes with additional prefix bits. It does not directly meet the firewall source-address match need in this question.

B:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the firewall source-address match need in this question.

D:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall source-address match need in this question.

Question 1024

Within Routing Policy and Firewall Filters, a technician selects this approach: Match source-address 192.0.2.0/24 within the relevant firewall filter term. Which original requirement or fault would most directly justify it?

  1. A policy must match only more-specifics of 203.0.113.0/24, not the /24 itself.
  2. An ingress IPv4 filter should act only on packets from 192.0.2.0/24.
  3. A known packet class should be rate-limited rather than completely dropped at all traffic levels.
  4. A routing instance contains internal prefixes but only one aggregate should be advertised to a peer.

Explanation

Correct Answer

B:

A source-address condition evaluates the source IP field of matching packets. This meets the stated need for firewall source-address match.

Incorrect Answers

A:

The longer-only route-filter match scenario has a different requirement: The longer operator excludes the stated base prefix while matching routes with additional prefix bits. It does not directly meet the firewall source-address match need in this question.

C:

The firewall policer rate limit scenario has a different requirement: A policer enforces rate or burst constraints for a class of packets according to its configured behavior. It does not directly meet the firewall source-address match need in this question.

D:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall source-address match need in this question.

Question 1025

An IPv4 filter should restrict traffic directed to server 198.51.100.20. Which configuration or troubleshooting action most directly meets the need?

  1. Define ordered terms within a policy-statement using from conditions and then actions.
  2. Combine protocol tcp with destination-port 22 in the relevant filter term.
  3. Match destination-address 198.51.100.20/32 in the correct filter term.
  4. Apply an export policy that permits only the intended aggregate to be advertised.

Explanation

Correct Answer

C:

A destination-address condition selects packets by the address of the intended recipient. This meets the stated need for firewall destination-address match.

Incorrect Answers

A:

The policy statement terms scenario has a different requirement: Junos routing policy statements use ordered terms that match route attributes and specify actions. It does not directly meet the firewall destination-address match need in this question.

B:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall destination-address match need in this question.

D:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall destination-address match need in this question.

Question 1026

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Match destination-address 198.51.100.20/32 in the correct filter term. Which concept or operating procedure is best illustrated?

  1. Policy statement terms
  2. Firewall destination-port match
  3. Firewall destination-address match
  4. Export routing policy

Explanation

Correct Answer

C:

A destination-address condition selects packets by the address of the intended recipient. This meets the stated need for firewall destination-address match.

Incorrect Answers

A:

The policy statement terms scenario has a different requirement: Junos routing policy statements use ordered terms that match route attributes and specify actions. It does not directly meet the firewall destination-address match need in this question.

B:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall destination-address match need in this question.

D:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall destination-address match need in this question.

Question 1027

An IPv4 filter should restrict traffic directed to server 198.51.100.20. The proposed response is: Match destination-address 198.51.100.20/32 in the correct filter term. Which explanation most accurately supports this response?

  1. Junos routing policy statements use ordered terms that match route attributes and specify actions.
  2. A destination-port match identifies the transport service being requested by the packet.
  3. Export policy controls which locally eligible routes a protocol sends to its neighbors.
  4. A destination-address condition selects packets by the address of the intended recipient.

Explanation

Correct Answer

D:

A destination-address condition selects packets by the address of the intended recipient. This meets the stated need for firewall destination-address match.

Incorrect Answers

A:

The policy statement terms scenario has a different requirement: Junos routing policy statements use ordered terms that match route attributes and specify actions. It does not directly meet the firewall destination-address match need in this question.

B:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall destination-address match need in this question.

C:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall destination-address match need in this question.

Question 1028

Within Routing Policy and Firewall Filters, a technician selects this approach: Match destination-address 198.51.100.20/32 in the correct filter term. Which original requirement or fault would most directly justify it?

  1. A routing policy must apply different actions to different route categories.
  2. An IPv4 filter should restrict traffic directed to server 198.51.100.20.
  3. An interface filter should identify TCP traffic intended for the SSH service on port 22.
  4. A routing instance contains internal prefixes but only one aggregate should be advertised to a peer.

Explanation

Correct Answer

B:

A destination-address condition selects packets by the address of the intended recipient. This meets the stated need for firewall destination-address match.

Incorrect Answers

A:

The policy statement terms scenario has a different requirement: Junos routing policy statements use ordered terms that match route attributes and specify actions. It does not directly meet the firewall destination-address match need in this question.

C:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall destination-address match need in this question.

D:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the firewall destination-address match need in this question.

Question 1029

A stateless filter should match TCP sessions while leaving UDP to other terms. Which configuration or troubleshooting action most directly meets the need?

  1. Check the protocol-specific default import and export rules before adding broad accept terms.
  2. Create ordered terms under firewall family inet filter with from and then statements.
  3. Use a from protocol tcp condition in the firewall filter term.
  4. Apply a routing export-policy deny term rather than a transit firewall filter.

Explanation

Correct Answer

C:

The protocol condition matches the IP protocol field rather than an application's name. This meets the stated need for firewall protocol tcp match.

Incorrect Answers

A:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the firewall protocol tcp match need in this question.

B:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the firewall protocol tcp match need in this question.

D:

The route policy versus packet filter impact scenario has a different requirement: An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. It does not directly meet the firewall protocol tcp match need in this question.

Question 1030

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use a from protocol tcp condition in the firewall filter term. Which concept or operating procedure is best illustrated?

  1. Firewall protocol TCP match
  2. Default routing-policy behavior
  3. Firewall filter term structure
  4. Route policy versus packet filter impact

Explanation

Correct Answer

A:

The protocol condition matches the IP protocol field rather than an application's name. This meets the stated need for firewall protocol tcp match.

Incorrect Answers

B:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the firewall protocol tcp match need in this question.

C:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the firewall protocol tcp match need in this question.

D:

The route policy versus packet filter impact scenario has a different requirement: An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. It does not directly meet the firewall protocol tcp match need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests