McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 102

Question 1010

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Check the protocol-specific default import and export rules before adding broad accept terms. Which concept or operating procedure is best illustrated?

  1. Export routing policy
  2. Policy next-hop action
  3. Default routing-policy behavior
  4. Firewall filter discard action

Explanation

Correct Answer

C:

Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. This meets the stated need for default routing-policy behavior.

Incorrect Answers

A:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the default routing-policy behavior need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the default routing-policy behavior need in this question.

D:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the default routing-policy behavior need in this question.

Question 1011

A routing protocol exchanges fewer routes than expected even though no custom policy is configured. The proposed response is: Check the protocol-specific default import and export rules before adding broad accept terms. Which explanation most accurately supports this response?

  1. Export policy controls which locally eligible routes a protocol sends to its neighbors.
  2. Routing policy can alter eligible route attributes, including supported next-hop behavior.
  3. Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement.
  4. Discard drops matched packets without explicitly returning an unreachable response.

Explanation

Correct Answer

C:

Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. This meets the stated need for default routing-policy behavior.

Incorrect Answers

A:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the default routing-policy behavior need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the default routing-policy behavior need in this question.

D:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the default routing-policy behavior need in this question.

Question 1012

Within Routing Policy and Firewall Filters, a technician selects this approach: Check the protocol-specific default import and export rules before adding broad accept terms. Which original requirement or fault would most directly justify it?

  1. A routing instance contains internal prefixes but only one aggregate should be advertised to a peer.
  2. A routing protocol exchanges fewer routes than expected even though no custom policy is configured.
  3. A policy needs to set an appropriate routing next-hop attribute for selected eligible routes.
  4. A stateless ingress policy should silently drop a known unwanted traffic class.

Explanation

Correct Answer

B:

Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. This meets the stated need for default routing-policy behavior.

Incorrect Answers

A:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the default routing-policy behavior need in this question.

C:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the default routing-policy behavior need in this question.

D:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the default routing-policy behavior need in this question.

Question 1013

A network engineer wants to block unwanted TCP packets arriving at an interface, not reject learned prefixes. Which configuration or troubleshooting action most directly meets the need?

  1. Use an interface firewall filter rather than a routing import/export policy.
  2. Use an appropriate then next term action rather than an immediate accept or reject.
  3. Use a policy from protocol static match condition for the static-route term.
  4. Combine protocol tcp with destination-port 22 in the relevant filter term.

Explanation

Correct Answer

A:

Firewall filters evaluate packets while routing policies influence route learning or advertisement. This meets the stated need for firewall filter versus routing policy.

Incorrect Answers

B:

The policy next term scenario has a different requirement: Next term continues evaluation to a subsequent term in the same policy statement. It does not directly meet the firewall filter versus routing policy need in this question.

C:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the firewall filter versus routing policy need in this question.

D:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall filter versus routing policy need in this question.

Question 1014

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use an interface firewall filter rather than a routing import/export policy. Which concept or operating procedure is best illustrated?

  1. Firewall filter versus routing policy
  2. Policy next term
  3. Policy match protocol
  4. Firewall destination-port match

Explanation

Correct Answer

A:

Firewall filters evaluate packets while routing policies influence route learning or advertisement. This meets the stated need for firewall filter versus routing policy.

Incorrect Answers

B:

The policy next term scenario has a different requirement: Next term continues evaluation to a subsequent term in the same policy statement. It does not directly meet the firewall filter versus routing policy need in this question.

C:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the firewall filter versus routing policy need in this question.

D:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall filter versus routing policy need in this question.

Question 1015

A network engineer wants to block unwanted TCP packets arriving at an interface, not reject learned prefixes. The proposed response is: Use an interface firewall filter rather than a routing import/export policy. Which explanation most accurately supports this response?

  1. Next term continues evaluation to a subsequent term in the same policy statement.
  2. The from protocol match selects routes based on their protocol origin.
  3. Firewall filters evaluate packets while routing policies influence route learning or advertisement.
  4. A destination-port match identifies the transport service being requested by the packet.

Explanation

Correct Answer

C:

Firewall filters evaluate packets while routing policies influence route learning or advertisement. This meets the stated need for firewall filter versus routing policy.

Incorrect Answers

A:

The policy next term scenario has a different requirement: Next term continues evaluation to a subsequent term in the same policy statement. It does not directly meet the firewall filter versus routing policy need in this question.

B:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the firewall filter versus routing policy need in this question.

D:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall filter versus routing policy need in this question.

Question 1016

Within Routing Policy and Firewall Filters, a technician selects this approach: Use an interface firewall filter rather than a routing import/export policy. Which original requirement or fault would most directly justify it?

  1. A route matches one policy term but should continue to a later term for further checks.
  2. A network engineer wants to block unwanted TCP packets arriving at an interface, not reject learned prefixes.
  3. An export policy must treat static routes differently from OSPF-learned routes.
  4. An interface filter should identify TCP traffic intended for the SSH service on port 22.

Explanation

Correct Answer

B:

Firewall filters evaluate packets while routing policies influence route learning or advertisement. This meets the stated need for firewall filter versus routing policy.

Incorrect Answers

A:

The policy next term scenario has a different requirement: Next term continues evaluation to a subsequent term in the same policy statement. It does not directly meet the firewall filter versus routing policy need in this question.

C:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the firewall filter versus routing policy need in this question.

D:

The firewall destination-port match scenario has a different requirement: A destination-port match identifies the transport service being requested by the packet. It does not directly meet the firewall filter versus routing policy need in this question.

Question 1017

A stateless IPv4 packet filter needs several named match-and-action rules. Which configuration or troubleshooting action most directly meets the need?

  1. Use route-filter 198.51.100.0/24 orlonger.
  2. Use supported loose unicast reverse-path verification where appropriate.
  3. Use supported strict unicast reverse-path forwarding verification.
  4. Create ordered terms under firewall family inet filter with from and then statements.

Explanation

Correct Answer

D:

Junos firewall filters organize packet match conditions and actions into ordered terms. This meets the stated need for firewall filter term structure.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter term structure need in this question.

B:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the firewall filter term structure need in this question.

C:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the firewall filter term structure need in this question.

Question 1018

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Create ordered terms under firewall family inet filter with from and then statements. Which concept or operating procedure is best illustrated?

  1. Orlonger route-filter match
  2. Firewall filter term structure
  3. Unicast RPF loose mode
  4. Unicast RPF strict mode

Explanation

Correct Answer

B:

Junos firewall filters organize packet match conditions and actions into ordered terms. This meets the stated need for firewall filter term structure.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter term structure need in this question.

C:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the firewall filter term structure need in this question.

D:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the firewall filter term structure need in this question.

Question 1019

A stateless IPv4 packet filter needs several named match-and-action rules. The proposed response is: Create ordered terms under firewall family inet filter with from and then statements. Which explanation most accurately supports this response?

  1. The orlonger operator matches the named prefix and more-specific routes beneath it.
  2. Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry.
  3. Junos firewall filters organize packet match conditions and actions into ordered terms.
  4. Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface.

Explanation

Correct Answer

C:

Junos firewall filters organize packet match conditions and actions into ordered terms. This meets the stated need for firewall filter term structure.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter term structure need in this question.

B:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the firewall filter term structure need in this question.

D:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the firewall filter term structure need in this question.

Question 1020

Within Routing Policy and Firewall Filters, a technician selects this approach: Create ordered terms under firewall family inet filter with from and then statements. Which original requirement or fault would most directly justify it?

  1. A routing policy should match 198.51.100.0/24 and any of its more-specific routes.
  2. A stateless IPv4 packet filter needs several named match-and-action rules.
  3. A multihomed edge sees asymmetric paths but should still drop packets with wholly unroutable source addresses.
  4. An ingress interface should reject packets whose source would not be reached through that same best return interface.

Explanation

Correct Answer

B:

Junos firewall filters organize packet match conditions and actions into ordered terms. This meets the stated need for firewall filter term structure.

Incorrect Answers

A:

The orlonger route-filter match scenario has a different requirement: The orlonger operator matches the named prefix and more-specific routes beneath it. It does not directly meet the firewall filter term structure need in this question.

C:

The unicast rpf loose mode scenario has a different requirement: Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. It does not directly meet the firewall filter term structure need in this question.

D:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the firewall filter term structure need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests