McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 101

Question 1000

Within Routing Policy and Firewall Filters, a technician selects this approach: Use a supported then preference value action for the intended matching term. Which original requirement or fault would most directly justify it?

  1. A team copied an IPv4-only family inet filter but needs to inspect IPv6 packets.
  2. A route should be evaluated by the next policy-statement in the configured policy list.
  3. An import policy should alter the selection preference for a subset of received routes.
  4. A routing protocol exchanges fewer routes than expected even though no custom policy is configured.

Explanation

Correct Answer

C:

Policy actions can modify preference attributes used later by route-selection logic. This meets the stated need for policy route preference action.

Incorrect Answers

A:

The ipv6 firewall filter family scenario has a different requirement: IPv6 packet filtering uses family inet6 rather than assuming an IPv4 family inet filter covers both protocols. It does not directly meet the policy route preference action need in this question.

B:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the policy route preference action need in this question.

D:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy route preference action need in this question.

Question 1001

An incoming BGP route should receive a different local preference for internal path selection. Which configuration or troubleshooting action most directly meets the need?

  1. Check the protocol-specific default import and export rules before adding broad accept terms.
  2. Set the appropriate BGP local-preference in a matching policy term.
  3. Use then reject for that term in the appropriate import or export policy.
  4. Use a then count action with a suitable counter name and a final packet decision.

Explanation

Correct Answer

B:

BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. This meets the stated need for policy local preference action.

Incorrect Answers

A:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy local preference action need in this question.

C:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the policy local preference action need in this question.

D:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the policy local preference action need in this question.

Question 1002

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Set the appropriate BGP local-preference in a matching policy term. Which concept or operating procedure is best illustrated?

  1. Default routing-policy behavior
  2. Policy then reject
  3. Firewall filter count action
  4. Policy local preference action

Explanation

Correct Answer

D:

BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. This meets the stated need for policy local preference action.

Incorrect Answers

A:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy local preference action need in this question.

B:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the policy local preference action need in this question.

C:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the policy local preference action need in this question.

Question 1003

An incoming BGP route should receive a different local preference for internal path selection. The proposed response is: Set the appropriate BGP local-preference in a matching policy term. Which explanation most accurately supports this response?

  1. BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter.
  2. Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement.
  3. A reject action terminates policy processing for that route with a negative decision.
  4. The count action increments a counter for matched packets and can be combined with forwarding disposition.

Explanation

Correct Answer

A:

BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. This meets the stated need for policy local preference action.

Incorrect Answers

B:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy local preference action need in this question.

C:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the policy local preference action need in this question.

D:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the policy local preference action need in this question.

Question 1004

Within Routing Policy and Firewall Filters, a technician selects this approach: Set the appropriate BGP local-preference in a matching policy term. Which original requirement or fault would most directly justify it?

  1. An incoming BGP route should receive a different local preference for internal path selection.
  2. A routing protocol exchanges fewer routes than expected even though no custom policy is configured.
  3. A route matched by a deny term must be excluded from the intended routing exchange.
  4. Operators need a running counter for traffic matching one specific firewall filter term.

Explanation

Correct Answer

A:

BGP local preference influences route choice within an autonomous system without being a generic Ethernet filter. This meets the stated need for policy local preference action.

Incorrect Answers

B:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy local preference action need in this question.

C:

The policy then reject scenario has a different requirement: A reject action terminates policy processing for that route with a negative decision. It does not directly meet the policy local preference action need in this question.

D:

The firewall filter count action scenario has a different requirement: The count action increments a counter for matched packets and can be combined with forwarding disposition. It does not directly meet the policy local preference action need in this question.

Question 1005

A policy needs to set an appropriate routing next-hop attribute for selected eligible routes. Which configuration or troubleshooting action most directly meets the need?

  1. Use a supported next-hop action in the correct routing policy context.
  2. Apply a suitable BGP import policy that accepts approved prefixes and rejects the rest.
  3. Apply a carefully designed input firewall filter to the lo0 interface as supported.
  4. Expect other unmatched packets to be discarded by the default firewall filter action.

Explanation

Correct Answer

A:

Routing policy can alter eligible route attributes, including supported next-hop behavior. This meets the stated need for policy next-hop action.

Incorrect Answers

B:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the policy next-hop action need in this question.

C:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy next-hop action need in this question.

D:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the policy next-hop action need in this question.

Question 1006

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use a supported next-hop action in the correct routing policy context. Which concept or operating procedure is best illustrated?

  1. Import routing policy
  2. Policy next-hop action
  3. Protect Routing Engine lo0
  4. Implicit final filter discard

Explanation

Correct Answer

B:

Routing policy can alter eligible route attributes, including supported next-hop behavior. This meets the stated need for policy next-hop action.

Incorrect Answers

A:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the policy next-hop action need in this question.

C:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy next-hop action need in this question.

D:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the policy next-hop action need in this question.

Question 1007

A policy needs to set an appropriate routing next-hop attribute for selected eligible routes. The proposed response is: Use a supported next-hop action in the correct routing policy context. Which explanation most accurately supports this response?

  1. Import policy controls which received routes a protocol can install or retain for route selection.
  2. A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges.
  3. Routing policy can alter eligible route attributes, including supported next-hop behavior.
  4. Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match.

Explanation

Correct Answer

C:

Routing policy can alter eligible route attributes, including supported next-hop behavior. This meets the stated need for policy next-hop action.

Incorrect Answers

A:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the policy next-hop action need in this question.

B:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy next-hop action need in this question.

D:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the policy next-hop action need in this question.

Question 1008

Within Routing Policy and Firewall Filters, a technician selects this approach: Use a supported next-hop action in the correct routing policy context. Which original requirement or fault would most directly justify it?

  1. A router receives BGP prefixes but should accept only approved destination networks into its route table.
  2. A router's management and routing-protocol traffic should be restricted to approved control-plane sources.
  3. A policy needs to set an appropriate routing next-hop attribute for selected eligible routes.
  4. A firewall filter has only a permit term for a management subnet and no explicit final term.

Explanation

Correct Answer

C:

Routing policy can alter eligible route attributes, including supported next-hop behavior. This meets the stated need for policy next-hop action.

Incorrect Answers

A:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the policy next-hop action need in this question.

B:

The protect routing engine lo0 scenario has a different requirement: A loopback input filter can protect traffic destined for the Routing Engine while preserving required protocol exchanges. It does not directly meet the policy next-hop action need in this question.

D:

The implicit final filter discard scenario has a different requirement: Junos firewall filter processing normally discards packets that reach the implicit end without an accepting match. It does not directly meet the policy next-hop action need in this question.

Question 1009

A routing protocol exchanges fewer routes than expected even though no custom policy is configured. Which configuration or troubleshooting action most directly meets the need?

  1. Apply an export policy that permits only the intended aggregate to be advertised.
  2. Use a supported next-hop action in the correct routing policy context.
  3. Check the protocol-specific default import and export rules before adding broad accept terms.
  4. Use then discard in the matching firewall filter term.

Explanation

Correct Answer

C:

Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. This meets the stated need for default routing-policy behavior.

Incorrect Answers

A:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the default routing-policy behavior need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the default routing-policy behavior need in this question.

D:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the default routing-policy behavior need in this question.

Question 1010

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Check the protocol-specific default import and export rules before adding broad accept terms. Which concept or operating procedure is best illustrated?

  1. Export routing policy
  2. Policy next-hop action
  3. Default routing-policy behavior
  4. Firewall filter discard action

Explanation

Correct Answer

C:

Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. This meets the stated need for default routing-policy behavior.

Incorrect Answers

A:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the default routing-policy behavior need in this question.

B:

The policy next-hop action scenario has a different requirement: Routing policy can alter eligible route attributes, including supported next-hop behavior. It does not directly meet the default routing-policy behavior need in this question.

D:

The firewall filter discard action scenario has a different requirement: Discard drops matched packets without explicitly returning an unreachable response. It does not directly meet the default routing-policy behavior need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests