McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 100

Question 990

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use an appropriate then next term action rather than an immediate accept or reject. Which concept or operating procedure is best illustrated?

  1. Longer-only route-filter match
  2. Egress firewall filter
  3. Policy next term
  4. Import routing policy

Explanation

Correct Answer

C:

Next term continues evaluation to a subsequent term in the same policy statement. This meets the stated need for policy next term.

Incorrect Answers

A:

The longer-only route-filter match scenario has a different requirement: The longer operator excludes the stated base prefix while matching routes with additional prefix bits. It does not directly meet the policy next term need in this question.

B:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy next term need in this question.

D:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the policy next term need in this question.

Question 991

A route matches one policy term but should continue to a later term for further checks. The proposed response is: Use an appropriate then next term action rather than an immediate accept or reject. Which explanation most accurately supports this response?

  1. The longer operator excludes the stated base prefix while matching routes with additional prefix bits.
  2. An output filter evaluates eligible packets on egress rather than at ingress.
  3. Next term continues evaluation to a subsequent term in the same policy statement.
  4. Import policy controls which received routes a protocol can install or retain for route selection.

Explanation

Correct Answer

C:

Next term continues evaluation to a subsequent term in the same policy statement. This meets the stated need for policy next term.

Incorrect Answers

A:

The longer-only route-filter match scenario has a different requirement: The longer operator excludes the stated base prefix while matching routes with additional prefix bits. It does not directly meet the policy next term need in this question.

B:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy next term need in this question.

D:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the policy next term need in this question.

Question 992

Within Routing Policy and Firewall Filters, a technician selects this approach: Use an appropriate then next term action rather than an immediate accept or reject. Which original requirement or fault would most directly justify it?

  1. A policy must match only more-specifics of 203.0.113.0/24, not the /24 itself.
  2. A traffic policy should classify or restrict packets as they leave the interface toward a downstream network.
  3. A router receives BGP prefixes but should accept only approved destination networks into its route table.
  4. A route matches one policy term but should continue to a later term for further checks.

Explanation

Correct Answer

D:

Next term continues evaluation to a subsequent term in the same policy statement. This meets the stated need for policy next term.

Incorrect Answers

A:

The longer-only route-filter match scenario has a different requirement: The longer operator excludes the stated base prefix while matching routes with additional prefix bits. It does not directly meet the policy next term need in this question.

B:

The egress firewall filter scenario has a different requirement: An output filter evaluates eligible packets on egress rather than at ingress. It does not directly meet the policy next term need in this question.

C:

The import routing policy scenario has a different requirement: Import policy controls which received routes a protocol can install or retain for route selection. It does not directly meet the policy next term need in this question.

Question 993

A route should be evaluated by the next policy-statement in the configured policy list. Which configuration or troubleshooting action most directly meets the need?

  1. Use a supported then preference value action for the intended matching term.
  2. Apply an export policy that permits only the intended aggregate to be advertised.
  3. Use then next policy where the configured policy chain supports it.
  4. Use then reject with the applicable supported behavior for the filter term.

Explanation

Correct Answer

C:

Next policy transfers evaluation to the next policy statement rather than finishing with a decision. This meets the stated need for policy next policy.

Incorrect Answers

A:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the policy next policy need in this question.

B:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the policy next policy need in this question.

D:

The firewall filter reject action scenario has a different requirement: Reject drops matching packets and can generate an error response, unlike silent discard. It does not directly meet the policy next policy need in this question.

Question 994

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use then next policy where the configured policy chain supports it. Which concept or operating procedure is best illustrated?

  1. Policy route preference action
  2. Policy next policy
  3. Export routing policy
  4. Firewall filter reject action

Explanation

Correct Answer

B:

Next policy transfers evaluation to the next policy statement rather than finishing with a decision. This meets the stated need for policy next policy.

Incorrect Answers

A:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the policy next policy need in this question.

C:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the policy next policy need in this question.

D:

The firewall filter reject action scenario has a different requirement: Reject drops matching packets and can generate an error response, unlike silent discard. It does not directly meet the policy next policy need in this question.

Question 995

A route should be evaluated by the next policy-statement in the configured policy list. The proposed response is: Use then next policy where the configured policy chain supports it. Which explanation most accurately supports this response?

  1. Policy actions can modify preference attributes used later by route-selection logic.
  2. Next policy transfers evaluation to the next policy statement rather than finishing with a decision.
  3. Export policy controls which locally eligible routes a protocol sends to its neighbors.
  4. Reject drops matching packets and can generate an error response, unlike silent discard.

Explanation

Correct Answer

B:

Next policy transfers evaluation to the next policy statement rather than finishing with a decision. This meets the stated need for policy next policy.

Incorrect Answers

A:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the policy next policy need in this question.

C:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the policy next policy need in this question.

D:

The firewall filter reject action scenario has a different requirement: Reject drops matching packets and can generate an error response, unlike silent discard. It does not directly meet the policy next policy need in this question.

Question 996

Within Routing Policy and Firewall Filters, a technician selects this approach: Use then next policy where the configured policy chain supports it. Which original requirement or fault would most directly justify it?

  1. An import policy should alter the selection preference for a subset of received routes.
  2. A routing instance contains internal prefixes but only one aggregate should be advertised to a peer.
  3. A route should be evaluated by the next policy-statement in the configured policy list.
  4. An ingress filter should refuse certain traffic with a supported error response instead of a silent drop.

Explanation

Correct Answer

C:

Next policy transfers evaluation to the next policy statement rather than finishing with a decision. This meets the stated need for policy next policy.

Incorrect Answers

A:

The policy route preference action scenario has a different requirement: Policy actions can modify preference attributes used later by route-selection logic. It does not directly meet the policy next policy need in this question.

B:

The export routing policy scenario has a different requirement: Export policy controls which locally eligible routes a protocol sends to its neighbors. It does not directly meet the policy next policy need in this question.

D:

The firewall filter reject action scenario has a different requirement: Reject drops matching packets and can generate an error response, unlike silent discard. It does not directly meet the policy next policy need in this question.

Question 997

An import policy should alter the selection preference for a subset of received routes. Which configuration or troubleshooting action most directly meets the need?

  1. Create and attach an appropriate family inet6 firewall filter for IPv6 traffic.
  2. Use then next policy where the configured policy chain supports it.
  3. Use a supported then preference value action for the intended matching term.
  4. Check the protocol-specific default import and export rules before adding broad accept terms.

Explanation

Correct Answer

C:

Policy actions can modify preference attributes used later by route-selection logic. This meets the stated need for policy route preference action.

Incorrect Answers

A:

The ipv6 firewall filter family scenario has a different requirement: IPv6 packet filtering uses family inet6 rather than assuming an IPv4 family inet filter covers both protocols. It does not directly meet the policy route preference action need in this question.

B:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the policy route preference action need in this question.

D:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy route preference action need in this question.

Question 998

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use a supported then preference value action for the intended matching term. Which concept or operating procedure is best illustrated?

  1. Policy route preference action
  2. IPv6 firewall filter family
  3. Policy next policy
  4. Default routing-policy behavior

Explanation

Correct Answer

A:

Policy actions can modify preference attributes used later by route-selection logic. This meets the stated need for policy route preference action.

Incorrect Answers

B:

The ipv6 firewall filter family scenario has a different requirement: IPv6 packet filtering uses family inet6 rather than assuming an IPv4 family inet filter covers both protocols. It does not directly meet the policy route preference action need in this question.

C:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the policy route preference action need in this question.

D:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy route preference action need in this question.

Question 999

An import policy should alter the selection preference for a subset of received routes. The proposed response is: Use a supported then preference value action for the intended matching term. Which explanation most accurately supports this response?

  1. IPv6 packet filtering uses family inet6 rather than assuming an IPv4 family inet filter covers both protocols.
  2. Policy actions can modify preference attributes used later by route-selection logic.
  3. Next policy transfers evaluation to the next policy statement rather than finishing with a decision.
  4. Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement.

Explanation

Correct Answer

B:

Policy actions can modify preference attributes used later by route-selection logic. This meets the stated need for policy route preference action.

Incorrect Answers

A:

The ipv6 firewall filter family scenario has a different requirement: IPv6 packet filtering uses family inet6 rather than assuming an IPv4 family inet filter covers both protocols. It does not directly meet the policy route preference action need in this question.

C:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the policy route preference action need in this question.

D:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy route preference action need in this question.

Question 1000

Within Routing Policy and Firewall Filters, a technician selects this approach: Use a supported then preference value action for the intended matching term. Which original requirement or fault would most directly justify it?

  1. A team copied an IPv4-only family inet filter but needs to inspect IPv6 packets.
  2. A route should be evaluated by the next policy-statement in the configured policy list.
  3. An import policy should alter the selection preference for a subset of received routes.
  4. A routing protocol exchanges fewer routes than expected even though no custom policy is configured.

Explanation

Correct Answer

C:

Policy actions can modify preference attributes used later by route-selection logic. This meets the stated need for policy route preference action.

Incorrect Answers

A:

The ipv6 firewall filter family scenario has a different requirement: IPv6 packet filtering uses family inet6 rather than assuming an IPv4 family inet filter covers both protocols. It does not directly meet the policy route preference action need in this question.

B:

The policy next policy scenario has a different requirement: Next policy transfers evaluation to the next policy statement rather than finishing with a decision. It does not directly meet the policy route preference action need in this question.

D:

The default routing-policy behavior scenario has a different requirement: Junos routing protocols have defined default routing policies; lack of custom policy does not imply universal advertisement. It does not directly meet the policy route preference action need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests