McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 60

Question 590

At a training network, one Cisco router uses router ospf 10 and its peer uses router ospf 200. All required OSPFv2 adjacency settings match. Does the process-number mismatch prevent peering?

  1. A different process number forces one router to use OSPFv3 instead
  2. Process ID values define each OSPF area ID on the wire
  3. Neighbors must have exactly the same local process number to exchange LSAs
  4. OSPF process IDs are locally significant and do not need to match on neighboring routers

Explanation

Correct Answer

D:

In Cisco IOS the router ospf process number is local; area and adjacency parameters matter between peers.

Incorrect Answers

A:

OSPFv2/v3 selection is not determined by arbitrary local process number differences.

B:

OSPF area ID is configured independently of the local process ID.

C:

The local process IDs are not carried as a matching neighbor parameter.

Question 591

A broadcast OSPFv2 subnet at a retail store already has an active DR. Another router joins with higher interface priority but the current DR remains healthy. What should be expected?

  1. DR/BDR election is decided by the OSPF route metric, not interface priority
  2. A priority-0 router always becomes DR when it connects
  3. The new router always replaces the DR the instant it sees a higher priority
  4. The new higher-priority router does not automatically preempt an already elected operational DR

Explanation

Correct Answer

D:

OSPF DR election is nonpreemptive; an existing working DR remains in role until a new election event.

Incorrect Answers

A:

DR election uses interface priority and router ID, not an OSPF route metric.

B:

Priority 0 makes a router ineligible for DR or BDR election.

C:

OSPF does not preempt a healthy existing DR on the arrival of a higher-priority neighbor.

Question 592

On an Ethernet segment at a virtualized testing environment, HQ-RT treats the interface as point-to-point while its peer expects broadcast OSPF DR election. What configuration agreement needs attention?

  1. Ignore area and network type because OSPF uses only router-ID values
  2. Set the OSPF router ID equal to each host IP address on the VLAN
  3. Choose the larger OSPF process ID as the designated router
  4. Verify that each peer uses matching OSPF interface network type and compatible area configuration

Explanation

Correct Answer

D:

Compatible OSPF link type and area parameters are prerequisites for expected adjacency and DR behavior.

Incorrect Answers

A:

Area mismatches and unexpected network types are common adjacency issues.

B:

Router IDs are per-router logical identifiers rather than per-user IP assignments.

C:

Local process numbers do not govern DR election.

Question 593

R1 shows an OSPFv2 peer in INIT. R1 receives the peer’s Hello, but its own router ID is missing from the peer’s advertised neighbor list. What does INIT most directly indicate?

  1. One-way Hello reception; two-way neighbor recognition has not been confirmed
  2. A fully synchronized LSDB with neighbor state FULL
  3. The peer is a backup designated router with priority zero
  4. A successful master/slave database exchange

Explanation

Correct Answer

A:

INIT means a Hello was received but the neighbor has not yet acknowledged seeing this router’s ID.

Incorrect Answers

B:

FULL indicates database exchange completed, not INIT.

C:

Priority zero prevents DR/BDR election and does not itself explain the INIT state.

D:

Master/slave negotiation occurs in ExStart, later than one-way INIT discovery.

Question 594

EDGE1 is running OSPFv2 with router ID 10.10.1.1. An engineer adds `router-id 10.10.37.1` under its existing `router ospf 13` process, but `show ip ospf` still displays the old ID. What further step applies the new ID?

  1. Add a `network 10.10.37.1 0.0.0.0 area 0` statement without restarting OSPF
  2. Change the local Ethernet interface description to include 10.10.37.1
  3. Copy running-config to startup-config; the active process ID changes immediately
  4. In a controlled maintenance window, restart the OSPF process after configuring the new router ID

Explanation

Correct Answer

D:

IOS applies a changed explicit router ID when the OSPF process restarts or the device reloads; a process restart can briefly disrupt adjacencies.

Incorrect Answers

A:

An OSPF network statement selects local interfaces; it does not force an already running process to adopt a newly configured router ID.

B:

Interface descriptions are documentation; OSPF does not choose its process router ID from that text.

C:

Saving configuration does not itself restart the OSPF process or change its active router ID.

Question 595

OSPFv2 process 5 has no explicit router ID. A router has loopback addresses 10.0.0.9 and 10.0.0.12 and active physical interface 192.0.2.55. Which IPv4 address is normally chosen for its router ID?

  1. 10.0.0.9
  2. 0.0.0.5
  3. 10.0.0.12
  4. 192.0.2.55

Explanation

Correct Answer

C:

With no explicit router-id, IOS chooses the highest IP on an active loopback before considering physical interfaces.

Incorrect Answers

A:

10.0.0.9 is lower than the other candidate loopback 10.0.0.12.

B:

The local OSPF process number 5 does not constitute a router ID.

D:

A higher physical interface IP is not chosen over available loopbacks.

Question 596

R1 sends OSPFv2 Hellos from its Gi0/0 in area 0, while R2 uses area 7 on the directly attached interface. Their IP, timers and masks match. Which correction enables adjacency on that link?

  1. Set both interfaces to passive-interface.
  2. Put both participating interfaces in the same OSPF area.
  3. Raise the DR priority on R2 to 255.
  4. Set both routers to the same local OSPF process number.

Explanation

Correct Answer

B:

OSPF neighbors on a shared link must agree on area ID; local process identifiers can differ.

Incorrect Answers

A:

Passive-interface stops Hellos, preventing a normal neighbor adjacency.

C:

DR priority does not resolve a different area ID on a link.

D:

Cisco OSPF process IDs are local and do not have to match between neighbors.

Question 597

`show ip ospf interface` shows R1 Hello 10 seconds / Dead 40 seconds, whereas adjacent R2 advertises Hello 30 / Dead 120. Both are area 0. What is the specific adjacency blocker?

  1. Different IPv4 host addresses on each interface.
  2. Inconsistent Hello and Dead intervals on the shared subnet.
  3. The absence of an OSPF default route.
  4. Using the same area ID.

Explanation

Correct Answer

B:

OSPF neighbors on the link must agree on Hello and Dead timers.

Incorrect Answers

A:

Distinct valid interface addresses are required for two separate neighbor devices.

C:

A default route is not needed for Hello neighbor discovery on a connected segment.

D:

Matching area IDs support adjacency and are not the mismatch described.

Question 598

Two OSPFv2 routers advertise identical router IDs 10.0.0.9 in the same routing domain. Their interfaces use distinct IP addresses. What should be corrected?

  1. Use the same OSPF router priority on all interfaces
  2. Set both routers to the same hostname
  3. Assign unique router IDs to the routers
  4. Configure identical interface MAC addresses as well

Explanation

Correct Answer

C:

OSPF requires a unique 32-bit router ID per participating router to distinguish link-state origins.

Incorrect Answers

A:

Interface priority controls DR candidacy, not router-ID uniqueness.

B:

Common hostnames do not distinguish OSPF link-state router identities.

D:

Duplicating MAC addresses would create an additional Layer 2 conflict.

Question 599

Two routers on the same OSPFv2 segment are accidentally configured with `router-id 1.1.1.1`. Other parameters match. What must the engineer correct?

  1. Configure distinct OSPF router IDs and restart/clear the processes as needed to apply them.
  2. Switch the area ID to 1 while leaving duplicate router IDs.
  3. Use the same physical MAC address on both links.
  4. Assign both routers the same priority to preserve their identity.

Explanation

Correct Answer

A:

Router IDs uniquely identify OSPF routers; a duplicate identity can prevent stable neighbor relationships.

Incorrect Answers

B:

Changing area ID leaves the conflicting router IDs in place.

C:

MAC address reuse creates additional Layer 2 conflicts and is unrelated to OSPF router ID uniqueness.

D:

Equal interface priorities do not repair duplicate router identity.

Question 600

An OSPFv2 interface participating in a broadcast VLAN reports `Priority 0` in `show ip ospf interface`. The operator wants to know if the router can be elected DR on that VLAN. Which conclusion follows?

  1. It is guaranteed to become DR because zero is the best priority
  2. It is ineligible to become DR or BDR while its interface priority is zero
  3. The interface must be point-to-point because priority is zero
  4. The router stops sending Hellos solely due to interface priority zero

Explanation

Correct Answer

B:

A priority of zero excludes an OSPF router from DR and BDR elections on that broadcast segment.

Incorrect Answers

A:

OSPF chooses higher eligible priorities, not the smallest.

C:

Broadcast interfaces can have priority zero while still forming permitted neighbor relationships.

D:

Passive-interface configuration, not DR priority zero, suppresses Hellos.