McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 58

Question 570

A router has several specific 10.0.0.0/8 routes but lacks an exit route for other IPv4 prefixes. Which static route destination matches otherwise-unmatched IPv4 traffic?

  1. `255.255.255.255 255.255.255.255`
  2. `0.0.0.0 0.0.0.0`
  3. `10.0.0.0 255.0.0.0`
  4. `0.0.0.0 255.255.255.255`

Explanation

Correct Answer

B:

An IPv4 /0 route matches every IPv4 destination, but loses to more-specific routes by longest-prefix selection.

Incorrect Answers

A:

255.255.255.255/32 denotes one special IPv4 address, not a default route.

C:

10.0.0.0/8 covers only one private block, not all other networks.

D:

/32 at 0.0.0.0 matches one address, not all unspecified destinations.

Question 571

The primary static route to 10.150.0.0/16 goes through 192.0.2.5 with AD 1. A second configured route through 192.0.2.9 has AD 50. Both next hops are reachable. Which outcome is expected?

  1. Both paths are automatically installed for equal-cost forwarding
  2. The AD 50 route wins because its numeric distance is larger
  3. Neither route can be used because both have static origin
  4. The AD 1 route is selected and the AD 50 path is standby for that same prefix

Explanation

Correct Answer

D:

For identical static destination lengths, the lower administrative distance remains preferred while available.

Incorrect Answers

A:

Different administrative distances do not form equal-preference static multipath entries.

B:

Larger administrative distance means less preferred, not greater priority.

C:

It is valid to configure two static paths for the same prefix with different administrative distances.

Question 572

A network monitor at 10.19.50.11 must be reached by a distinct static path while surrounding 10.19.50.0/24 traffic uses normal routing. Which prefix mask makes the static route target only that host?

  1. 0.0.0.0
  2. 255.255.255.0
  3. 255.255.0.0
  4. 255.255.255.255

Explanation

Correct Answer

D:

The /32 mask matches exactly one IPv4 address rather than the whole /24 subnet.

Incorrect Answers

A:

A /0 matches every IPv4 destination and is a default route.

B:

A /24 route covers all hosts in that subnet, not just .11.

C:

A /16 route could influence far more destinations than the monitor host.

Question 573

A technician needs to verify which static routes are currently installed and active, not merely configured in startup or running configuration. Which command is most targeted?

  1. `show interface status`
  2. `show ip route static`
  3. `show running-config | include ip route`
  4. `show ip arp`

Explanation

Correct Answer

B:

show ip route static lists installed IPv4 static route entries in the current routing table.

Incorrect Answers

A:

Interface status alone does not enumerate installed static routing prefixes.

C:

The running configuration can include unresolved or higher-AD floating routes that are not installed.

D:

ARP resolution lists IP-to-MAC entries and is not the installed static route table.

Question 574

A router has Gi0/0 at 203.0.113.1/30 and peer Gi0/0 at 203.0.113.2/30. Remote LAN 10.77.4.0/24 is behind the peer. Which next-hop value should a static route to that LAN use?

  1. 10.77.4.0
  2. 203.0.113.1
  3. 203.0.113.3
  4. 203.0.113.2

Explanation

Correct Answer

D:

203.0.113.2 is the reachable adjacent router address on the shared /30 transit segment.

Incorrect Answers

A:

10.77.4.0 names the remote destination subnet, not a reachable adjacent next-hop router.

B:

203.0.113.1 is the local interface address, not the remote next hop.

C:

203.0.113.3 is the /30 broadcast address. In a normal /30, the four addresses represent a network ID, two usable addresses and a broadcast.

Question 575

R5 has Gi0/0 configured with 2001:db8:55::1/64 and a valid static IPv6 route, yet does not forward packets between IPv6 interfaces. Which global feature needs to be enabled?

  1. `no ip domain-lookup`
  2. `ip routing` without IPv6 forwarding
  3. `ip classless`
  4. `ipv6 unicast-routing`

Explanation

Correct Answer

D:

Global ipv6 unicast-routing enables the router to forward IPv6 packets across its configured interfaces.

Incorrect Answers

A:

Disabling DNS lookups does not enable the IPv6 data plane.

B:

IPv4 ip routing alone does not activate the IPv6 unicast-forwarding control.

C:

ip classless concerns IPv4 route lookup behavior, not enabling IPv6 forwarding.

Question 576

A VLAN has many /24 networks, but the only desired static override is the exact host 10.90.5.47. The engineer mistakenly enters `ip route 10.90.5.47 255.255.255.0 192.0.2.8`. Which mask belongs in the corrected host route?

  1. 255.255.255.0 to keep the /24
  2. 255.255.0.0 for a /16 summary
  3. 0.0.0.0 for the default route
  4. 255.255.255.255 for a /32 host route

Explanation

Correct Answer

D:

A /32 contains zero host bits and refers only to 10.90.5.47.

Incorrect Answers

A:

This masks an entire /24 and does not select a single host.

B:

A /16 covers a much larger allocation than the requested host.

C:

The zero mask is used for an IPv4 default route and cannot isolate one host.

Question 577

R1 shows the static route `S 192.168.70.0/24 [200/0] via 203.0.113.2` after an OSPF failure. What can the operator infer from the bracketed administrative distance?

  1. A manually configured static route with AD 200 is currently installed as an available fallback
  2. The route is an OSPF intra-area path with cost 200
  3. A lower-AD static route with AD 1 is guaranteed active concurrently
  4. The routing table line proves the entire destination subnet is directly connected

Explanation

Correct Answer

A:

The S code denotes static and the bracket 200/0 indicates AD 200 and metric 0; it can appear when a preferred path is gone.

Incorrect Answers

B:

OSPF routes use O code and normally present AD 110 unless explicitly changed.

C:

The observed route has AD 200; the output alone does not prove an alternative AD 1 path exists.

D:

A via-next-hop static route is not a connected C entry.

Question 578

An IPv4 static route points toward 192.0.2.42. The engineer discovers Gi0/0 is administratively down, and 192.0.2.42 was directly reachable only on Gi0/0. What must happen before relying on that static path?

  1. Increase the static route administrative distance to 255
  2. Configure an unrelated Loopback0 description
  3. Restore the connected exit path or another valid route to 192.0.2.42
  4. Change the destination network mask to /0

Explanation

Correct Answer

C:

The next hop must be reachable via an active route before the static destination can forward through it.

Incorrect Answers

A:

Distance 255 is unusable and does not make the missing next hop reachable.

B:

A loopback description neither raises Gi0/0 nor resolves the peer.

D:

Broadening the destination does not create a live path to the configured peer.

Question 579

R2 connects to remote subnet 172.19.5.0/24 through its serial point-to-point interface Serial0/1/0. What IPv4 static-route form uses only that exit interface?

  1. ip route 172.19.5.0 255.255.255.255 Serial0/1/0
  2. ip route 172.19.5.0 255.255.255.0 Serial0/1/0
  3. ip route 172.19.5.0 255.255.255.0 GigabitEthernet0/0
  4. ipv6 route 172.19.5.0/24 Serial0/1/0

Explanation

Correct Answer

B:

On a point-to-point interface, the destination route can specify the outgoing serial interface.

Incorrect Answers

A:

This /32 mask would not cover the requested /24 network.

C:

The route would point to the wrong interface instead of the remote serial link.

D:

The IPv6 static-route command cannot create an IPv4 route.

Question 580

A technician tries to configure a network route to 10.9.32.0/20 through next hop 192.0.2.1. Which form uses the correct dotted mask and destination boundary?

  1. ip route 10.9.32.0 255.255.240.0 192.0.2.1
  2. ip route 10.9.32.0 255.255.248.0 192.0.2.1
  3. ip route 10.9.40.0 255.255.240.0 192.0.2.1
  4. ip route 10.9.32.0 255.255.224.0 192.0.2.1

Explanation

Correct Answer

A:

A /20 spans third octets 32–47 and has mask 255.255.240.0.

Incorrect Answers

B:

Mask 255.255.248.0 is /21 and covers only half of the requested /20.

C:

Third octet 40 is not an aligned /20 network boundary.

D:

Mask 255.255.224.0 is /19, which is twice as broad as /20.