McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 37

Question 360

A controller-managed AP broadcasts standard secure SSIDs and associates users on the office floor. Which AP operating mode is typical?

  1. Monitor mode for RF/security scanning without ordinary client service
  2. Local mode on a lightweight AP
  3. Bridge/mesh AP mode for a wireless backhaul
  4. Sniffer mode for targeted wireless frame capture

Explanation

Correct Answer

B:

Client association and traffic servicing is the central purpose of Local AP mode.

Incorrect Answers

A:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for associating production office WLAN users under controller management, the relevant operation is serving centrally switched user WLAN traffic, not monitoring the airspace for rogues and RF/security events.

C:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for associating production office WLAN users under controller management, the relevant operation is serving centrally switched user WLAN traffic, not connecting network infrastructure over a wireless bridge.

D:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for associating production office WLAN users under controller management, the relevant operation is serving centrally switched user WLAN traffic, not capturing 802.11 frames for a remote packet analysis tool.

Question 361

A branch AP has a WAN to headquarters but must locally bridge its client traffic into branch VLANs. Which AP capability allows that behavior?

  1. Sniffer mode for targeted wireless frame capture
  2. FlexConnect local switching where supported
  3. Controller-based WLAN with CAPWAP-managed lightweight access points
  4. Monitor mode for RF/security scanning without ordinary client service

Explanation

Correct Answer

B:

FlexConnect can keep eligible data forwarding local while using the controller for management.

Incorrect Answers

A:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for keeping branch-user frames locally switched into branch VLANs, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not capturing 802.11 frames for a remote packet analysis tool.

C:

A wireless LAN controller centrally manages supported lightweight AP configurations and policies; for keeping branch-user frames locally switched into branch VLANs, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not coordinating WLAN policy across many lightweight APs.

D:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for keeping branch-user frames locally switched into branch VLANs, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not monitoring the airspace for rogues and RF/security events.

Question 362

A remote construction site uses wireless AP backhaul to connect temporary infrastructure switches. Which mode family supports infrastructure bridging?

  1. Local mode on a lightweight AP
  2. Sniffer mode for targeted wireless frame capture
  3. Monitor mode for RF/security scanning without ordinary client service
  4. Bridge/mesh AP mode for a wireless backhaul

Explanation

Correct Answer

D:

A supported mesh/bridge mode uses wireless links as the infrastructure transport.

Incorrect Answers

A:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for a construction site using APs for switch-to-switch wireless backhaul, the relevant operation is connecting network infrastructure over a wireless bridge, not serving centrally switched user WLAN traffic.

B:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for a construction site using APs for switch-to-switch wireless backhaul, the relevant operation is connecting network infrastructure over a wireless bridge, not capturing 802.11 frames for a remote packet analysis tool.

C:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for a construction site using APs for switch-to-switch wireless backhaul, the relevant operation is connecting network infrastructure over a wireless bridge, not monitoring the airspace for rogues and RF/security events.

Question 363

An RF monitoring appliance must identify nearby rogue transmitters and coverage problems without presenting a production SSID. Which mode is suitable?

  1. Bridge/mesh AP mode for a wireless backhaul
  2. Local mode on a lightweight AP
  3. FlexConnect local switching where supported
  4. Monitor mode for RF/security scanning without ordinary client service

Explanation

Correct Answer

D:

Monitor operation scans radio activity instead of carrying normal wireless clients.

Incorrect Answers

A:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for detecting rogues without transmitting a production SSID, the relevant operation is monitoring the airspace for rogues and RF/security events, not connecting network infrastructure over a wireless bridge.

B:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for detecting rogues without transmitting a production SSID, the relevant operation is monitoring the airspace for rogues and RF/security events, not serving centrally switched user WLAN traffic.

C:

FlexConnect can switch supported client VLAN traffic locally at remote branches under controller-based management; for detecting rogues without transmitting a production SSID, the relevant operation is monitoring the airspace for rogues and RF/security events, not local client forwarding when WAN/controller communication is disrupted.

Question 364

A support engineer wants a remote wireless analyzer to view 802.11 management exchanges recorded by a dedicated AP. Which mode is relevant?

  1. Sniffer mode for targeted wireless frame capture
  2. FlexConnect local switching where supported
  3. Bridge/mesh AP mode for a wireless backhaul
  4. Local mode on a lightweight AP

Explanation

Correct Answer

A:

Sniffer mode captures over-the-air frames for analysis.

Incorrect Answers

B:

FlexConnect can switch supported client VLAN traffic locally at remote branches under controller-based management; for exporting 802.11 management exchanges to a remote analyzer, the relevant operation is capturing 802.11 frames for a remote packet analysis tool, not local client forwarding when WAN/controller communication is disrupted.

C:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for exporting 802.11 management exchanges to a remote analyzer, the relevant operation is capturing 802.11 frames for a remote packet analysis tool, not connecting network infrastructure over a wireless bridge.

D:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for exporting 802.11 management exchanges to a remote analyzer, the relevant operation is capturing 802.11 frames for a remote packet analysis tool, not serving centrally switched user WLAN traffic.

Question 365

A headquarters redesign centralizes WLAN identities and policy while leaving dozens of AP radios distributed among buildings. What architecture is it adopting?

  1. Bridge/mesh AP mode for a wireless backhaul
  2. Sniffer mode for targeted wireless frame capture
  3. Controller-based WLAN with CAPWAP-managed lightweight access points
  4. Monitor mode for RF/security scanning without ordinary client service

Explanation

Correct Answer

C:

A WLC architecture separates management/policy from distributed AP radio access.

Incorrect Answers

A:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for coordinating policy identities across many distributed building APs, the relevant operation is coordinating WLAN policy across many lightweight APs, not connecting network infrastructure over a wireless bridge.

B:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for coordinating policy identities across many distributed building APs, the relevant operation is coordinating WLAN policy across many lightweight APs, not capturing 802.11 frames for a remote packet analysis tool.

D:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for coordinating policy identities across many distributed building APs, the relevant operation is coordinating WLAN policy across many lightweight APs, not monitoring the airspace for rogues and RF/security events.

Question 366

A hospital corridor AP is dedicated to associating standard mobile devices and should not run scanning-only diagnostics. Which operation is appropriate?

  1. Local mode on a lightweight AP
  2. Sniffer mode for targeted wireless frame capture
  3. Monitor mode for RF/security scanning without ordinary client service
  4. Bridge/mesh AP mode for a wireless backhaul

Explanation

Correct Answer

A:

Normal Local mode provides wireless user connectivity.

Incorrect Answers

B:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for the hospital AP that must associate ordinary mobile clients, the relevant operation is serving centrally switched user WLAN traffic, not capturing 802.11 frames for a remote packet analysis tool.

C:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for the hospital AP that must associate ordinary mobile clients, the relevant operation is serving centrally switched user WLAN traffic, not monitoring the airspace for rogues and RF/security events.

D:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for the hospital AP that must associate ordinary mobile clients, the relevant operation is serving centrally switched user WLAN traffic, not connecting network infrastructure over a wireless bridge.

Question 367

A remote retail site wants WAN-independent local WLAN data traffic forwarding, subject to supported design restrictions. What AP mode should be evaluated?

  1. Local mode on a lightweight AP
  2. Sniffer mode for targeted wireless frame capture
  3. FlexConnect local switching where supported
  4. Monitor mode for RF/security scanning without ordinary client service

Explanation

Correct Answer

C:

FlexConnect local switching is used for appropriate managed remote AP branch deployments.

Incorrect Answers

A:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for local branch forwarding despite unreliable WAN connectivity, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not serving centrally switched user WLAN traffic.

B:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for local branch forwarding despite unreliable WAN connectivity, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not capturing 802.11 frames for a remote packet analysis tool.

D:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for local branch forwarding despite unreliable WAN connectivity, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not monitoring the airspace for rogues and RF/security events.

Question 368

Wireless redundancy is needed between two roof switches without a physical cable path; an AP will establish infrastructure-to-infrastructure forwarding. Which operation is suitable?

  1. Local mode on a lightweight AP
  2. Bridge/mesh AP mode for a wireless backhaul
  3. Monitor mode for RF/security scanning without ordinary client service
  4. Sniffer mode for targeted wireless frame capture

Explanation

Correct Answer

B:

Bridge or mesh AP operation can provide wireless backhaul for network segments.

Incorrect Answers

A:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for the roof-to-roof wireless bridge between infrastructure switches, the relevant operation is connecting network infrastructure over a wireless bridge, not serving centrally switched user WLAN traffic.

C:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for the roof-to-roof wireless bridge between infrastructure switches, the relevant operation is connecting network infrastructure over a wireless bridge, not monitoring the airspace for rogues and RF/security events.

D:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for the roof-to-roof wireless bridge between infrastructure switches, the relevant operation is connecting network infrastructure over a wireless bridge, not capturing 802.11 frames for a remote packet analysis tool.

Question 369

A branch FlexConnect AP locally switches three wired client VLANs over one switch uplink. What Layer 2 mode is commonly required on the AP connection?

  1. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs
  2. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network
  3. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  4. Use a supported LAG or port-channel with consistent switch-side configuration

Explanation

Correct Answer

A:

A trunk can carry several tagged client VLANs while preserving each VLAN identity.

Incorrect Answers

B:

A controller must have supported connectivity to its AP management and WLAN service networks; for a FlexConnect AP transporting three tagged local client VLANs, the relevant operation is carrying multiple local client VLANs over one AP Ethernet port, not restoring controller reachability from AP networks.

C:

Some AP designs carry a single untagged management VLAN over an access port; for a FlexConnect AP transporting three tagged local client VLANs, the relevant operation is carrying multiple local client VLANs over one AP Ethernet port, not a single untagged AP management segment.

D:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for a FlexConnect AP transporting three tagged local client VLANs, the relevant operation is carrying multiple local client VLANs over one AP Ethernet port, not one logical LAG across multiple matched physical controller uplinks.

Question 370

A lightweight AP requires only one untagged management VLAN on a switch port; there is no locally switched client VLAN trunk requirement. What port mode may satisfy this design?

  1. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network
  2. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  3. Use a supported LAG or port-channel with consistent switch-side configuration
  4. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs

Explanation

Correct Answer

B:

An access port can deliver the single untagged management VLAN expected by this AP deployment.

Incorrect Answers

A:

A controller must have supported connectivity to its AP management and WLAN service networks; for the single untagged AP management VLAN without local client trunks, the relevant operation is a single untagged AP management segment, not restoring controller reachability from AP networks.

C:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for the single untagged AP management VLAN without local client trunks, the relevant operation is a single untagged AP management segment, not one logical LAG across multiple matched physical controller uplinks.

D:

An AP carrying multiple local switched client VLANs may need an 802.1Q trunk with allowed VLANs; for the single untagged AP management VLAN without local client trunks, the relevant operation is a single untagged AP management segment, not carrying multiple local client VLANs over one AP Ethernet port.