Question 380
A lightweight AP can ping no routed WLC address and has no CAPWAP discovery response; local switch VLAN and power are correct. What network requirement should be fixed?
Explanation
Correct Answer
AP and WLC must have the necessary IP routing connectivity for controller control traffic.
Incorrect Answers
Some AP designs carry a single untagged management VLAN over an access port; for CAPWAP discovery failure despite a valid local VLAN and adequate PoE, the relevant operation is allowing AP/controller control-channel communication across routed networks, not a single untagged AP management segment.
Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for CAPWAP discovery failure despite a valid local VLAN and adequate PoE, the relevant operation is allowing AP/controller control-channel communication across routed networks, not one logical LAG across multiple matched physical controller uplinks.
Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for CAPWAP discovery failure despite a valid local VLAN and adequate PoE, the relevant operation is allowing AP/controller control-channel communication across routed networks, not meeting the AP radio power class rather than just Ethernet data connectivity.