McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 38

Question 370

A lightweight AP requires only one untagged management VLAN on a switch port; there is no locally switched client VLAN trunk requirement. What port mode may satisfy this design?

  1. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network
  2. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  3. Use a supported LAG or port-channel with consistent switch-side configuration
  4. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs

Explanation

Correct Answer

B:

An access port can deliver the single untagged management VLAN expected by this AP deployment.

Incorrect Answers

A:

A controller must have supported connectivity to its AP management and WLAN service networks; for the single untagged AP management VLAN without local client trunks, the relevant operation is a single untagged AP management segment, not restoring controller reachability from AP networks.

C:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for the single untagged AP management VLAN without local client trunks, the relevant operation is a single untagged AP management segment, not one logical LAG across multiple matched physical controller uplinks.

D:

An AP carrying multiple local switched client VLANs may need an 802.1Q trunk with allowed VLANs; for the single untagged AP management VLAN without local client trunks, the relevant operation is a single untagged AP management segment, not carrying multiple local client VLANs over one AP Ethernet port.

Question 371

A wireless controller has no IP reachability to AP management networks although its GUI is accessible from a laptop. Which infrastructure connection should be reviewed?

  1. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network
  2. Use a supported LAG or port-channel with consistent switch-side configuration
  3. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  4. Verify AP PoE requirements against switch PoE budget

Explanation

Correct Answer

A:

The controller needs correct upstream physical/logical network connectivity to route to AP management segments.

Incorrect Answers

B:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for the controller GUI being reachable but AP subnets lacking an IP path, the relevant operation is restoring controller reachability from AP networks, not one logical LAG across multiple matched physical controller uplinks.

C:

Some AP designs carry a single untagged management VLAN over an access port; for the controller GUI being reachable but AP subnets lacking an IP path, the relevant operation is restoring controller reachability from AP networks, not a single untagged AP management segment.

D:

Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for the controller GUI being reachable but AP subnets lacking an IP path, the relevant operation is restoring controller reachability from AP networks, not meeting the AP radio power class rather than just Ethernet data connectivity.

Question 372

A WLC supports bundling four compatible distribution uplinks into one logical connection, and the switch is configured as a port-channel. Which WLC feature is relevant?

  1. Use a supported LAG or port-channel with consistent switch-side configuration
  2. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs
  3. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network
  4. Verify AP PoE requirements against switch PoE budget

Explanation

Correct Answer

A:

Supported link aggregation matches the controller logical uplink to the switch port-channel.

Incorrect Answers

B:

An AP carrying multiple local switched client VLANs may need an 802.1Q trunk with allowed VLANs; for four matched physical WLC uplinks forming a single port-channel, the relevant operation is one logical LAG across multiple matched physical controller uplinks, not carrying multiple local client VLANs over one AP Ethernet port.

C:

A controller must have supported connectivity to its AP management and WLAN service networks; for four matched physical WLC uplinks forming a single port-channel, the relevant operation is one logical LAG across multiple matched physical controller uplinks, not restoring controller reachability from AP networks.

D:

Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for four matched physical WLC uplinks forming a single port-channel, the relevant operation is one logical LAG across multiple matched physical controller uplinks, not meeting the AP radio power class rather than just Ethernet data connectivity.

Question 373

New Wi-Fi 6 AP radios are disabled because their required electrical power class exceeds available power on the switch. What infrastructure check resolves the issue?

  1. Verify AP PoE requirements against switch PoE budget
  2. Use a supported LAG or port-channel with consistent switch-side configuration
  3. Verify routed IP reachability between AP and WLC for CAPWAP control
  4. Configure an access VLAN on the AP uplink for its intended untagged management-only path

Explanation

Correct Answer

A:

Insufficient PoE allocation can limit AP boot and radio features independently of management reachability.

Incorrect Answers

B:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for disabled Wi-Fi 6 radios due to insufficient supplied electrical power, the relevant operation is meeting the AP radio power class rather than just Ethernet data connectivity, not one logical LAG across multiple matched physical controller uplinks.

C:

Controller-based AP discovery and control require working IP transport between AP and controller; for disabled Wi-Fi 6 radios due to insufficient supplied electrical power, the relevant operation is meeting the AP radio power class rather than just Ethernet data connectivity, not allowing AP/controller control-channel communication across routed networks.

D:

Some AP designs carry a single untagged management VLAN over an access port; for disabled Wi-Fi 6 radios due to insufficient supplied electrical power, the relevant operation is meeting the AP radio power class rather than just Ethernet data connectivity, not a single untagged AP management segment.

Question 374

An access point receives DHCP but never joins its WLC across a routed network and traceroute shows no path. What prerequisite must be repaired?

  1. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs
  2. Verify routed IP reachability between AP and WLC for CAPWAP control
  3. Verify AP PoE requirements against switch PoE budget
  4. Use a supported LAG or port-channel with consistent switch-side configuration

Explanation

Correct Answer

B:

IP reachability is required for the AP to discover and establish a control connection to the WLC.

Incorrect Answers

A:

An AP carrying multiple local switched client VLANs may need an 802.1Q trunk with allowed VLANs; for an AP with DHCP but no routed path to its controller, the relevant operation is allowing AP/controller control-channel communication across routed networks, not carrying multiple local client VLANs over one AP Ethernet port.

C:

Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for an AP with DHCP but no routed path to its controller, the relevant operation is allowing AP/controller control-channel communication across routed networks, not meeting the AP radio power class rather than just Ethernet data connectivity.

D:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for an AP with DHCP but no routed path to its controller, the relevant operation is allowing AP/controller control-channel communication across routed networks, not one logical LAG across multiple matched physical controller uplinks.

Question 375

A remotely switched WLAN sends traffic for multiple VLANs from one AP Ethernet interface, and all client segments must retain separate broadcast domains. Which uplink is appropriate?

  1. Verify AP PoE requirements against switch PoE budget
  2. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  3. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs
  4. Verify routed IP reachability between AP and WLC for CAPWAP control

Explanation

Correct Answer

C:

802.1Q trunking can carry multiple tagged client VLANs over one AP uplink.

Incorrect Answers

A:

Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for retaining three isolated client broadcast domains on one AP Ethernet uplink, the relevant operation is carrying multiple local client VLANs over one AP Ethernet port, not meeting the AP radio power class rather than just Ethernet data connectivity.

B:

Some AP designs carry a single untagged management VLAN over an access port; for retaining three isolated client broadcast domains on one AP Ethernet uplink, the relevant operation is carrying multiple local client VLANs over one AP Ethernet port, not a single untagged AP management segment.

D:

Controller-based AP discovery and control require working IP transport between AP and controller; for retaining three isolated client broadcast domains on one AP Ethernet uplink, the relevant operation is carrying multiple local client VLANs over one AP Ethernet port, not allowing AP/controller control-channel communication across routed networks.

Question 376

An AP management interface expects untagged VLAN 30 and will not locally switch any second VLAN. Which switchport design is plausible?

  1. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs
  2. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network
  3. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  4. Use a supported LAG or port-channel with consistent switch-side configuration

Explanation

Correct Answer

C:

A single-VLAN access port can provide the intended untagged management path.

Incorrect Answers

A:

An AP carrying multiple local switched client VLANs may need an 802.1Q trunk with allowed VLANs; for an untagged AP management interface limited to VLAN 30, the relevant operation is a single untagged AP management segment, not carrying multiple local client VLANs over one AP Ethernet port.

B:

A controller must have supported connectivity to its AP management and WLAN service networks; for an untagged AP management interface limited to VLAN 30, the relevant operation is a single untagged AP management segment, not restoring controller reachability from AP networks.

D:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for an untagged AP management interface limited to VLAN 30, the relevant operation is a single untagged AP management segment, not one logical LAG across multiple matched physical controller uplinks.

Question 377

A controller becomes unreachable from all AP management subnets after the upstream switch route is removed. What topology component must be corrected?

  1. Use a supported LAG or port-channel with consistent switch-side configuration
  2. Verify AP PoE requirements against switch PoE budget
  3. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  4. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network

Explanation

Correct Answer

D:

WLC routing/uplink reachability is fundamental to centralized AP management.

Incorrect Answers

A:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for controller reachability lost when an upstream route disappears, the relevant operation is restoring controller reachability from AP networks, not one logical LAG across multiple matched physical controller uplinks.

B:

Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for controller reachability lost when an upstream route disappears, the relevant operation is restoring controller reachability from AP networks, not meeting the AP radio power class rather than just Ethernet data connectivity.

C:

Some AP designs carry a single untagged management VLAN over an access port; for controller reachability lost when an upstream route disappears, the relevant operation is restoring controller reachability from AP networks, not a single untagged AP management segment.

Question 378

A controller-facing bundle is configured with mismatched EtherChannel settings and half of the physical links suspend. Which design feature should be made consistent?

  1. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  2. Verify AP PoE requirements against switch PoE budget
  3. Use a supported LAG or port-channel with consistent switch-side configuration
  4. Verify routed IP reachability between AP and WLC for CAPWAP control

Explanation

Correct Answer

C:

LAG requires compatible aggregation settings across WLC and switch endpoints.

Incorrect Answers

A:

Some AP designs carry a single untagged management VLAN over an access port; for suspended controller bundle members caused by incompatible channel settings, the relevant operation is one logical LAG across multiple matched physical controller uplinks, not a single untagged AP management segment.

B:

Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for suspended controller bundle members caused by incompatible channel settings, the relevant operation is one logical LAG across multiple matched physical controller uplinks, not meeting the AP radio power class rather than just Ethernet data connectivity.

D:

Controller-based AP discovery and control require working IP transport between AP and controller; for suspended controller bundle members caused by incompatible channel settings, the relevant operation is one logical LAG across multiple matched physical controller uplinks, not allowing AP/controller control-channel communication across routed networks.

Question 379

The cabling report passes but several APs reboot when radios enter full power mode; switch logging reports PoE overload. Which infrastructure check is appropriate?

  1. Configure an 802.1Q trunk on the AP uplink for multiple locally switched VLANs
  2. Verify routed IP reachability between AP and WLC for CAPWAP control
  3. Connect the WLC data/uplink to the appropriate VLAN trunk or routed network
  4. Verify AP PoE requirements against switch PoE budget

Explanation

Correct Answer

D:

The budget and negotiated PoE class must satisfy actual AP requirements.

Incorrect Answers

A:

An AP carrying multiple local switched client VLANs may need an 802.1Q trunk with allowed VLANs; for AP resets coinciding with switch PoE overload warnings, the relevant operation is meeting the AP radio power class rather than just Ethernet data connectivity, not carrying multiple local client VLANs over one AP Ethernet port.

B:

Controller-based AP discovery and control require working IP transport between AP and controller; for AP resets coinciding with switch PoE overload warnings, the relevant operation is meeting the AP radio power class rather than just Ethernet data connectivity, not allowing AP/controller control-channel communication across routed networks.

C:

A controller must have supported connectivity to its AP management and WLAN service networks; for AP resets coinciding with switch PoE overload warnings, the relevant operation is meeting the AP radio power class rather than just Ethernet data connectivity, not restoring controller reachability from AP networks.

Question 380

A lightweight AP can ping no routed WLC address and has no CAPWAP discovery response; local switch VLAN and power are correct. What network requirement should be fixed?

  1. Configure an access VLAN on the AP uplink for its intended untagged management-only path
  2. Verify routed IP reachability between AP and WLC for CAPWAP control
  3. Use a supported LAG or port-channel with consistent switch-side configuration
  4. Verify AP PoE requirements against switch PoE budget

Explanation

Correct Answer

B:

AP and WLC must have the necessary IP routing connectivity for controller control traffic.

Incorrect Answers

A:

Some AP designs carry a single untagged management VLAN over an access port; for CAPWAP discovery failure despite a valid local VLAN and adequate PoE, the relevant operation is allowing AP/controller control-channel communication across routed networks, not a single untagged AP management segment.

C:

Controller LAG bundles multiple compatible links into a single logical uplink when the platform supports it; for CAPWAP discovery failure despite a valid local VLAN and adequate PoE, the relevant operation is allowing AP/controller control-channel communication across routed networks, not one logical LAG across multiple matched physical controller uplinks.

D:

Power-over-Ethernet class and switch power budget influence AP boot and radio operation; for CAPWAP discovery failure despite a valid local VLAN and adequate PoE, the relevant operation is allowing AP/controller control-channel communication across routed networks, not meeting the AP radio power class rather than just Ethernet data connectivity.