McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 36

Question 350

Four parallel links form a healthy Layer 2 EtherChannel between two switches. For STP path selection, how should the bundle be represented?

  1. As a routed OSPF network instead of a Layer 2 bundle.
  2. As four unrelated VLANs with separate bridge IDs.
  3. As one logical Port-channel spanning-tree interface.
  4. As four independent forwarding ports that STP must all disable.

Explanation

Correct Answer

C:

STP treats an EtherChannel bundle as a single logical port for its role and state decisions.

Incorrect Answers

A:

L2 EtherChannel is still bridged; it is not automatically OSPF routed.

B:

Aggregation does not redefine VLANs or create separate root elections per physical member.

D:

A healthy port channel is aggregated, so STP does not independently block each physical member as four separate links.

Question 351

A single desktop NIC attaches to an access port and needs immediate forwarding after link-up. The port is not a switch uplink. Which setting is appropriate?

  1. spanning-tree portfast on the access interface
  2. spanning-tree rootguard on the desktop as the only speed setting
  3. Disable spanning tree globally across all VLANs
  4. spanning-tree loopguard default with no PortFast

Explanation

Correct Answer

A:

PortFast speeds an edge host port into forwarding while normal BPDU protections can remain enabled.

Incorrect Answers

B:

Root Guard prevents superior root claims; it is not the host-facing fast-convergence feature.

C:

Disabling STP discards important loop protection and is unnecessary for edge startup speed.

D:

Loop Guard is not the normal edge-host startup acceleration mechanism.

Question 352

After an upstream switch with STP bridge priority 24576 fails, a new switch with bridge priority 4096 joins the same VLAN topology. No guard blocks its BPDUs. What is the likely root-bridge outcome after convergence?

  1. A higher bridge priority value is always preferred.
  2. The prior root must remain root forever because it was elected first.
  3. The newly joined lower-BID switch can become root after STP reconverges.
  4. The network must convert to OSPF to select a new root.

Explanation

Correct Answer

C:

STP continuously compares bridge IDs; a newly visible lower bridge ID can cause a new root election and convergence.

Incorrect Answers

A:

STP prefers numerically lower, not higher, bridge priorities.

B:

STP root election is dynamic and not immutable after initial convergence.

D:

Root bridge election occurs within STP without OSPF.

Question 353

An RSTP topology change causes switches to invalidate learned MAC entries outside the affected edge path. Why do they refresh this forwarding information?

  1. To erase all VLAN configuration permanently.
  2. To replace IPv4 default routes in the routing table.
  3. To encrypt the MAC addresses for management traffic.
  4. To avoid forwarding frames toward stale MAC locations after paths change.

Explanation

Correct Answer

D:

Topology changes can move reachable destinations to new ports; stale learned MAC entries would send frames in the wrong direction.

Incorrect Answers

A:

MAC table aging does not delete switch VLAN definitions.

B:

Routing table default routes are distinct from bridging MAC learning.

C:

MAC table refresh is about reachability, not encryption.

Question 354

A centrally managed lightweight AP primarily serves user clients in an enterprise WLAN with a controller tunnel. Which AP mode best matches the role?

  1. Monitor mode for RF/security scanning without ordinary client service
  2. Bridge/mesh AP mode for a wireless backhaul
  3. Sniffer mode for targeted wireless frame capture
  4. Local mode on a lightweight AP

Explanation

Correct Answer

D:

Local mode provides the normal client-serving behavior in a controller-based deployment.

Incorrect Answers

A:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for a lightweight AP serving clients through a controller tunnel, the relevant operation is serving centrally switched user WLAN traffic, not monitoring the airspace for rogues and RF/security events.

B:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for a lightweight AP serving clients through a controller tunnel, the relevant operation is serving centrally switched user WLAN traffic, not connecting network infrastructure over a wireless bridge.

C:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for a lightweight AP serving clients through a controller tunnel, the relevant operation is serving centrally switched user WLAN traffic, not capturing 802.11 frames for a remote packet analysis tool.

Question 355

A remote branch must keep local user-data switching operational while its APs are managed by a central controller across the WAN. What architecture should be considered?

  1. FlexConnect local switching where supported
  2. Local mode on a lightweight AP
  3. Sniffer mode for targeted wireless frame capture
  4. Monitor mode for RF/security scanning without ordinary client service

Explanation

Correct Answer

A:

FlexConnect local switching reduces remote-branch data-path dependence on a central controller.

Incorrect Answers

B:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for the remote branch demanding local data switching across a WAN failure, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not serving centrally switched user WLAN traffic.

C:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for the remote branch demanding local data switching across a WAN failure, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not capturing 802.11 frames for a remote packet analysis tool.

D:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for the remote branch demanding local data switching across a WAN failure, the relevant operation is local client forwarding when WAN/controller communication is disrupted, not monitoring the airspace for rogues and RF/security events.

Question 356

Two outdoor buildings need a wireless point-to-point infrastructure bridge without laying new fiber. Which AP capability is relevant?

  1. Bridge/mesh AP mode for a wireless backhaul
  2. Monitor mode for RF/security scanning without ordinary client service
  3. FlexConnect local switching where supported
  4. Local mode on a lightweight AP

Explanation

Correct Answer

A:

Mesh/bridge operation allows appropriate APs to connect network segments over a wireless backhaul.

Incorrect Answers

B:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for the two outdoor buildings connected over wireless infrastructure backhaul, the relevant operation is connecting network infrastructure over a wireless bridge, not monitoring the airspace for rogues and RF/security events.

C:

FlexConnect can switch supported client VLAN traffic locally at remote branches under controller-based management; for the two outdoor buildings connected over wireless infrastructure backhaul, the relevant operation is connecting network infrastructure over a wireless bridge, not local client forwarding when WAN/controller communication is disrupted.

D:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for the two outdoor buildings connected over wireless infrastructure backhaul, the relevant operation is connecting network infrastructure over a wireless bridge, not serving centrally switched user WLAN traffic.

Question 357

A security team needs a radio to scan channels continuously and report rogue 802.11 devices, not serve user laptops. Which AP mode fits?

  1. Monitor mode for RF/security scanning without ordinary client service
  2. FlexConnect local switching where supported
  3. Bridge/mesh AP mode for a wireless backhaul
  4. Local mode on a lightweight AP

Explanation

Correct Answer

A:

Monitor mode dedicates AP radio time to RF observation and intrusion monitoring.

Incorrect Answers

B:

FlexConnect can switch supported client VLAN traffic locally at remote branches under controller-based management; for continuous rogue transmitter scanning without client association, the relevant operation is monitoring the airspace for rogues and RF/security events, not local client forwarding when WAN/controller communication is disrupted.

C:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for continuous rogue transmitter scanning without client association, the relevant operation is monitoring the airspace for rogues and RF/security events, not connecting network infrastructure over a wireless bridge.

D:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for continuous rogue transmitter scanning without client association, the relevant operation is monitoring the airspace for rogues and RF/security events, not serving centrally switched user WLAN traffic.

Question 358

An engineer needs raw wireless frames sent to a packet-analysis workstation from a dedicated AP radio. Which diagnostic mode should be used?

  1. Monitor mode for RF/security scanning without ordinary client service
  2. FlexConnect local switching where supported
  3. Local mode on a lightweight AP
  4. Sniffer mode for targeted wireless frame capture

Explanation

Correct Answer

D:

Sniffer mode forwards wireless captures for detailed packet analysis.

Incorrect Answers

A:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for sending raw management frames to a diagnostic packet analyzer, the relevant operation is capturing 802.11 frames for a remote packet analysis tool, not monitoring the airspace for rogues and RF/security events.

B:

FlexConnect can switch supported client VLAN traffic locally at remote branches under controller-based management; for sending raw management frames to a diagnostic packet analyzer, the relevant operation is capturing 802.11 frames for a remote packet analysis tool, not local client forwarding when WAN/controller communication is disrupted.

C:

Local mode provides client access with a managed controller path for CAPWAP control and often centralized switching; for sending raw management frames to a diagnostic packet analyzer, the relevant operation is capturing 802.11 frames for a remote packet analysis tool, not serving centrally switched user WLAN traffic.

Question 359

The campus operates 60 lightweight APs that must receive consistent WLAN policy updates from a central management plane. What wireless architecture supports this?

  1. Controller-based WLAN with CAPWAP-managed lightweight access points
  2. Sniffer mode for targeted wireless frame capture
  3. Monitor mode for RF/security scanning without ordinary client service
  4. Bridge/mesh AP mode for a wireless backhaul

Explanation

Correct Answer

A:

Controller-based wireless provides centralized configuration and policy for managed APs.

Incorrect Answers

B:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for centrally provisioning consistent policy across sixty lightweight APs, the relevant operation is coordinating WLAN policy across many lightweight APs, not capturing 802.11 frames for a remote packet analysis tool.

C:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for centrally provisioning consistent policy across sixty lightweight APs, the relevant operation is coordinating WLAN policy across many lightweight APs, not monitoring the airspace for rogues and RF/security events.

D:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for centrally provisioning consistent policy across sixty lightweight APs, the relevant operation is coordinating WLAN policy across many lightweight APs, not connecting network infrastructure over a wireless bridge.

Question 360

A controller-managed AP broadcasts standard secure SSIDs and associates users on the office floor. Which AP operating mode is typical?

  1. Monitor mode for RF/security scanning without ordinary client service
  2. Local mode on a lightweight AP
  3. Bridge/mesh AP mode for a wireless backhaul
  4. Sniffer mode for targeted wireless frame capture

Explanation

Correct Answer

B:

Client association and traffic servicing is the central purpose of Local AP mode.

Incorrect Answers

A:

Monitor mode dedicates radio resources to observing RF and security events rather than standard client access; for associating production office WLAN users under controller management, the relevant operation is serving centrally switched user WLAN traffic, not monitoring the airspace for rogues and RF/security events.

C:

Mesh/bridge AP modes support wireless infrastructure backhaul between network segments; for associating production office WLAN users under controller management, the relevant operation is serving centrally switched user WLAN traffic, not connecting network infrastructure over a wireless bridge.

D:

Sniffer mode sends radio captures to an analyzer for packet-level troubleshooting; for associating production office WLAN users under controller management, the relevant operation is serving centrally switched user WLAN traffic, not capturing 802.11 frames for a remote packet analysis tool.