McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 34

Question 330

A workstation-only access port has PortFast and globally enabled BPDU Guard. Someone connects an unmanaged switch that sends an STP BPDU. What should happen by default?

  1. The access port becomes the root bridge immediately.
  2. The edge interface becomes err-disabled to prevent an unauthorized L2 bridge.
  3. The switch enables a second redundant forwarding interface automatically.
  4. The incoming BPDU is routed by the default gateway.

Explanation

Correct Answer

B:

BPDU Guard disables PortFast edge ports receiving BPDUs, protecting against accidental or hostile bridging.

Incorrect Answers

A:

Root election cannot be asserted by merely receiving a BPDU on one access interface.

C:

The protection intentionally shuts down the suspect edge port rather than creating redundancy.

D:

BPDUs are Layer 2 STP control messages and are not routed at the default gateway.

Question 331

An operator moves a trunk from Gi0/3 to Gi0/4 and needs to confirm the new interface is forwarding or alternate for VLAN 200. Which output is most directly useful?

  1. show cdp neighbors detail on a third interface
  2. show spanning-tree vlan 200 interface Gi0/4 detail
  3. show vlan brief without inspecting STP
  4. show ip nat statistics

Explanation

Correct Answer

B:

The detailed per-VLAN interface output reports port role and operational STP state.

Incorrect Answers

A:

CDP identification alone does not establish STP forwarding state on Gi0/4.

C:

A VLAN database listing does not identify whether the interface is forwarding or alternate.

D:

NAT counters cannot reveal per-VLAN spanning-tree port role.

Question 332

A designated uplink protected by root guard enters root-inconsistent after a downstream switch advertises a superior BID. The downstream configuration is fixed and superior BPDUs stop. What recovery is expected?

  1. The uplink necessarily stays in err-disabled status until an interface shutdown/no shutdown.
  2. Root guard permanently changes VLAN IDs when activated.
  3. The whole switch must be factory reset before recovery.
  4. The protected port can automatically leave root-inconsistent and resume its normal STP role.

Explanation

Correct Answer

D:

Root guard keeps the port nonforwarding while unexpected superior BPDUs are present, then automatically restores normal state once they cease.

Incorrect Answers

A:

Err-disable is associated with safeguards such as BPDU Guard, not normal root-inconsistent recovery.

B:

Root guard restricts topology selection; it does not renumber VLANs.

C:

A factory reset is unnecessary for transient root guard inconsistency.

Question 333

A non-designated STP port stops receiving BPDUs due to a unidirectional fiber failure. Engineers want to prevent it from erroneously moving to forwarding. What safeguard is suitable?

  1. Use an ACL that blocks ICMP echo requests.
  2. Enable PortFast on the interswitch port.
  3. Enable loop guard on appropriate non-designated interswitch ports.
  4. Disable STP across all redundant distribution links.

Explanation

Correct Answer

C:

Loop guard can hold a port in loop-inconsistent state when expected BPDUs disappear, reducing redundant-loop risk.

Incorrect Answers

A:

ICMP ACLs do not process STP BPDUs or stop Layer 2 bridging loops.

B:

PortFast is an edge optimization and should not be used to bypass control on redundant switch links.

D:

Disabling STP removes loop protection from a redundant Layer 2 topology.

Question 334

On the selected root switch for VLAN 40, two active forwarding links connect to distinct downstream switches. Which STP port role should these two root-switch links normally have?

  1. One link is automatically disabled by BPDU Guard.
  2. Both links must be alternate ports in discarding.
  3. Both links are root ports on the root bridge.
  4. Both links act as designated ports for their respective segments.

Explanation

Correct Answer

D:

The root bridge has zero root ports; its active segment-facing links are designated ports unless another safeguard intervenes.

Incorrect Answers

A:

BPDU Guard is not automatically implied on normal switch-to-switch root links.

B:

Alternate links are redundant non-designated candidates, not the root switch default.

C:

Root ports belong on nonroot switches pointing toward the root, not on the root bridge.

Question 335

A distribution switch loses its current root-port link while another valid port has an alternate role and receives root BPDUs. What is the purpose of that alternate port?

  1. Advertise a smaller router OSPF metric to replace STP.
  2. Become the permanent broadcast storm source for the VLAN.
  3. Offer a precomputed backup path that can transition toward root-port forwarding.
  4. Change its VLAN tag to VLAN 1 and bypass convergence.

Explanation

Correct Answer

C:

RSTP retains alternate paths as backup candidates for quick recovery after the preferred root path fails.

Incorrect Answers

A:

OSPF metrics are Layer 3 routing attributes, not the Layer 2 STP transition method.

B:

A redundant path is held to avoid loops, not to create them.

D:

VLAN tag rewriting is not the mechanism for RSTP role transition.

Question 336

A blocked redundant link suddenly stops receiving expected BPDUs because of a unidirectional fiber issue. The design must prevent it from incorrectly becoming designated and forwarding. What protection helps?

  1. DHCP snooping trust
  2. NTP authentication
  3. PortFast on the blocked transit link
  4. Loop Guard

Explanation

Correct Answer

D:

Loop Guard can hold a non-designated port loop-inconsistent when its expected BPDUs disappear.

Incorrect Answers

A:

DHCP snooping secures DHCP server messages, not spanning-tree BPDU disappearance.

B:

Clock synchronization cannot protect against unidirectional STP topology loops.

C:

PortFast would bypass normal edge convergence and is inappropriate for a switch transit port.

Question 337

A switch administrator applies PortFast to a physical trunk that actually connects another switch in a redundant triangle. Why is this unsafe?

  1. PortFast replaces the need for all root bridge configuration.
  2. PortFast can place the link into forwarding before normal STP convergence and expose a transient loop.
  3. PortFast forces the switch to become the OSPF DR.
  4. PortFast always provides extra tagged VLAN capacity on the uplink.

Explanation

Correct Answer

B:

PortFast should target verified edge attachments; an interswitch redundant path must participate in loop avoidance.

Incorrect Answers

A:

PortFast does not supersede STP root selection or other safeguards.

C:

OSPF designated-router election is separate from spanning-tree operation.

D:

VLAN capacity is controlled by trunk settings, not PortFast.

Question 338

An interface in RSTP LEARNING state has not yet reached FORWARDING. Which activity is possible?

  1. It ignores all received BPDUs until the timer expires.
  2. It forwards user data but never updates the MAC table.
  3. It can learn source MAC addresses while still not forwarding user frames.
  4. It has become the root bridge for every VLAN.

Explanation

Correct Answer

C:

Learning updates the bridge MAC table ahead of forwarding while withholding normal data forwarding.

Incorrect Answers

A:

RSTP receives and processes STP BPDUs while converging.

B:

The stated actions reverse the actual learning versus forwarding distinction.

D:

A port state does not make the switch root across VLAN instances.

Question 339

A technician wants SW-CORE to be preferred root for VLAN 71 and proposes bridge priority 5000. Which priority value is accepted as a standard configured Cisco priority increment?

  1. 4095
  2. 4500
  3. 5000
  4. 4096

Explanation

Correct Answer

D:

Cisco bridge priority is set in multiples of 4096; 4096 is a valid low configurable value.

Incorrect Answers

A:

4095 is below a valid bridge-priority increment and not accepted as a standard configured value.

B:

4500 is not an allowed 4096 increment.

C:

5000 is not a multiple of 4096 and is not a valid bridge-priority step.

Question 340

A campus wants SW-A root for VLAN 10 and SW-B root for VLAN 20 to distribute uplink forwarding. Which spanning-tree design fits Rapid PVST+?

  1. Change the first-hop gateway address to determine every VLAN root.
  2. Use one common bridge priority for all VLANs and expect automatic alternating roots.
  3. Disable spanning tree on one VLAN to force load balancing.
  4. Assign a lower bridge priority to SW-A for VLAN 10 and to SW-B for VLAN 20.

Explanation

Correct Answer

D:

Rapid PVST+ has separate STP instances per VLAN, allowing intentional root bridge placement by VLAN-specific priority.

Incorrect Answers

A:

First-hop IP gateway selection is separate from the Layer 2 root bridge election.

B:

Equal priorities do not guarantee alternating winners and may lead to MAC-based roots.

C:

Disabling STP exposes redundant Layer 2 paths to loops rather than managing load.