McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 33

Question 320

An office access port in VLAN 70 at a municipal library should connect only to a laptop. If someone attaches a small unmanaged switch that sends spanning-tree BPDUs, the port must shut down. Which feature is appropriate?

  1. Enable only root guard so an unexpected switch cannot transmit any BPDU
  2. Configure a lower STP priority on the unauthorized access device
  3. Enable BPDU Guard on the intended PortFast edge port
  4. Disable all BPDUs at every switch interconnect

Explanation

Correct Answer

C:

BPDU Guard moves an edge port into an error-disabled state when it unexpectedly receives a BPDU.

Incorrect Answers

A:

Root guard prevents superior-root influence; it does not directly apply BPDU Guard edge-violation behavior.

B:

Lowering an unauthorized switch bridge priority could worsen the unauthorized topology influence.

D:

Disabling BPDU processing can conceal, rather than prevent, an access-layer bridging loop.

Question 321

A campus distribution switch at a hospitality property must protect its designed VLAN 87 root placement when an access switch advertises a superior STP bridge ID. What guard is appropriate on the downstream-facing designated interface?

  1. Disable STP on the distribution switch
  2. Enable PortFast on that redundant switch uplink
  3. Use BPDU filter on every network core port
  4. Enable root guard on the designated port where an unexpected superior BPDU must be rejected

Explanation

Correct Answer

D:

Root guard prevents a downstream device from becoming root through a protected designated port by placing it into root-inconsistent state when superior BPDUs arrive.

Incorrect Answers

A:

Removing STP cannot protect against a Layer 2 loop or root takeover.

B:

PortFast is an edge forwarding optimization and not root-election enforcement on an interswitch link.

C:

Filtering all BPDUs on core interconnects may hide critical topology events.

Question 322

A redundant uplink at a remote field office can stop receiving BPDUs because of a unidirectional fault. The design requires preventing an unsafe forwarding state. Which STP feature best addresses this?

  1. Configure loop guard where a nondesignated port must not become forwarding after BPDUs unexpectedly stop
  2. Disable the spanning-tree instance on the access ring
  3. Configure a new VLAN ID and ignore lost BPDUs
  4. Configure PortFast on the affected root-facing uplink

Explanation

Correct Answer

A:

Loop guard protects a root/alternate path against an unsafe transition to designated forwarding when BPDUs cease unexpectedly.

Incorrect Answers

B:

Disabling STP removes rather than adds topology protection.

C:

Renumbering a VLAN does not resolve a unidirectional BPDU-loss condition.

D:

PortFast is for genuine edge hosts, not redundant link loss of BPDUs.

Question 323

Rapid PVST+ marks a redundant port in VLAN 121 as discarding. What operational behavior should the technician expect for normal user traffic?

  1. Assume discarding prevents all receipt of control protocol BPDUs
  2. Treat discarding as the state that forwards all known unicast traffic
  3. Treat discarding as the state that floods all user data
  4. Treat discarding as a state that does not forward user frames

Explanation

Correct Answer

D:

Rapid STP discarding ports do not forward data frames, but can still process spanning-tree control information.

Incorrect Answers

A:

Spanning-tree BPDUs can still be used to maintain the blocked topology.

B:

A discarding port must not forward known unicast data.

C:

Discarding specifically suppresses ordinary user-data forwarding. An STP discarding port suppresses data traffic specifically to prevent a potential Layer 2 loop.

Question 324

An engineer analyzes Rapid PVST+ VLAN 138 and asks which bridge interface supplies the best path toward the root for a shared downstream LAN segment. What does the designated port do?

  1. Expect a designated port on the segment to forward traffic toward downstream bridge or host networks
  2. Expect a designated port to ignore the spanning-tree instance and flood all frames
  3. Expect a designated port to be exclusively a root port on non-root bridges
  4. Expect a designated port to always be administratively shutdown

Explanation

Correct Answer

A:

For a given STP segment the designated port advertises the best root path and ordinarily forwards on that segment.

Incorrect Answers

B:

STP designated ports are still governed by states and VLAN-specific topology.

C:

Root and designated are distinct roles; a bridge can have designated ports without being the root.

D:

Designated is an STP port role, not an administrative shutdown command.

Question 325

In VLAN 155 at a retail store, one access switch has an alternate STP uplink. Its root-facing forwarding link fails. What should Rapid PVST+ do with the alternate path?

  1. Set every redundant uplink to PortFast and ignore topology changes
  2. Require a router restart before any Layer 2 alternate can forward
  3. Assume the alternate remains blocked forever even when no other path survives
  4. Wait for the alternate path to be promoted when Rapid STP detects failure of the current forwarding path

Explanation

Correct Answer

D:

Rapid STP can rapidly transition an alternate port into forwarding to preserve connectivity after a topology failure.

Incorrect Answers

A:

PortFast on interswitch redundant uplinks defeats the intended topology handling.

B:

STP transitions are Layer 2 and do not require a router reboot.

C:

An alternate path exists precisely to provide redundancy when the selected forwarding path fails.

Question 326

A switch has two local ports attached to the same shared segment, and the less-preferred local port serves as a redundant path for the designated port. Which RSTP role describes that local redundant port?

  1. Alternate port
  2. Root port
  3. Backup port
  4. Disabled port

Explanation

Correct Answer

C:

Backup provides a redundant path on the same shared link to a segment on which the switch is designated.

Incorrect Answers

A:

Alternate provides an alternative path to the root via another bridge, not a same-segment backup of a local designated port.

B:

A root port is the chosen best port toward the root bridge.

D:

A backup port has a specific RSTP redundancy role rather than being administratively disabled.

Question 327

SW-A and SW-B are in Rapid PVST+ VLAN 25. SW-A has configured bridge priority 8192, while SW-B has configured bridge priority 4096. SW-B displays bridge priority 4121 in its VLAN 25 bridge identifier. Why does the displayed value include 25?

  1. The added 25 is the OSPF metric for VLAN 25.
  2. All Layer 2 switch priorities automatically become 32768 after election.
  3. The displayed bridge ID is only the switch MAC address with no priority field.
  4. The extended system ID adds the VLAN number to the configured bridge priority for this per-VLAN instance.

Explanation

Correct Answer

D:

For VLAN 25, the extended system ID contributes 25 to SW-B’s configured 4096 priority, explaining the displayed 4121 value.

Incorrect Answers

A:

OSPF is a Layer 3 routing protocol and does not supply the extended system ID in an STP bridge priority.

B:

The configured STP priority remains the bridge-priority base; it is not reset to 32768 during election.

C:

A bridge identifier combines a priority/system-ID component and a MAC component; it is not just a MAC address.

Question 328

SW-C receives BPDUs from the same root with advertised root costs 8 and 12 on its two 1-Gbps ports. Each receiving port contributes cost 4. Which port becomes its root port?

  1. Both ports forward as root ports simultaneously.
  2. The port receiving cost 12, with total cost 16.
  3. Whichever port has the highest port number regardless of cost.
  4. The port receiving the cost-8 BPDU, with total cost 12.

Explanation

Correct Answer

D:

Root path selection compares cumulative cost, adding the local port cost to each advertised root path cost.

Incorrect Answers

A:

An STP bridge normally selects one root port per spanning-tree instance.

B:

The alternative total cost is 16 and loses to 12.

C:

Port identifiers only break ties after better root path cost comparisons.

Question 329

A Rapid PVST+ alternate port shows DISCARDING. What user-frame behavior should the operator expect until the topology changes?

  1. It is elected as a second simultaneous root port.
  2. It forwards and learns while discarding BPDUs.
  3. It does not forward data frames or learn new source MACs in the discarding state.
  4. It forwards only unicast traffic and learns MAC addresses.

Explanation

Correct Answer

C:

RSTP combines blocking and listening into discarding, where normal user-data forwarding and source-MAC learning are disabled.

Incorrect Answers

A:

Alternate is a standby role, not a second active root-port forwarding path.

B:

RSTP continues processing control BPDUs in discarding; it does not forward ordinary data.

D:

Unicast is also normal data and does not bypass discarding.

Question 330

A workstation-only access port has PortFast and globally enabled BPDU Guard. Someone connects an unmanaged switch that sends an STP BPDU. What should happen by default?

  1. The access port becomes the root bridge immediately.
  2. The edge interface becomes err-disabled to prevent an unauthorized L2 bridge.
  3. The switch enables a second redundant forwarding interface automatically.
  4. The incoming BPDU is routed by the default gateway.

Explanation

Correct Answer

B:

BPDU Guard disables PortFast edge ports receiving BPDUs, protecting against accidental or hostile bridging.

Incorrect Answers

A:

Root election cannot be asserted by merely receiving a BPDU on one access interface.

C:

The protection intentionally shuts down the suspect edge port rather than creating redundancy.

D:

BPDUs are Layer 2 STP control messages and are not routed at the default gateway.