McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 32

Question 310

A four-member EtherChannel load-balances using only the destination IP. Hundreds of different clients connect to one busy backup server IP and consistently overload one member while the others are idle. On a switch supporting alternative hash inputs, which change can spread distinct client flows more effectively?

  1. Use a supported source-and-destination IP hash and verify the distribution across the actual client addresses.
  2. Disable all three spare members so aggregate capacity equals a single link.
  3. Force the switch to round-robin individual packets of the same TCP session across all member links.
  4. Configure a different STP root bridge on every packet sent to that server.

Explanation

Correct Answer

A:

With destination-only hashing, all sessions to the same server share one hash input; incorporating variable client source IPs can distribute those distinct flows among members, although balance is not guaranteed.

Incorrect Answers

B:

Disabling healthy members reduces resilience and capacity rather than improving distribution across the existing bundle.

C:

Per-packet striping of one TCP session is not the normal EtherChannel flow-hashing behavior and risks packet reordering.

D:

Spanning-tree bridge elections do not select an EtherChannel member for each unicast packet; the member-selection hash does.

Question 311

The local interfaces use `channel-group 2 mode on`, but the remote uses `channel-group 2 mode active`. The bundled link is unstable. Which correction ensures active protocol negotiation on both ends?

  1. Replace LACP with trunk native VLAN 2 on both ends.
  2. Keep `mode on` locally and set the remote to `passive` only.
  3. Set the local port to `channel-group 2 mode auto` to use LACP.
  4. Change the local members to `channel-group 2 mode active` and verify consistent peer settings.

Explanation

Correct Answer

D:

Static on does not negotiate LACP; active/active on both ends provides compatible LACP negotiation.

Incorrect Answers

A:

Native VLAN changes do not repair differing channel negotiation protocols.

B:

Passive LACP on the peer still cannot negotiate with a static on port.

C:

Auto is PAgP-specific and does not request LACP.

Question 312

On a Catalyst switch supporting `port-channel min-links`, Port-channel8 has `port-channel min-links 3` configured. After one member fails, only two links remain up and bundled, so the Port-channel goes down. The service requires the three-link minimum for capacity. What should be done?

  1. Force `channel-group 8 mode on` on just one switch and leave the three-link service policy unmet.
  2. Restore a third compatible bundled member instead of bypassing the specified minimum.
  3. Remove the source VLAN from the Port-channel to make two links count as three.
  4. Configure both peers as LACP passive without repairing the failed member.

Explanation

Correct Answer

B:

Min-links intentionally holds the aggregate inactive below the required number of up and bundled links; restoring the third eligible member meets the capacity policy.

Incorrect Answers

A:

Static channel mode on does not restore the required three operational links and removes protocol negotiation safeguards.

C:

VLAN filtering does not change the count of active bundled physical members used for the min-links threshold.

D:

Passive/passive LACP does not initiate negotiation and cannot restore the missing third operational member.

Question 313

A two-link LACP bundle has one member running at 1 Gb/s and the other configured for 100 Mb/s, and only one link joins the bundle. What must be aligned?

  1. Only the switch hostname
  2. Only the VLAN’s DNS name
  3. Compatible speed and duplex settings across member ports
  4. Only the IP default gateway on the switch

Explanation

Correct Answer

C:

EtherChannel members must have compatible physical and switchport parameters to form one bundle.

Incorrect Answers

A:

Hostnames do not make mismatched physical member parameters compatible.

B:

DNS labels do not negotiate port-channel physical characteristics.

D:

The switch management gateway is not the cause of mismatched Ethernet link speeds.

Question 314

A Cisco LACP Port-channel has five eligible physical links, but operations requires no more than three active members and wants the others retained for automatic standby. Which LACP capability implements that upper bound on supported platforms?

  1. `port-channel min-links 3`, which prevents more than three members from joining.
  2. Configure an LACP max-bundle limit of three so remaining eligible members can be hot-standby.
  3. Disable negotiation globally and set every physical interface to static mode on.
  4. Enable PortFast on all interswitch links so LACP negotiates exactly three ports.

Explanation

Correct Answer

B:

LACP max-bundle restricts how many members are active; additional eligible members may remain hot-standby for redundancy.

Incorrect Answers

A:

Min-links imposes a minimum required operational member count, not the requested maximum of active ports.

C:

Static mode on removes LACP negotiation and does not express a controlled active/standby member cap.

D:

PortFast changes STP edge behavior, not the maximum number of active LACP members.

Question 315

A service requires at least two healthy LACP members before the Port-channel forwards. One of three links fails, leaving two operational. What should the minimum-links policy do?

  1. Continue operating even if all physical members fail.
  2. Take the Port-channel down whenever any one member fails.
  3. Promote failed member links into active state by changing their MAC addresses.
  4. Keep the Port-channel operational because its two-member minimum remains satisfied.

Explanation

Correct Answer

D:

A minimum-links setting of two is satisfied when two members remain bundled; below that the logical channel should fail closed.

Incorrect Answers

A:

A bundle cannot forward with zero operational physical links.

B:

One failed member does not violate a minimum of two when two healthy members remain.

C:

Changing member MAC addresses does not fix a physical link or meet a minimum-links criterion.

Question 316

On Rapid PVST+ VLAN 2, four candidate switches have bridge priorities 4096, 8192, 12288, and 16384. All else is equal. Which switch is elected root bridge?

  1. The switch with bridge priority 16384
  2. The switch with bridge priority 4096 (assuming equal extended system ID treatment)
  3. The switch with bridge priority 8192
  4. The switch with bridge priority 12288

Explanation

Correct Answer

B:

Within the VLAN, the smallest spanning-tree bridge ID wins; lower configured priority wins before the MAC tie breaker.

Incorrect Answers

A:

Bridge priority 16384 exceeds the lowest configured priority 4096 by 12288; with the same VLAN ID, this gives a worse STP bridge ID.

C:

Bridge priority 8192 exceeds the lowest configured priority 4096 by 4096; with the same VLAN ID, this gives a worse STP bridge ID.

D:

Bridge priority 12288 exceeds the lowest configured priority 4096 by 8192; with the same VLAN ID, this gives a worse STP bridge ID.

Question 317

Switches SW-A and SW-B have the same Rapid PVST+ priority in VLAN 19. A technician needs the final root-election tiebreaker. What should be compared?

  1. Prefer the switch with the most access ports
  2. Prefer the switch that currently has the highest root path cost
  3. Prefer the switch whose MAC address is numerically highest
  4. Compare bridge MAC addresses; the numerically lowest bridge ID wins

Explanation

Correct Answer

D:

When STP priority values tie, the switch with the lowest MAC portion of the bridge ID wins root election.

Incorrect Answers

A:

Number of ports does not participate in the bridge-ID root election.

B:

Root path cost is not a root bridge election criterion.

C:

STP bridge-ID tie-break chooses the lower, not higher, MAC address.

Question 318

A non-root switch at a disaster-recovery location receives Rapid PVST+ root information on two uplinks with cumulative root path costs 10 and 20. Which uplink is normally selected as root port?

  1. The port with total root path cost 10
  2. The access-facing PortFast interface becomes root port automatically
  3. Both ports must forward simultaneously regardless of cost
  4. The port with total root path cost 20

Explanation

Correct Answer

A:

A non-root switch selects the root port offering the lowest total path cost to the root bridge.

Incorrect Answers

B:

PortFast is an edge feature and does not automatically elect a root-facing uplink.

C:

STP uses one best root port per spanning-tree instance, rather than forwarding all redundant paths unconditionally.

D:

A more expensive root path loses to the lower-cost path under normal STP selection.

Question 319

At a regional healthcare office, desktops sometimes wait for a spanning-tree transition before getting network access, but no switches connect to these specific ports. What feature should be used?

  1. Enable PortFast on every interswitch trunk carrying redundant links
  2. Turn off STP globally to make access ports forward immediately
  3. Configure BPDU filter everywhere so loops can never be detected
  4. Enable PortFast only on appropriate true edge ports connected to end hosts

Explanation

Correct Answer

D:

PortFast accelerates host-edge port forwarding when there is no attached switch path that could create a loop.

Incorrect Answers

A:

PortFast on redundant switch interconnects can eliminate safe topology transition expectations.

B:

Disabling STP removes Layer 2 loop prevention.

C:

Broad BPDU filtering can hide loops rather than prevent them.

Question 320

An office access port in VLAN 70 at a municipal library should connect only to a laptop. If someone attaches a small unmanaged switch that sends spanning-tree BPDUs, the port must shut down. Which feature is appropriate?

  1. Enable only root guard so an unexpected switch cannot transmit any BPDU
  2. Configure a lower STP priority on the unauthorized access device
  3. Enable BPDU Guard on the intended PortFast edge port
  4. Disable all BPDUs at every switch interconnect

Explanation

Correct Answer

C:

BPDU Guard moves an edge port into an error-disabled state when it unexpectedly receives a BPDU.

Incorrect Answers

A:

Root guard prevents superior-root influence; it does not directly apply BPDU Guard edge-violation behavior.

B:

Lowering an unauthorized switch bridge priority could worsen the unauthorized topology influence.

D:

Disabling BPDU processing can conceal, rather than prevent, an access-layer bridging loop.