McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 30

Question 290

A secure DMZ attachment should not disclose neighboring device identity to an untrusted attached appliance. What should be minimized?

  1. Enable CDP and inspect show cdp neighbors detail
  2. Enable LLDP on both endpoints and inspect show lldp neighbors detail
  3. Inspect local and remote interface IDs in discovery output
  4. Limit discovery advertisements on untrusted access-facing interfaces

Explanation

Correct Answer

D:

Restricting unnecessary discovery on untrusted segments reduces information leakage.

Incorrect Answers

A:

CDP is Cisco-proprietary discovery for neighboring devices and can expose management/address/interface details; for the untrusted DMZ appliance connection that must not learn neighbors, the relevant operation is reducing identity information leaked to attached untrusted devices, not Cisco-specific device and port discovery.

B:

LLDP is an IEEE-standard interoperable discovery protocol for neighboring network devices; for the untrusted DMZ appliance connection that must not learn neighbors, the relevant operation is reducing identity information leaked to attached untrusted devices, not interoperable discovery with an IEEE 802.1AB peer.

C:

Discovery protocols advertise interface identifiers that help validate physical cabling maps; for the untrusted DMZ appliance connection that must not learn neighbors, the relevant operation is reducing identity information leaked to attached untrusted devices, not checking which physical endpoints the two ends actually report.

Question 291

Two compatible switches at a warehouse distribution floor must form LACP EtherChannel 1 and each side should actively initiate the protocol. Which configuration is correct?

  1. channel-group 1 mode active on both compatible switch ports
  2. channel-group 1 mode on and use LACP negotiations
  3. channel-group 1 mode passive on both link partners
  4. Configure PAgP desirable on one side and LACP active on the other

Explanation

Correct Answer

A:

LACP actively negotiates a bundle if compatible interfaces participate; active-active works without relying on passive initiators.

Incorrect Answers

B:

On mode is static EtherChannel and does not use LACP negotiation.

C:

Passive/passive does not initiate LACP negotiation, so the bundle generally will not form.

D:

PAgP and LACP are different protocols and cannot negotiate the same bundle.

Question 292

An LACP port-channel at an enterprise data center remains down because both peers have channel-group 8 mode passive. What single mode change should be made?

  1. Keep both peers passive and wait for one to initiate
  2. Configure one side static on and the other passive
  3. Set a larger port-channel number only
  4. Change at least one peer to LACP active mode while the other can remain passive

Explanation

Correct Answer

D:

LACP passive participants only respond; one active participant is needed to initiate negotiation.

Incorrect Answers

A:

Two passive peers do not actively exchange the protocol to create the bundle.

B:

Static mode on does not speak LACP and cannot complete negotiation with passive.

C:

Bundle numbers are local identifiers and do not change negotiation mode.

Question 293

At a disaster-recovery location, two LACP member links are up individually but ACCESS2 suspends one from port-channel 15. What precondition best explains how to restore the aggregate?

  1. Move one port to a different access VLAN than the others
  2. Leave one member in access mode and another in trunk mode
  3. Align speed, duplex and relevant trunk/access VLAN settings on all candidate members
  4. Configure one physical member at an incompatible negotiated speed

Explanation

Correct Answer

C:

EtherChannel members must have compatible physical and Layer 2 attributes to operate as one logical bundle.

Incorrect Answers

A:

Different access VLANs conflict with the shared logical bundle configuration.

B:

Inconsistent L2 port mode can prevent channel members from bundling.

D:

A mismatched link speed can make member aggregation invalid or suspended.

Question 294

Four equal-speed cables form Port-channel22 between distribution switches at a regional healthcare office; several VLANs need to cross the bundle. What is the correct logical-interface configuration?

  1. Apply a routed IP address to one physical member while leaving the port-channel Layer 2
  2. Configure two unrelated routed SVIs instead of Port-channel22
  3. Assign one member to access VLAN 1 and another to trunk VLANs
  4. Configure interface Port-channel22 as a Layer 2 trunk with the required VLAN settings

Explanation

Correct Answer

D:

The logical port-channel is configured consistently as the trunk, with physical member interfaces participating in the bundle.

Incorrect Answers

A:

A routed physical member conflicts with an L2 logical trunk bundle.

B:

SVIs are routed VLAN interfaces and do not replace the required bundled trunk.

C:

Inconsistent member port modes break the EtherChannel operational model.

Question 295

RTR-C and a core peer will aggregate four physical links as one routed Layer 3 interface using Port-channel29. What must be done to configure the logical IP address?

  1. Use switchport mode access on the port-channel while assigning an IP address directly
  2. Use no switchport on the members and apply the IP address to interface Port-channel29
  3. Apply a separate unrelated IP address to each routed member and never configure the logical bundle
  4. Configure trunk native VLAN only and treat it as a routed interface

Explanation

Correct Answer

B:

A Layer 3 EtherChannel has routed member ports and a logical routed port-channel carrying the Layer 3 address.

Incorrect Answers

A:

A Layer 2 access port-channel is not itself an IP-routed interface.

C:

Independent routed members are not the single requested logical EtherChannel interface.

D:

Native VLAN is a Layer 2 trunk setting and does not create a routed port-channel.

Question 296

An EtherChannel at a hospitality property has four 1-Gbps member links, but a single large TCP flow measures close to 1 Gbps. What behavior explains this observation?

  1. Expect every packet to traverse a different member in strict rotation
  2. Expect a per-flow hashing choice rather than perfect equal bandwidth for one traffic flow
  3. Disable LACP because aggregated capacity is useful only for one TCP session
  4. Assume a single flow always adds the physical bandwidth of every member

Explanation

Correct Answer

B:

EtherChannel normally maps flows to members by a deterministic hash; one large flow usually stays on one member.

Incorrect Answers

A:

Per-packet round-robin would commonly reorder packets and is not the normal LACP distribution behavior.

C:

Aggregation increases capacity across multiple flows and improves resilience even if one flow is bounded by one member.

D:

A single flow generally hashes to one member rather than consuming all link capacities additively.

Question 297

A Cisco-only EtherChannel uses PAgP. One switch is configured `channel-group 3 mode auto` and the other has no bundle. What compatible peer mode can initiate PAgP formation?

  1. Configure `channel-group 3 mode active`
  2. Set both ends to `mode auto`
  3. Configure `channel-group 3 mode passive`
  4. Configure `channel-group 3 mode desirable` on the peer

Explanation

Correct Answer

D:

PAgP desirable initiates negotiation; auto responds to initiation but does not start it by itself.

Incorrect Answers

A:

Active initiates LACP and is not the intended PAgP protocol.

B:

Two auto peers do not initiate PAgP negotiation.

C:

Passive is an LACP state, not a PAgP negotiating counterpart.

Question 298

Two links are assigned to Port-channel12. `show etherchannel summary` lists one link as P and the other as I; one physical interface negotiates 100 Mbps while the bundle operates at 1 Gbps. What should be corrected?

  1. Change only the channel-group number on the healthy member.
  2. Bring member speed and other bundle-compatible settings into alignment before expecting both links to bundle.
  3. Replace STP with a larger VLAN number.
  4. Disable LACP on the healthy link while keeping the mismatch.

Explanation

Correct Answer

B:

EtherChannel requires compatible member operational attributes; incompatible settings can cause a port to operate as an individual link.

Incorrect Answers

A:

Changing the good member group would break its existing bundle instead of fixing the inconsistent member.

C:

An unrelated VLAN numbering change does not resolve physical speed incompatibility.

D:

Turning off LACP removes negotiation but does not correct the member capability mismatch.

Question 299

An LACP bundle is up, but an inventory audit must confirm the identity of the neighboring LACP system and partner port numbers without relying on CDP. Which operational command provides that partner information?

  1. show spanning-tree vlan 70
  2. show lacp neighbor
  3. show ip interface brief
  4. show mac address-table dynamic

Explanation

Correct Answer

B:

show lacp neighbor displays LACP partner system ID, partner port information and negotiation state, which directly answers the peer-identity audit.

Incorrect Answers

A:

Spanning-tree output identifies the Layer 2 root, port roles and path costs, not LACP partner-system identifiers or LACP partner port numbers.

C:

show ip interface brief summarizes local interface addressing and status; it does not enumerate LACP actor/partner identifiers.

D:

The MAC address table lists learned forwarding addresses and VLAN/egress ports, not the link-aggregation partner-system ID.

Question 300

A Layer 2 EtherChannel is configured with three member links. Two members are trunks, but the third was changed to access mode. What change addresses the inconsistent bundle?

  1. Rename the interface description to match the other ports
  2. Assign the third member an unrelated routed IPv4 address
  3. Align the third member switchport trunk characteristics with the port-channel members
  4. Enable a separate DHCP relay on the third physical member

Explanation

Correct Answer

C:

All Layer 2 bundle members need compatible switchport type and VLAN trunk parameters.

Incorrect Answers

A:

Description strings are not bundle compatibility parameters.

B:

Adding a routed interface makes it incompatible with the existing Layer 2 trunk bundle.

D:

DHCP relay does not reconcile EtherChannel Layer 2 mode mismatch.