McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 42

Question 410

The SOC needs a correlation event for a new application log field that no predefined SmartEvent rule currently uses. The event must match a specified product and code, then apply its own threshold. The operator must distinguish this from a separate requirement to display only relevant fields in an event detail view. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Define a User-Defined Event and its filters
  2. Save and install the updated SmartEvent Event Policy
  3. Build a customizable view in SmartView or Logs & Events
  4. Configure Event Format field display mapping

Explanation

Correct Answer

A:

User-defined event filters identify relevant log combinations. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Event policy installation publishes event-definition changes, yet that applies to activate user-defined event modifications after editing rather than the observed issue.

C:

SmartView supports graphical views and log queries; this does not resolve the observed condition.

D:

Event Format determines which event details are displayed, but the current evidence calls for a different R82 operation.

Question 411

Before deploying a major R82 gateway upgrade, the change manager needs a recoverable system state and a verified path back if health checks fail. The gateway has enough storage for the documented supported snapshot. An alternate diagnosis concerns the requirement to prepare the gateway before a scheduled release upgrade, for which a colleague suggests back up the appliance and confirm the target package is supported. Based on the recorded symptoms, which corrective step should have priority?

  1. Back up the appliance and confirm the target package is supported
  2. Consult the R82 supported upgrade methods by component type
  3. Choose a documented management Upgrade or Migration method
  4. Capture a supported backup/snapshot and upgrade plan

Explanation

Correct Answer

D:

Recovery artifacts make a failed upgrade safer to reverse. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Backup and compatibility checks reduce recoverability risk, but the current evidence calls for a different R82 operation.

B:

Upgrade method support differs for gateways and management servers; this does not resolve the observed condition.

C:

Management databases use their supported upgrade and migration workflows, yet that applies to plan an upgrade of a management-server database rather than the observed issue.

Question 412

A compressed R82 migrate_server archive passes source checksums but, after FTP transfer, the target checksum differs and the file length has changed. The transfer client reports ASCII conversion was enabled. The operator must distinguish this from a separate requirement to validate R82 database archive contents at the end. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Check imported policies, objects, and management settings
  2. Transfer the database export archive in binary mode
  3. Compare checksums of source and copied export files
  4. Export on the source and import on the destination

Explanation

Correct Answer

B:

Binary-mode transfer preserves compressed archive bytes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Database content inspection tests the outcome of a migration, but the current evidence calls for a different R82 operation.

C:

Matching hashes detect transfer corruption before import, yet that applies to check that a management export survived file transfer rather than the observed issue.

D:

Management migration preserves the database through export/import; this does not resolve the observed condition.

Question 413

An R82 ElasticXL site operates normally until a technician adds a spare unassigned interface into the existing Sync bond for a cabling test. Member detection becomes intermittent and packets are dropped even though production uplinks stay up. A preliminary suggestion is to connect Sync ports through dedicated Layer 2 switching or VLAN. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Do not add or remove an unassigned Sync-bond interface casually
  2. Wire data interfaces to traffic networks and Sync ports to sync domain
  3. Add supported members through ElasticXL admission and cloning
  4. Connect Sync ports through dedicated Layer 2 switching or VLAN

Explanation

Correct Answer

A:

Changing unassigned Sync bond members can reset required flags. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL uses separate data ports and synchronization connectivity, yet that applies to keep data and synchronization links logically separated rather than the observed issue.

C:

ElasticXL is designed to scale membership under one gateway object; this does not resolve the observed condition.

D:

ElasticXL Sync requires a shared suitable Layer 2 domain, but the current evidence calls for a different R82 operation.

Question 414

An active R82 management host fails beyond repair, but the standby was synchronized immediately before the incident. Operations need to retain the existing named objects and installed policy definitions without rebuilding them. A proposed change would be to review which database will be overwritten when setting Standby, which addresses the different requirement to protect useful changes before demoting a colliding management node. Which action instead addresses the observed incident?

  1. Open the Standby Management Server in read-only SmartConsole mode
  2. Retain synchronized objects, rules, and management settings
  3. Promote the synchronized standby management database
  4. Review which database will be overwritten when setting Standby

Explanation

Correct Answer

C:

Synchronized standby retains management configuration for changeover. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Standby permits inspection without competing configuration changes; this does not resolve the observed condition.

B:

Management HA keeps management configuration aligned on peers, yet that applies to explain the value of management database synchronization rather than the observed issue.

D:

Demoting a server to Standby overwrites its data from the Active peer, but the current evidence calls for a different R82 operation.

Question 415

A threat-prevention profile must inspect traffic involving a rotating set of external cloud-service addresses, but only when they are the protected service scope. The imported feed object already updates on gateways. A preliminary suggestion is to use an Updatable Object as source or destination of an HTTPS rule. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Use an Updatable Object based on the service address feed
  2. Use an Updatable Object in Protected Scope
  3. Use an Updatable Object as source or destination of an HTTPS rule
  4. Place an Updatable Object in the Access Control Source column

Explanation

Correct Answer

B:

Threat Prevention supports updatable membership for Protected Scope. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Updatable Objects follow changing externally published addresses, yet that applies to match a cloud service whose published addresses change often rather than the observed issue.

C:

HTTPS Inspection supports Updatable Objects in matching fields, but the current evidence calls for a different R82 operation.

D:

The Updatable Object is supported as an Access Control source; this does not resolve the observed condition.

Question 416

An R82 VPN community contains a permanent tunnel and the operator needs an alert when the tunnel stops responding. Tunnel status monitoring is available, but Logs & Events shows no reaction when the remote site goes offline. The operator must distinguish this from a separate requirement to verify a permanent VPN tunnel remains reachable. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Configure both gateways in the appropriate Site-to-Site VPN community
  2. Use periodic tunnel-test responses to determine up status
  3. Configure the appropriate Permanent Tunnel setting
  4. Enable permanent-tunnel tracking or alert behavior

Explanation

Correct Answer

D:

Permanent tunnel monitoring can issue logs and alerts on failure. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Site-to-Site communities define gateway membership and tunnel policy; this does not resolve the observed condition.

B:

Test packet responses are the basis for permanent tunnel status, but the current evidence calls for a different R82 operation.

C:

Permanent tunnels support configured monitoring between Check Point gateways, yet that applies to keep important managed-gateway tunnels continuously monitored rather than the observed issue.

Question 417

A new SmartEvent Correlation Unit starts without detecting multi-gateway incidents, although each Security Gateway forwards logs successfully to its intended Log Server. The correlation unit has not been pointed at those log sources. The controls that address the separate requirement to enable rule and gateway best-practice assessment are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Point the Correlation Unit at the intended production Log Servers
  2. Edit the relevant Event Definition threshold
  3. Configure Event Format field display mapping
  4. Activate the Compliance Software Blade

Explanation

Correct Answer

A:

Correlation units read relevant configured log sources. This directly addresses the documented incident evidence.

Incorrect Answers

B:

The event definition controls the correlation trigger, yet that applies to tune an event after repeated detections in short intervals rather than the observed issue.

C:

Event Format determines which event details are displayed; this does not resolve the observed condition.

D:

Compliance evaluates Check Point security best practices, but the current evidence calls for a different R82 operation.

Question 418

A managed R82 gateway must receive a security fix without moving to a newer major software release. A colleague selects Version Upgrade and proposes changing the gateway object version. A preliminary suggestion is to use the Version Upgrade action on the selected gateway. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Search for the named Hotfix/Jumbo package in deployment UI
  2. Use the Install Hotfix/Jumbo deployment action
  3. Choose Install a Specific Hotfix/Jumbo and enter the filename
  4. Use the Version Upgrade action on the selected gateway

Explanation

Correct Answer

B:

Hotfix deployment targets fixes on the existing release. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The specific-package lookup matches the approved advisory; this does not resolve the observed condition.

C:

Specific package selection targets the intended hotfix, yet that applies to install a specific rather than latest hotfix package rather than the observed issue.

D:

The Version Upgrade action deploys supported gateway software, but the current evidence calls for a different R82 operation.

Question 419

The source management server is in a restricted network with no internet access. The documented migrate_server process attempts to check for updated tools in Check Point Cloud and fails on timeout. The team has staged the appropriate offline tools already. A preliminary suggestion is to publish or discard sessions with unpublished changes. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Publish or discard sessions with unpublished changes
  2. Use Upgrade with Migration for new-server clean-install cutover
  3. Invoke migrate_server export from the prescribed scripts directory
  4. Apply the documented skip_upgrade_tools_check option where appropriate

Explanation

Correct Answer

D:

Offline workflow supports skipping the online upgrade-tool check. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The migration prerequisite resolves uncommitted sessions, but the current evidence calls for a different R82 operation.

B:

Migration exports management state and imports to a separate target; this does not resolve the observed condition.

C:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

Question 420

An administrator needs to move a member from ElasticXL Site 1 into Site 2. It already appears as a managed member of Site 1, so it is not pending for enrollment in the second site. A proposed change would be to connect Sync ports through dedicated Layer 2 switching or VLAN, which addresses the different requirement to provide the transport for cluster member synchronization. Which action instead addresses the observed incident?

  1. Create a new Site while admitting the pending appliance
  2. Add the pending appliance to the existing Site
  3. Remove it then add as a pending member to the target site
  4. Connect Sync ports through dedicated Layer 2 switching or VLAN

Explanation

Correct Answer

C:

The documented workflow removes and re-adds a node to the chosen site. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A new site is used to establish High Availability sites; this does not resolve the observed condition.

B:

Adding to the existing site enables supported load sharing, yet that applies to increase capacity inside an existing ElasticXL Site rather than the observed issue.

D:

ElasticXL Sync requires a shared suitable Layer 2 domain, but the current evidence calls for a different R82 operation.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests