McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 41

Question 400

After a management-link outage, both R82 Management Servers show Active in the HA status pane. Each has accepted changes while isolated. The owner has chosen which database to retain and captured the other changes. The controls that address the separate requirement to make configuration changes while the management pair remains healthy are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use Management HA actions to set one server to Standby
  2. Use the Active Management Server for write operations
  3. Initiate changeover so a healthy standby becomes Active
  4. Leave the newly defined secondary Management Server in Standby

Explanation

Correct Answer

A:

One Active server is required for a consistent normal HA state. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Only the Active server accepts normal management changes, but the current evidence calls for a different R82 operation.

C:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

D:

Secondary management servers start in Standby by default; this does not resolve the observed condition.

Question 401

An R82 firewall policy change includes two new Manual NAT rules and an updated associated Access Control rule. SmartConsole still shows the session unpublished; the gateway continues enforcing the previous installed policy. An alternate diagnosis concerns the requirement to reach a privately addressed Management Server across NAT, for which a colleague suggests configure supported NAT for management control connections. Based on the recorded symptoms, which corrective step should have priority?

  1. Open Security Policies > Access Control > NAT
  2. Publish the session and install the relevant security policy
  3. Use the Translated Services column in a Manual NAT rule
  4. Configure supported NAT for management control connections

Explanation

Correct Answer

B:

Published and installed policy activates gateway enforcement changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The Access Control NAT policy contains manual translation rules, yet that applies to locate Manual NAT configuration in SmartConsole rather than the observed issue.

C:

Manual NAT can translate services as well as addresses; this does not resolve the observed condition.

D:

Management behind NAT is supported with proper address mapping, but the current evidence calls for a different R82 operation.

Question 402

A VPN gateway has two WAN links with separate public source addresses. Normal IP routing reaches the remote gateway, but its IKE peer unexpectedly sees the wrong local source address and rejects the tunnel. A preliminary suggestion is to configure VPN Load Sharing through Link Selection when supported. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Configure the gateway Link Selection settings
  2. Configure VPN Load Sharing through Link Selection when supported
  3. Confirm chosen local interface and peer-advertised address
  4. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer

Explanation

Correct Answer

A:

Link Selection controls VPN interface and address selection. This directly addresses the documented incident evidence.

Incorrect Answers

B:

VPN Link Selection can share VPN traffic across available links, but the current evidence calls for a different R82 operation.

C:

Link Selection determines the address advertised and route used; this does not resolve the observed condition.

D:

Enhanced Link Selection supports cloud IPsec redundancy without proprietary RDP, with DAIP and platform limits, yet that applies to provide multi-link cloud IPsec interoperability on a supported fixed-address, non-ElasticXL R82 gateway rather than the observed issue.

Question 403

A custom SmartEvent alert counts repeated legitimate health probes as incidents and pages the SOC repeatedly. Analysts confirm the event logic is relevant but the detection threshold is too sensitive. A proposed change would be to configure a suitable event exception or exclusion, which addresses the different requirement to exclude expected maintenance events from a detection rule. Which action instead addresses the observed incident?

  1. Configure a suitable event exception or exclusion
  2. Configure the relevant SmartEvent alert reaction
  3. Save and install the updated SmartEvent Event Policy
  4. Adjust its event threshold after examining the event

Explanation

Correct Answer

D:

Tuning event thresholds reduces false-positive correlation. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event definitions support exceptions and exclusions for noisy patterns, but the current evidence calls for a different R82 operation.

B:

Event alerts are implemented in SmartEvent reactions; this does not resolve the observed condition.

C:

Event policy installation publishes event-definition changes, yet that applies to activate user-defined event modifications after editing rather than the observed issue.

Question 404

A change window will run Check Point’s Central Deployment Tool to update software on gateway members across remote branches. The installer asks to run the tool directly on a branch firewall with no management authorization. The operator must distinguish this from a separate requirement to apply a hotfix to a set of Security Gateways. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Use SmartConsole Central Deployment where supported
  2. Select gateways in SmartConsole and Install Hotfix/Jumbo
  3. Run the Central Deployment Tool from the Management Server
  4. Check Management Server connectivity to selected gateways

Explanation

Correct Answer

C:

CDT uses the Management Server to deploy to gateways. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

B:

Central Deployment distributes hotfixes to selected gateway targets, but the current evidence calls for a different R82 operation.

D:

Remote deployment depends on control connectivity to targets, yet that applies to verify network reachability for remote package deployment rather than the observed issue.

Question 405

The R82 management import command has completed and the main daemon is running, but the acceptance team still needs proof that all site rules and gateway objects transferred correctly. The controls that address the separate requirement to check that a management export survived file transfer are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Invoke migrate_server import for the exported archive
  2. Check imported policies, objects, and management settings
  3. Choose management database migration rather than gateway policy reinstall
  4. Compare checksums of source and copied export files

Explanation

Correct Answer

B:

Database content inspection tests the outcome of a migration. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The migration import restores the exported management database; this does not resolve the observed condition.

C:

Management migration moves objects, settings, and policy database, yet that applies to preserve a database while changing the underlying host rather than the observed issue.

D:

Matching hashes detect transfer corruption before import, but the current evidence calls for a different R82 operation.

Question 406

An ElasticXL apprentice is adding a supported member that has just begun cloning software from SMO. The engineer needs a continuously updating progress view and alerts during admission, not just a one-time configuration snapshot. A preliminary suggestion is to use Gaia Portal Cluster Management > Pending Gateways. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Use Gaia gClish for global cluster commands
  2. Use Gaia Portal Cluster Management > Pending Gateways
  3. Use insights or show cluster info provision live
  4. Inspect /var/log/lightshot.log on the relevant member

Explanation

Correct Answer

C:

ElasticXL provides member onboarding and clone status commands. This directly addresses the documented incident evidence.

Incorrect Answers

A:

gClish supports global member-oriented cluster administration; this does not resolve the observed condition.

B:

Pending Gateways is the supported member-admission workflow, but the current evidence calls for a different R82 operation.

D:

The lightshot log documents SMO snapshot and image cloning, yet that applies to investigate image-cloning progress problems rather than the observed issue.

Question 407

During a DR test, the team asks which configuration content is automatically copied between synchronized R82 Management Servers after sessions are published. It considers replacing synchronization with Gaia snapshots of the operating system. The operator must distinguish this from a separate requirement to create mutually consistent backup material for a management HA pair. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Retain synchronized objects, rules, and management settings
  2. Back up or snapshot all HA servers at the same point in time
  3. Promote the synchronized standby management database
  4. Plan management-server redundancy separately from gateway clustering

Explanation

Correct Answer

A:

Management HA keeps management configuration aligned on peers. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Coordinated backups retain a consistent state across HA peers, but the current evidence calls for a different R82 operation.

C:

Synchronized standby retains management configuration for changeover, yet that applies to protect policies and rule definitions after active-server failure rather than the observed issue.

D:

Management HA protects the management database and administration; this does not resolve the observed condition.

Question 408

An Updatable Object already exists in a Threat Prevention policy, but its service-address membership has stopped refreshing. The management server and gateway share the correct policy; the provider remains listed. A preliminary suggestion is to search Logs & Events for the named object and status Succeeded. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Search Logs & Events for the named object and status Succeeded
  2. Import the Updatable Object into a Destination column
  3. Use an Updatable Object based on the service address feed
  4. Verify Management Server and Gateway reachability to Check Point cloud

Explanation

Correct Answer

D:

The relevant management and gateway components need cloud access. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Successful update logs provide feed-specific operational evidence, but the current evidence calls for a different R82 operation.

B:

Access Control can match an Updatable Object as a destination, yet that applies to control cloud-service destinations in the Access Control policy rather than the observed issue.

C:

Updatable Objects follow changing externally published addresses; this does not resolve the observed condition.

Question 409

A headquarters R82 gateway must be the central encrypted transit point for three branches. The branches should not build arbitrary direct site-to-site tunnels, and all protected subnets use headquarters as a hub. A proposed change would be to use a Mesh VPN community for peer relationships, which addresses the different requirement to connect every gateway in a small trusted group directly to peers. Which action instead addresses the observed incident?

  1. Use a Mesh VPN community for peer relationships
  2. Configure both gateways in the appropriate Site-to-Site VPN community
  3. Use a Star VPN community with the hub as center
  4. Verify VPN domain definitions and encryption-domain selectors

Explanation

Correct Answer

C:

A Star community models branch-to-center connectivity. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A Mesh model supports direct relationships among participating members, but the current evidence calls for a different R82 operation.

B:

Site-to-Site communities define gateway membership and tunnel policy, yet that applies to protect traffic between two managed security gateways rather than the observed issue.

D:

VPN domains govern which networks are expected through the tunnel; this does not resolve the observed condition.

Question 410

The SOC needs a correlation event for a new application log field that no predefined SmartEvent rule currently uses. The event must match a specified product and code, then apply its own threshold. The operator must distinguish this from a separate requirement to display only relevant fields in an event detail view. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Define a User-Defined Event and its filters
  2. Save and install the updated SmartEvent Event Policy
  3. Build a customizable view in SmartView or Logs & Events
  4. Configure Event Format field display mapping

Explanation

Correct Answer

A:

User-defined event filters identify relevant log combinations. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Event policy installation publishes event-definition changes, yet that applies to activate user-defined event modifications after editing rather than the observed issue.

C:

SmartView supports graphical views and log queries; this does not resolve the observed condition.

D:

Event Format determines which event details are displayed, but the current evidence calls for a different R82 operation.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests