McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 43

Question 420

An administrator needs to move a member from ElasticXL Site 1 into Site 2. It already appears as a managed member of Site 1, so it is not pending for enrollment in the second site. A proposed change would be to connect Sync ports through dedicated Layer 2 switching or VLAN, which addresses the different requirement to provide the transport for cluster member synchronization. Which action instead addresses the observed incident?

  1. Create a new Site while admitting the pending appliance
  2. Add the pending appliance to the existing Site
  3. Remove it then add as a pending member to the target site
  4. Connect Sync ports through dedicated Layer 2 switching or VLAN

Explanation

Correct Answer

C:

The documented workflow removes and re-adds a node to the chosen site. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A new site is used to establish High Availability sites; this does not resolve the observed condition.

B:

Adding to the existing site enables supported load sharing, yet that applies to increase capacity inside an existing ElasticXL Site rather than the observed issue.

D:

ElasticXL Sync requires a shared suitable Layer 2 domain, but the current evidence calls for a different R82 operation.

Question 421

During an R82 management HA installation review, both peers have different internal IP addresses, and a technician calls the higher-address peer the primary. The deployment record shows which management server was installed first. A proposed change would be to leave the newly defined secondary Management Server in Standby, which addresses the different requirement to assign the default role to newly installed secondary management. Which action instead addresses the observed incident?

  1. Use the Active Management Server for write operations
  2. Initiate changeover so a healthy standby becomes Active
  3. Leave the newly defined secondary Management Server in Standby
  4. Treat the first installed management server as the primary

Explanation

Correct Answer

D:

Installation sequence defines primary versus secondary roles. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Only the Active server accepts normal management changes, yet that applies to make configuration changes while the management pair remains healthy rather than the observed issue.

B:

A controlled management changeover restores an Active management server; this does not resolve the observed condition.

C:

Secondary management servers start in Standby by default, but the current evidence calls for a different R82 operation.

Question 422

An internal migration needs a static address translation only for inbound sessions to one legacy server. The team must avoid creating a symmetric outbound mapping for every flow. A proposed change would be to create a Manual NAT rule with both translated fields, which addresses the different requirement to translate the source and destination IP in one connection. Which action instead addresses the observed incident?

  1. Create an appropriate one-direction Manual NAT policy rule
  2. Create a Manual NAT rule with both translated fields
  3. Place the intended matching rule first in the NAT rule order
  4. Use the Translated Services column in a Manual NAT rule

Explanation

Correct Answer

A:

Manual NAT supports direction-specific static translation. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Manual NAT allows simultaneous source and destination translation, but the current evidence calls for a different R82 operation.

C:

Only the first matching Manual NAT rule is enforced; this does not resolve the observed condition.

D:

Manual NAT can translate services as well as addresses, yet that applies to translate the destination service port for one published server rather than the observed issue.

Question 423

A VPN gateway has two WAN links with separate public source addresses. Normal IP routing reaches the remote gateway, but its IKE peer unexpectedly sees the wrong local source address and rejects the tunnel. The controls that address the separate requirement to select different egress based on VPN service requirements are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Review Service Based Link Selection policies
  2. Configure VPN Load Sharing through Link Selection when supported
  3. Configure the gateway Link Selection settings
  4. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer

Explanation

Correct Answer

C:

Link Selection controls VPN interface and address selection. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Service Based Link Selection addresses bandwidth usage by service, but the current evidence calls for a different R82 operation.

B:

VPN Link Selection can share VPN traffic across available links, yet that applies to define how VPN traffic is distributed across multiple usable links rather than the observed issue.

D:

Enhanced Link Selection supports cloud IPsec redundancy without proprietary RDP, with DAIP and platform limits; this does not resolve the observed condition.

Question 424

A low-risk R82 SmartEvent correlation definition is producing the same severity as confirmed critical threats, confusing the SOC prioritization queue. The underlying detection threshold is correct and must remain unchanged. The operator must distinguish this from a separate requirement to exclude expected maintenance events from a detection rule. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Configure a suitable event exception or exclusion
  2. Assign appropriate SmartEvent event severity
  3. Save and install the updated SmartEvent Event Policy
  4. Assign an Automatic Reaction to its event definition

Explanation

Correct Answer

B:

Event definitions include configurable severity where supported. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event definitions support exceptions and exclusions for noisy patterns, but the current evidence calls for a different R82 operation.

C:

Event policy installation publishes event-definition changes, yet that applies to activate user-defined event modifications after editing rather than the observed issue.

D:

Automatic Reactions connect event detection to responses; this does not resolve the observed condition.

Question 425

A planned R82 transition concerns the Security Management Server database rather than a remote Security Gateway. The administrator proposes selecting the management server as a CDT gateway target. An alternate diagnosis concerns the requirement to perform a management in-place upgrade with supported tooling, for which a colleague suggests use CPUSE for a compatible management-server in-place upgrade. Based on the recorded symptoms, which corrective step should have priority?

  1. Use CPUSE for a compatible management-server in-place upgrade
  2. Consult the R82 supported upgrade methods by component type
  3. Capture a supported backup/snapshot and upgrade plan
  4. Choose a documented management Upgrade or Migration method

Explanation

Correct Answer

D:

Management databases use their supported upgrade and migration workflows. This directly addresses the documented incident evidence.

Incorrect Answers

A:

CPUSE supports management in-place upgrade workflows, but the current evidence calls for a different R82 operation.

B:

Upgrade method support differs for gateways and management servers, yet that applies to assess available upgrade pathways before execution rather than the observed issue.

C:

Recovery artifacts make a failed upgrade safer to reverse; this does not resolve the observed condition.

Question 426

A management database export archive was transferred from the source R82 server to a replacement host. The transfer tool completed without an error but the archive size differs slightly. Import has not started. A proposed change would be to export the management database before upgrading and re-import afterward, which addresses the different requirement to keep existing management policy content in an advanced upgrade. Which action instead addresses the observed incident?

  1. Compare checksums of source and copied export files
  2. Export the management database before upgrading and re-import afterward
  3. Close SmartConsole GUI clients on the source server
  4. Transfer the database export archive in binary mode

Explanation

Correct Answer

A:

Matching hashes detect transfer corruption before import. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Advanced Upgrade preserves state through export and import, but the current evidence calls for a different R82 operation.

C:

Closing clients avoids concurrent management modifications; this does not resolve the observed condition.

D:

Binary-mode transfer preserves compressed archive bytes, yet that applies to move export archives between management servers safely rather than the observed issue.

Question 427

An ElasticXL apprentice is adding a supported member that has just begun cloning software from SMO. The engineer needs a continuously updating progress view and alerts during admission, not just a one-time configuration snapshot. The controls that address the separate requirement to investigate image-cloning progress problems are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Allow the automatic image/configuration clone from SMO
  2. Inspect /var/log/lightshot.log on the relevant member
  3. Use insights or show cluster info provision live
  4. Use Gaia gClish for global cluster commands

Explanation

Correct Answer

C:

ElasticXL provides member onboarding and clone status commands. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL copies the SMO image and settings to added members; this does not resolve the observed condition.

B:

The lightshot log documents SMO snapshot and image cloning, but the current evidence calls for a different R82 operation.

D:

gClish supports global member-oriented cluster administration, yet that applies to enter cluster-aware Gaia configuration context rather than the observed issue.

Question 428

The Active R82 Management Server fails and is confirmed offline. The Standby is synchronized and reachable by administrators. Security Gateways continue using the installed policy, but urgent management changes are required. A proposed change would be to use Management HA actions to set one server to Standby, which addresses the different requirement to correct a collision where both Management Servers report Active. Which action instead addresses the observed incident?

  1. Verify exactly one Active and remaining Standby status
  2. Initiate changeover so a healthy standby becomes Active
  3. Use the Active Management Server for write operations
  4. Use Management HA actions to set one server to Standby

Explanation

Correct Answer

B:

A controlled management changeover restores an Active management server. This directly addresses the documented incident evidence.

Incorrect Answers

A:

One Active peer is the expected result of controlled changeover; this does not resolve the observed condition.

C:

Only the Active server accepts normal management changes, yet that applies to make configuration changes while the management pair remains healthy rather than the observed issue.

D:

One Active server is required for a consistent normal HA state, but the current evidence calls for a different R82 operation.

Question 429

An operator is editing an R82 Access Control allow rule and wants to specify a destination service-port translation. The Access Control rule editor has no Translated Services column. The controls that address the separate requirement to translate an address only in a specific traffic direction are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Open Security Policies > Access Control > NAT
  2. Create translated objects, NAT rule, and matching Access Control rule
  3. Place the intended matching rule first in the NAT rule order
  4. Create an appropriate one-direction Manual NAT policy rule

Explanation

Correct Answer

A:

The Access Control NAT policy contains manual translation rules. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Manual NAT workflows also require valid translated objects and access, yet that applies to publish a server using a manually translated address rather than the observed issue.

C:

Only the first matching Manual NAT rule is enforced; this does not resolve the observed condition.

D:

Manual NAT supports direction-specific static translation, but the current evidence calls for a different R82 operation.

Question 430

Two R82 gateways are planned to protect IPv6 networks over Site-to-Site IPsec. A legacy design document requests IKEv1 aggressive mode, although the protected flows use IPv6 on both ends. An alternate diagnosis concerns the requirement to analyze failures caused by inconsistent encryption algorithms, for which a colleague suggests compare phase settings, algorithms, and proposals on both peers. Based on the recorded symptoms, which corrective step should have priority?

  1. Verify phase-two traffic selectors and matching policy rules
  2. Configure both gateways in the appropriate Site-to-Site VPN community
  3. Use IKEv2 for IPv6 VPN negotiations
  4. Compare phase settings, algorithms, and proposals on both peers

Explanation

Correct Answer

C:

R82 IPv6 VPN uses IKEv2. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Data associations still need matching selectors and permitted traffic, yet that applies to troubleshoot a stable VPN phase-one but no protected data rather than the observed issue.

B:

Site-to-Site communities define gateway membership and tunnel policy; this does not resolve the observed condition.

D:

Both IKE/IPsec peers must agree on compatible proposals, but the current evidence calls for a different R82 operation.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests