McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 22

Question 210

A policy change is approved for an ElasticXL cluster with several physical members. The team sees only one logical cluster gateway object in R82 SmartConsole but wants to install separate unrelated rulebases on each appliance. The controls that address the separate requirement to distribute the first member software to newly joined nodes are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Install policy on the cluster single gateway object
  2. Allow the automatic image/configuration clone from SMO
  3. Use Gaia Portal Cluster Management Actions > Delete
  4. Add supported members through ElasticXL admission and cloning

Explanation

Correct Answer

A:

The SMO represents the entire cluster for policy management. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL copies the SMO image and settings to added members, but the current evidence calls for a different R82 operation.

C:

Cluster Management supports member removal; this does not resolve the observed condition.

D:

ElasticXL is designed to scale membership under one gateway object, yet that applies to scale out the cluster without changing the gateway identity rather than the observed issue.

Question 211

A management-HA changeover is reported as complete after planned maintenance. Operators can reach both R82 servers and want to ensure that the promotion did not leave a collision. A proposed change would be to select which node remains Active before resetting its peer, which addresses the different requirement to resolve two active nodes safely during collision troubleshooting. Which action instead addresses the observed incident?

  1. Select which node remains Active before resetting its peer
  2. Initiate changeover so a healthy standby becomes Active
  3. Review which database will be overwritten when setting Standby
  4. Verify exactly one Active and remaining Standby status

Explanation

Correct Answer

D:

One Active peer is the expected result of controlled changeover. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Collision recovery should establish an authoritative Active node, but the current evidence calls for a different R82 operation.

B:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

C:

Demoting a server to Standby overwrites its data from the Active peer; this does not resolve the observed condition.

Question 212

The SOC wants to allow inbound synchronization traffic only when its source belongs to the provider’s changing published cloud ranges. The destination is a fixed management subnet. The operator must distinguish this from a separate requirement to dynamically target cloud providers in HTTPS Inspection. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Let the Updatable Object update on the Security Gateway
  2. Use an Updatable Object based on the service address feed
  3. Place an Updatable Object in the Access Control Source column
  4. Use an Updatable Object as source or destination of an HTTPS rule

Explanation

Correct Answer

C:

The Updatable Object is supported as an Access Control source. This directly addresses the documented incident evidence.

Incorrect Answers

A:

An Updatable Object membership refresh does not require policy reinstall; this does not resolve the observed condition.

B:

Updatable Objects follow changing externally published addresses, yet that applies to match a cloud service whose published addresses change often rather than the observed issue.

D:

HTTPS Inspection supports Updatable Objects in matching fields, but the current evidence calls for a different R82 operation.

Question 213

An operator expects an R82 managed Check Point permanent tunnel to be UP merely because it has not logged a recent disconnect. The tunnel monitor has no reply from the peer for its active probes. Which observation should determine its health instead?

  1. Enable permanent-tunnel tracking or alert behavior
  2. Select the particular tunnel in community Tunnel Management
  3. Apply the permanent-tunnel setting to the entire community
  4. Use periodic tunnel-test responses to determine up status

Explanation

Correct Answer

D:

Use periodic tunnel-test responses to confirm an established Check Point-to-Check Point permanent tunnel remains reachable.

Incorrect Answers

A:

Alert tracking reports probe failures but does not replace the probe result for live status.

B:

Choosing which tunnel is designated permanent does not prove that the remote peer replied to its active monitoring probes.

C:

Making all community tunnels permanent cannot prove the unresponsive peer is currently reachable.

Question 214

A SOC receives hundreds of individual gateway connection logs with no single entry proving an ongoing password-spray campaign. The analyst needs one event that correlates repeated authentication failures over an interval across devices. A preliminary suggestion is to configure a SmartEvent threshold of log count and seconds. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Configure a SmartEvent threshold of log count and seconds
  2. Configure a suitable event exception or exclusion
  3. Deploy and configure SmartEvent event correlation
  4. Configure the relevant SmartEvent alert reaction

Explanation

Correct Answer

C:

SmartEvent correlates log patterns into events. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartEvent threshold combines frequency and interval, but the current evidence calls for a different R82 operation.

B:

Event definitions support exceptions and exclusions for noisy patterns; this does not resolve the observed condition.

D:

Event alerts are implemented in SmartEvent reactions, yet that applies to notify an operator for a notable event rather than the observed issue.

Question 215

An R82 administrator wants to push an approved software package to two members of a managed high-availability gateway cluster. They are selecting targets in SmartConsole and accidentally highlight the Management Server object alone. A proposed change would be to use SmartConsole Central Deployment where supported, which addresses the different requirement to choose the recommended remote upgrade workflow for gateways. Which action instead addresses the observed incident?

  1. Use SmartConsole Central Deployment where supported
  2. Select gateways in SmartConsole and Install Hotfix/Jumbo
  3. Use supported Central Deployment parallel target selection
  4. Select Gateway & Server objects under Central Deployment

Explanation

Correct Answer

D:

The deployment selection identifies actual upgrade targets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Central Deployment is the documented gateway best practice, but the current evidence calls for a different R82 operation.

B:

Central Deployment distributes hotfixes to selected gateway targets; this does not resolve the observed condition.

C:

Central Deployment can process several supported targets, yet that applies to upgrade multiple gateway targets efficiently rather than the observed issue.

Question 216

An upgrade checklist instructs the engineer to capture the full R82 Management Server database using the supported migration utility. The operator instead exports only an Access Control policy file. The controls that address the separate requirement to move an R82 Management Server database to another R82 host are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Invoke migrate_server export from the prescribed scripts directory
  2. Invoke migrate_server import for the exported archive
  3. Export on the source and import on the destination
  4. Back up the current management configuration first

Explanation

Correct Answer

A:

The management migration tool serializes the management database. This directly addresses the documented incident evidence.

Incorrect Answers

B:

The migration import restores the exported management database, yet that applies to import the exported R82 database on the replacement server rather than the observed issue.

C:

Management migration preserves the database through export/import, but the current evidence calls for a different R82 operation.

D:

The R82 migration procedure begins with source backups; this does not resolve the observed condition.

Question 217

A capacity worksheet recommends increasing R82 ElasticXL membership far beyond the current appliance count, based solely on CPU demand. The proposed new hardware platform has not been validated in the supported topology tables. The controls that address the separate requirement to maintain R82-supported acceleration and default scheduling in an ElasticXL Cluster are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Keep SecureXL in Kernel Mode (KPPAK) and retain default CoreXL Dynamic Balancing
  2. Review supported platform and cluster membership limits
  3. Remove it then add as a pending member to the target site
  4. Add supported members through ElasticXL admission and cloning

Explanation

Correct Answer

B:

ElasticXL has documented platform and membership constraints. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL requires KPPAK and Check Point recommends retaining the default CoreXL Dynamic Balancing configuration, but the current evidence calls for a different R82 operation.

C:

The documented workflow removes and re-adds a node to the chosen site; this does not resolve the observed condition.

D:

ElasticXL is designed to scale membership under one gateway object, yet that applies to scale out the cluster without changing the gateway identity rather than the observed issue.

Question 218

Management High Availability shows Sync Error for a standby database. Network connectivity and SIC between the two R82 management peers both pass, and exactly one member is Active. No pending SmartConsole edits remain. The operator must distinguish this from a separate requirement to review whether the management HA partner is synchronized. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Open the Management High Availability status in SmartConsole
  2. Check connectivity between management servers first
  3. Initiate a manual synchronization between management peers
  4. Assume HA synchronization has completed merely because both management servers remain reachable

Explanation

Correct Answer

C:

A manual sync is the documented response to Sync Error. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management HA status reports peer role and synchronization health, but the current evidence calls for a different R82 operation.

B:

Peer reachability is a first troubleshooting check for lost communication; this does not resolve the observed condition.

D:

Network and SIC connectivity do not establish successful database synchronization when the standby is explicitly in Sync Error.

Question 219

Only HTTPS traffic from a specified partner to one hosted service should have its destination TCP port rewritten; SSH to the same address must not be translated. The NAT object matches both sources currently. An alternate diagnosis concerns the requirement to advertise a Manual NAT translated IP at the local network boundary, for which a colleague suggests configure required Proxy ARP entries for the translated address. Based on the recorded symptoms, which corrective step should have priority?

  1. Create a Manual NAT rule matching the specified address pair
  2. Match Original Services and set corresponding Translated Services
  3. Create translated objects, NAT rule, and matching Access Control rule
  4. Configure required Proxy ARP entries for the translated address

Explanation

Correct Answer

B:

Manual NAT can restrict rules by service and translated port. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT can match both original source and destination, yet that applies to restrict address translation to a specific source and destination rather than the observed issue.

C:

Manual NAT workflows also require valid translated objects and access; this does not resolve the observed condition.

D:

Manual NAT deployments require Proxy ARP where applicable, but the current evidence calls for a different R82 operation.

Question 220

Two R82 gateways are planned to protect IPv6 networks over Site-to-Site IPsec. A legacy design document requests IKEv1 aggressive mode, although the protected flows use IPv6 on both ends. What IKE choice is supported for IPv6 VPN negotiation?

  1. Review IKE negotiation settings and authentication on both peers
  2. Configure matching pre-shared keys on both VPN peers
  3. Configure the gateway Link Selection settings
  4. Use IKEv2 for IPv6 VPN negotiations

Explanation

Correct Answer

D:

Use IKEv2 for IPv6 Site-to-Site VPN traffic; R82 IPv6 protection does not support IKEv1 aggressive mode.

Incorrect Answers

A:

General IKE troubleshooting does not change the protocol support requirement for IPv6 VPNs.

B:

Matching pre-shared keys can authenticate IKE but cannot make IKEv1 aggressive mode supported for IPv6.

C:

Local Link Selection configuration does not enable an unsupported IKE generation for IPv6.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests