McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 20

Question 190

During a DR test, the team asks which configuration content is automatically copied between synchronized R82 Management Servers after sessions are published. It considers replacing synchronization with Gaia snapshots of the operating system. What is the correct database-level expectation?

  1. Back up or snapshot all HA servers at the same point in time
  2. Use Management High Availability database synchronization
  3. Retain synchronized objects, rules, and management settings
  4. Plan management-server redundancy separately from gateway clustering

Explanation

Correct Answer

C:

Management HA preserves published security rules, network objects, and management settings in the synchronized peer database.

Incorrect Answers

A:

Point-in-time Gaia snapshots do not replace ongoing management revision propagation.

B:

Enabling the sync mechanism is necessary but the requirement is which managed data it preserves.

D:

Management and gateway redundancy are separate, but that does not identify the replicated data.

Question 191

A SaaS provider publishes rapidly changing network ranges and Check Point maintains its current addresses in a cloud feed. A policy written with last quarter’s manually entered host IPs frequently drops legitimate connections. A preliminary suggestion is to use an Updatable Object in Protected Scope. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Import the Updatable Object into a Destination column
  2. Use an Updatable Object in Protected Scope
  3. Use an Updatable Object based on the service address feed
  4. Let the Updatable Object update on the Security Gateway

Explanation

Correct Answer

C:

Updatable Objects follow changing externally published addresses. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Access Control can match an Updatable Object as a destination, yet that applies to control cloud-service destinations in the Access Control policy rather than the observed issue.

B:

Threat Prevention supports updatable membership for Protected Scope, but the current evidence calls for a different R82 operation.

D:

An Updatable Object membership refresh does not require policy reinstall; this does not resolve the observed condition.

Question 192

Four branch gateways require direct encrypted communication with every other branch. No central gateway should be mandatory, and the sites are all managed in the same R82 environment. A proposed change would be to compare phase settings, algorithms, and proposals on both peers, which addresses the different requirement to analyze failures caused by inconsistent encryption algorithms. Which action instead addresses the observed incident?

  1. Use a Star VPN community with the hub as center
  2. Use a Mesh VPN community for peer relationships
  3. Compare phase settings, algorithms, and proposals on both peers
  4. Configure both gateways in the appropriate Site-to-Site VPN community

Explanation

Correct Answer

B:

A Mesh model supports direct relationships among participating members. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A Star community models branch-to-center connectivity, yet that applies to connect multiple branches through a central hub site rather than the observed issue.

C:

Both IKE/IPsec peers must agree on compatible proposals, but the current evidence calls for a different R82 operation.

D:

Site-to-Site communities define gateway membership and tunnel policy; this does not resolve the observed condition.

Question 193

The compliance officer has completed the R82 framework assessment and must send management a printable PDF of noncompliant controls and the compliance scoring summary. Raw traffic logs are not the requested evidence artifact. The controls that address the separate requirement to enable rule and gateway best-practice assessment are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Review Regulatory Compliance requirements and scores
  2. Activate the Compliance Software Blade
  3. Generate a Compliance Blade report in the Reports view
  4. Open Logs & Events and select Reports

Explanation

Correct Answer

C:

Compliance reporting supports a PDF output. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Compliance maps checks to selected regulatory requirements, yet that applies to inspect a policy against a regulatory framework rather than the observed issue.

B:

Compliance evaluates Check Point security best practices, but the current evidence calls for a different R82 operation.

D:

Reports summarize monitored activity for presentation; this does not resolve the observed condition.

Question 194

During an overnight maintenance window, twenty managed R82 gateways require a coordinated software upgrade. Central Deployment supports selecting a fleet but queues targets beyond the supported concurrent installation limit. Which deployment approach satisfies the batch requirement?

  1. Rely on policy-install concurrency settings to increase the number of simultaneous firmware upgrades
  2. Select Gateway & Server objects under Central Deployment
  3. Use Central Deployment Version Upgrade to Specific Major Version
  4. Use supported Central Deployment parallel target selection

Explanation

Correct Answer

D:

Central Deployment can process several supported targets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Rely on policy-install concurrency settings to increase the number of simultaneous firmware upgrades. Policy installation is a separate operation; the task requires software-package Central Deployment, not firewall-policy installation.

B:

The deployment selection identifies actual upgrade targets, but the current evidence calls for a different R82 operation.

C:

Central Deployment offers target-version selection; this does not resolve the observed condition.

Question 195

The source management server is in a restricted network with no internet access. The documented migrate_server process attempts to check for updated tools in Check Point Cloud and fails on timeout. The team has staged the appropriate offline tools already. An alternate diagnosis concerns the requirement to test server software prerequisites before the migration, for which a colleague suggests run and review the documented Pre-Upgrade Verifier where applicable. Based on the recorded symptoms, which corrective step should have priority?

  1. Run and review the documented Pre-Upgrade Verifier where applicable
  2. Apply the documented skip_upgrade_tools_check option where appropriate
  3. Invoke migrate_server export from the prescribed scripts directory
  4. Use Upgrade with Migration for new-server clean-install cutover

Explanation

Correct Answer

B:

Offline workflow supports skipping the online upgrade-tool check. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Pre-upgrade checks identify incompatible conditions before cutover, but the current evidence calls for a different R82 operation.

C:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

D:

Migration exports management state and imports to a separate target; this does not resolve the observed condition.

Question 196

A capacity worksheet recommends increasing R82 ElasticXL membership far beyond the current appliance count, based solely on CPU demand. The proposed new hardware platform has not been validated in the supported topology tables. What must be confirmed first?

  1. Add the pending appliance to the existing Site
  2. Add supported members through ElasticXL admission and cloning
  3. Expect the SMO to accept and distribute traffic to members
  4. Review supported platform and cluster membership limits

Explanation

Correct Answer

D:

Check Check Point’s supported platform and ElasticXL member/site limits before admitting the proposed additional appliances.

Incorrect Answers

A:

Selecting the existing Site cannot make an unsupported platform or member count valid.

B:

Member provisioning is a later step that requires the intended cluster to be supported first.

C:

SMO distribution behavior does not certify that a proposed scale-out topology is supported.

Question 197

An extended R82 management-link partition leaves both peers reporting Active with different policy revisions. Restoring connectivity immediately would overwrite one database during role correction. Before resetting the less authoritative peer, what decision must change control record?

  1. Use Management HA actions to set one server to Standby
  2. Review which database will be overwritten when setting Standby
  3. Initiate a manual synchronization between management peers
  4. Select which node remains Active before resetting its peer

Explanation

Correct Answer

D:

Choose which management peer remains Active and preserve needed divergent data before demoting its counterpart.

Incorrect Answers

A:

Setting a server Standby is the later action, but first choose the surviving authoritative database.

B:

Protecting data is essential, yet an unresolved authoritative peer choice still risks the wrong overwrite.

C:

Manual syncing two divergent Active nodes without role decision is not safe collision resolution.

Question 198

An Access Control rule refers to an Updatable Object representing a cloud provider. A provider adds addresses overnight and the gateway updates its membership without a SmartConsole policy-install task. A proposed change would be to place an Updatable Object in the Access Control Source column, which addresses the different requirement to use a dynamic external-service address as the source of a rule. Which action instead addresses the observed incident?

  1. Let the Updatable Object update on the Security Gateway
  2. Use an Updatable Object based on the service address feed
  3. Place an Updatable Object in the Access Control Source column
  4. Use an Updatable Object in Protected Scope

Explanation

Correct Answer

A:

An Updatable Object membership refresh does not require policy reinstall. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Updatable Objects follow changing externally published addresses; this does not resolve the observed condition.

C:

The Updatable Object is supported as an Access Control source, but the current evidence calls for a different R82 operation.

D:

Threat Prevention supports updatable membership for Protected Scope, yet that applies to scope Threat Prevention protections to a dynamic cloud service rather than the observed issue.

Question 199

An R82 VPN community contains a permanent tunnel and the operator needs an alert when the tunnel stops responding. Tunnel status monitoring is available, but Logs & Events shows no reaction when the remote site goes offline. What additional tunnel configuration is appropriate?

  1. Use periodic tunnel-test responses to determine up status
  2. Apply the permanent-tunnel setting to the entire community
  3. Enable permanent-tunnel tracking or alert behavior
  4. Select the particular tunnel in community Tunnel Management

Explanation

Correct Answer

C:

Configure the permanent-tunnel tracking or alert option so a lost monitored tunnel raises the intended event.

Incorrect Answers

A:

Tunnel probes are required for health measurement but cannot notify operators without tracking configured.

B:

Applying permanence to more tunnels broadens coverage without enabling alerting for the affected tunnel.

D:

Selecting a particular tunnel in Tunnel Management does not enable the missing alert reaction for the detected failure.

Question 200

Security analysts open an R82 SmartEvent detail panel, but a new enrichment field exists in logs and is absent from the event summary display. The detection definition and severity are already correct. The operator must distinguish this from a separate requirement to count distinct sources rather than raw logs for a threshold. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Save and install the updated SmartEvent Event Policy
  2. Use unique values of the desired log field when counting
  3. Edit the relevant Event Definition threshold
  4. Configure Event Format field display mapping

Explanation

Correct Answer

D:

Event Format determines which event details are displayed. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event policy installation publishes event-definition changes, yet that applies to activate user-defined event modifications after editing rather than the observed issue.

B:

Unique-field counting measures distinct source values, but the current evidence calls for a different R82 operation.

C:

The event definition controls the correlation trigger; this does not resolve the observed condition.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests