McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 21

Question 200

Security analysts open an R82 SmartEvent detail panel, but a new enrichment field exists in logs and is absent from the event summary display. The detection definition and severity are already correct. The operator must distinguish this from a separate requirement to count distinct sources rather than raw logs for a threshold. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Save and install the updated SmartEvent Event Policy
  2. Use unique values of the desired log field when counting
  3. Edit the relevant Event Definition threshold
  4. Configure Event Format field display mapping

Explanation

Correct Answer

D:

Event Format determines which event details are displayed. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event policy installation publishes event-definition changes, yet that applies to activate user-defined event modifications after editing rather than the observed issue.

B:

Unique-field counting measures distinct source values, but the current evidence calls for a different R82 operation.

C:

The event definition controls the correlation trigger; this does not resolve the observed condition.

Question 201

A gateway is scheduled for a major R82 upgrade. The change owner has confirmed the supported path but has not captured recoverable system state or checked disk prerequisites. An alternate diagnosis concerns the requirement to install packages directly from an appliance on Gaia, for which a colleague suggests use CPUSE with the applicable local/cloud package source. Based on the recorded symptoms, which corrective step should have priority?

  1. Capture a supported backup/snapshot and upgrade plan
  2. Use the Install Hotfix/Jumbo deployment action
  3. Back up the appliance and confirm the target package is supported
  4. Use CPUSE with the applicable local/cloud package source

Explanation

Correct Answer

C:

Backup and compatibility checks reduce recoverability risk. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Recovery artifacts make a failed upgrade safer to reverse, yet that applies to retain a recoverable state before a gateway OS change rather than the observed issue.

B:

Hotfix deployment targets fixes on the existing release; this does not resolve the observed condition.

D:

CPUSE performs Gaia software package installation and upgrades, but the current evidence calls for a different R82 operation.

Question 202

After the replacement R82 management database imports and services start, SmartConsole connects successfully but the owner has not checked that critical access rules or gateway objects survived. A preliminary suggestion is to publish or discard sessions with unpublished changes. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Choose management database migration rather than gateway policy reinstall
  2. Connect with SmartConsole and inspect imported configuration
  3. Back up the current management configuration first
  4. Publish or discard sessions with unpublished changes

Explanation

Correct Answer

B:

Post-import SmartConsole inspection confirms objects and policies. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management migration moves objects, settings, and policy database; this does not resolve the observed condition.

C:

The R82 migration procedure begins with source backups, yet that applies to start a management database migration with rollback protection rather than the observed issue.

D:

The migration prerequisite resolves uncommitted sessions, but the current evidence calls for a different R82 operation.

Question 203

A capacity worksheet recommends increasing R82 ElasticXL membership far beyond the current appliance count, based solely on CPU demand. The proposed new hardware platform has not been validated in the supported topology tables. A proposed change would be to add supported members through ElasticXL admission and cloning, which addresses the different requirement to scale out the cluster without changing the gateway identity. Which action instead addresses the observed incident?

  1. Review supported platform and cluster membership limits
  2. Keep SecureXL in Kernel Mode (KPPAK) and retain default CoreXL Dynamic Balancing
  3. Remove it then add as a pending member to the target site
  4. Add supported members through ElasticXL admission and cloning

Explanation

Correct Answer

A:

ElasticXL has documented platform and membership constraints. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL requires KPPAK and Check Point recommends retaining the default CoreXL Dynamic Balancing configuration, yet that applies to maintain R82-supported acceleration and default scheduling in an ElasticXL Cluster rather than the observed issue.

C:

The documented workflow removes and re-adds a node to the chosen site; this does not resolve the observed condition.

D:

ElasticXL is designed to scale membership under one gateway object, but the current evidence calls for a different R82 operation.

Question 204

A management-HA changeover is reported as complete after planned maintenance. Operators can reach both R82 servers and want to ensure that the promotion did not leave a collision. A proposed change would be to plan management-server redundancy separately from gateway clustering, which addresses the different requirement to distinguish management HA from dataplane security gateway HA. Which action instead addresses the observed incident?

  1. Initiate changeover so a healthy standby becomes Active
  2. Select which node remains Active before resetting its peer
  3. Verify exactly one Active and remaining Standby status
  4. Plan management-server redundancy separately from gateway clustering

Explanation

Correct Answer

C:

One Active peer is the expected result of controlled changeover. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

B:

Collision recovery should establish an authoritative Active node; this does not resolve the observed condition.

D:

Management HA protects the management database and administration, but the current evidence calls for a different R82 operation.

Question 205

A published web service is reachable at the correct translated public address, but inbound requests to TCP 8443 must arrive at an internal listener on TCP 443. The existing Manual NAT rule correctly matches the original source and destination addresses. The controls that address the separate requirement to publish a server using a manually translated address are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Create translated objects, NAT rule, and matching Access Control rule
  2. Create a Manual NAT rule with both translated fields
  3. Place the intended matching rule first in the NAT rule order
  4. Use the Translated Services column in a Manual NAT rule

Explanation

Correct Answer

D:

Manual NAT can translate services as well as addresses. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT workflows also require valid translated objects and access, but the current evidence calls for a different R82 operation.

B:

Manual NAT allows simultaneous source and destination translation, yet that applies to translate the source and destination IP in one connection rather than the observed issue.

C:

Only the first matching Manual NAT rule is enforced; this does not resolve the observed condition.

Question 206

A mesh VPN community has five managed Check Point gateways and operations wants every eligible inter-gateway tunnel monitored as permanent. A colleague configured permanence for only one named pair. Which community-level setting meets the comprehensive requirement?

  1. Enable permanent-tunnel tracking or alert behavior
  2. Use periodic tunnel-test responses to determine up status
  3. Use a Mesh VPN community for peer relationships
  4. Apply the permanent-tunnel setting to the entire community

Explanation

Correct Answer

D:

Set the permanent-tunnel monitoring behavior for the entire community rather than only one gateway pair.

Incorrect Answers

A:

Tracking alerts for one permanent pair does not create permanency on the other tunnel relationships.

B:

Individual tunnel tests show liveness but cannot assign permanent status to the omitted pairs.

C:

Mesh topology controls peer relationships, not which tunnels are actively monitored as permanent.

Question 207

An access alert triggers during routine approved overnight maintenance, but the compliance team only wants alerts for unauthorized out-of-hours login activity. The event should use an explicit schedule instead of continually changing thresholds. An alternate diagnosis concerns the requirement to count distinct sources rather than raw logs for a threshold, for which a colleague suggests use unique values of the desired log field when counting. Based on the recorded symptoms, which corrective step should have priority?

  1. Use unique values of the desired log field when counting
  2. Configure a Time Object for the event definition
  3. Configure a SmartEvent threshold of log count and seconds
  4. Deploy and configure SmartEvent event correlation

Explanation

Correct Answer

B:

SmartEvent can use time objects for working-hours events. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Unique-field counting measures distinct source values, but the current evidence calls for a different R82 operation.

C:

SmartEvent threshold combines frequency and interval, yet that applies to create an alert after repeated matching logs in a time window rather than the observed issue.

D:

SmartEvent correlates log patterns into events; this does not resolve the observed condition.

Question 208

An R82 Security Gateway must move to a specifically approved major release, while its current Jumbo Hotfix is already adequate. The change must run remotely through supported Central Deployment. A preliminary suggestion is to use supported Central Deployment parallel target selection. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Use Central Deployment Version Upgrade to Specific Major Version
  2. Use supported Central Deployment parallel target selection
  3. Review the package installation and gateway version result
  4. Use SmartConsole Central Deployment where supported

Explanation

Correct Answer

A:

Central Deployment offers target-version selection. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Central Deployment can process several supported targets, but the current evidence calls for a different R82 operation.

C:

Actual installed version proves the deployment target state, yet that applies to validate installed hotfix levels after deployment rather than the observed issue.

D:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

Question 209

A Security Management Server must be replaced with a new machine while retaining its policies, objects and database. The target will receive a clean supported R82 installation, rather than updating the source host in place. A proposed change would be to connect the new management host on the intended network, which addresses the different requirement to bring the replacement management server online after import. Which action instead addresses the observed incident?

  1. Connect the new management host on the intended network
  2. Use Upgrade with Migration for new-server clean-install cutover
  3. Perform a supported clean installation of R82 on the target
  4. Disconnect the retired source before activating its replacement

Explanation

Correct Answer

B:

Migration exports management state and imports to a separate target. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The new server needs appropriate network connectivity to manage gateways, but the current evidence calls for a different R82 operation.

C:

A clean R82 target is a documented migration destination, yet that applies to prepare the target machine for a management migration rather than the observed issue.

D:

Controlled cutover prevents conflicting management authorities; this does not resolve the observed condition.

Question 210

A policy change is approved for an ElasticXL cluster with several physical members. The team sees only one logical cluster gateway object in R82 SmartConsole but wants to install separate unrelated rulebases on each appliance. The controls that address the separate requirement to distribute the first member software to newly joined nodes are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Install policy on the cluster single gateway object
  2. Allow the automatic image/configuration clone from SMO
  3. Use Gaia Portal Cluster Management Actions > Delete
  4. Add supported members through ElasticXL admission and cloning

Explanation

Correct Answer

A:

The SMO represents the entire cluster for policy management. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL copies the SMO image and settings to added members, but the current evidence calls for a different R82 operation.

C:

Cluster Management supports member removal; this does not resolve the observed condition.

D:

ElasticXL is designed to scale membership under one gateway object, yet that applies to scale out the cluster without changing the gateway identity rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests