McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 24

Question 230

The old management system exported its R82 database and the archive was copied to the new cleanly installed target. The target operator accidentally starts another export rather than loading the archive. An alternate diagnosis concerns the requirement to move an R82 Management Server database to another R82 host, for which a colleague suggests export on the source and import on the destination. Based on the recorded symptoms, which corrective step should have priority?

  1. Export on the source and import on the destination
  2. Invoke migrate_server import for the exported archive
  3. Check imported policies, objects, and management settings
  4. Invoke migrate_server export from the prescribed scripts directory

Explanation

Correct Answer

B:

The migration import restores the exported management database. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management migration preserves the database through export/import, but the current evidence calls for a different R82 operation.

C:

Database content inspection tests the outcome of a migration; this does not resolve the observed condition.

D:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

Question 231

An R82 ElasticXL site operates normally until a technician adds a spare unassigned interface into the existing Sync bond for a cabling test. Member detection becomes intermittent and packets are dropped even though production uplinks stay up. A preliminary suggestion is to remove it then add as a pending member to the target site. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Remove it then add as a pending member to the target site
  2. Wire data interfaces to traffic networks and Sync ports to sync domain
  3. Connect Sync ports through dedicated Layer 2 switching or VLAN
  4. Do not add or remove an unassigned Sync-bond interface casually

Explanation

Correct Answer

D:

Changing unassigned Sync bond members can reset required flags. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The documented workflow removes and re-adds a node to the chosen site, but the current evidence calls for a different R82 operation.

B:

ElasticXL uses separate data ports and synchronization connectivity; this does not resolve the observed condition.

C:

ElasticXL Sync requires a shared suitable Layer 2 domain, yet that applies to provide the transport for cluster member synchronization rather than the observed issue.

Question 232

The Active R82 Management Server fails and is confirmed offline. The Standby is synchronized and reachable by administrators. Security Gateways continue using the installed policy, but urgent management changes are required. An alternate diagnosis concerns the requirement to unlock an administrator locked only on a standby node, for which a colleague suggests run the unlock-administrator API action on that Standby Server. Based on the recorded symptoms, which corrective step should have priority?

  1. Use the Active Management Server for write operations
  2. Verify exactly one Active and remaining Standby status
  3. Initiate changeover so a healthy standby becomes Active
  4. Run the unlock-administrator API action on that Standby Server

Explanation

Correct Answer

C:

A controlled management changeover restores an Active management server. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Only the Active server accepts normal management changes, yet that applies to make configuration changes while the management pair remains healthy rather than the observed issue.

B:

One Active peer is the expected result of controlled changeover; this does not resolve the observed condition.

D:

A standby-only lock can require local API action on that node, but the current evidence calls for a different R82 operation.

Question 233

The remote R82 gateways must contact a management server at one stable translated address, while the management host retains its original private IP. The managed network device performing translation is already identified. A proposed change would be to match Original Services and set corresponding Translated Services, which addresses the different requirement to apply different port translation only to selected services. Which action instead addresses the observed incident?

  1. Create translated objects, NAT rule, and matching Access Control rule
  2. Configure required Proxy ARP entries for the translated address
  3. Match Original Services and set corresponding Translated Services
  4. Configure the Management Server object NAT settings for Static translation

Explanation

Correct Answer

D:

Management-object NAT defines the externally reachable translated address. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT workflows also require valid translated objects and access, yet that applies to publish a server using a manually translated address rather than the observed issue.

B:

Manual NAT deployments require Proxy ARP where applicable; this does not resolve the observed condition.

C:

Manual NAT can restrict rules by service and translated port, but the current evidence calls for a different R82 operation.

Question 234

After a new ISP circuit is added, traffic in an R82 VPN community unexpectedly negotiates from a backup WAN interface. The peer has pinned the primary public address. Routing is valid and IKE proposals match. Which comparison will isolate the mismatch?

  1. Configure the gateway Link Selection settings
  2. Review Service Based Link Selection policies
  3. Confirm chosen local interface and peer-advertised address
  4. Review IKE negotiation settings and authentication on both peers

Explanation

Correct Answer

C:

Compare the chosen local VPN interface with the address advertised to the remote peer in VPN Link Selection.

Incorrect Answers

A:

Changing Link Selection before identifying the observed mismatch risks masking the real egress choice.

B:

Service-based selection applies only if service-sensitive egress policy is the cause, which is not shown.

D:

IKE proposal diagnostics are unnecessary when source-address identity, not IKE authentication, is mismatched.

Question 235

A malicious-download SmartEvent definition is already detecting incidents and writing event records. The SOC manager now requires an automatic operator notification on each critical match, without modifying detection thresholds. The operator must distinguish this from a separate requirement to focus on logins outside permitted working hours. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Deploy and configure SmartEvent event correlation
  2. Configure the relevant SmartEvent alert reaction
  3. Configure a Time Object for the event definition
  4. Adjust its event threshold after examining the event

Explanation

Correct Answer

B:

Event alerts are implemented in SmartEvent reactions. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartEvent correlates log patterns into events; this does not resolve the observed condition.

C:

SmartEvent can use time objects for working-hours events, but the current evidence calls for a different R82 operation.

D:

Tuning event thresholds reduces false-positive correlation, yet that applies to reduce false alerts for a noisy SmartEvent definition rather than the observed issue.

Question 236

A SmartConsole Central Deployment task remains blocked before package verification. The management server cannot reach the chosen gateway, although the package exists in its repository. The job is not a policy-install problem. An alternate diagnosis concerns the requirement to schedule centrally coordinated gateway software changes, for which a colleague suggests use the Gateway & Servers deployment actions in SmartConsole. Based on the recorded symptoms, which corrective step should have priority?

  1. Check Management Server connectivity to selected gateways
  2. Use the Gateway & Servers deployment actions in SmartConsole
  3. Use SmartConsole Central Deployment where supported
  4. Run the Central Deployment Tool from the Management Server

Explanation

Correct Answer

A:

Remote deployment depends on control connectivity to targets. This directly addresses the documented incident evidence.

Incorrect Answers

B:

SmartConsole exposes centrally managed software deployment actions, but the current evidence calls for a different R82 operation.

C:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

D:

CDT uses the Management Server to deploy to gateways, yet that applies to decide where CDT runs when upgrading remote gateways rather than the observed issue.

Question 237

A security team is doing an R82 Advanced Upgrade where existing management data must survive through a target host replacement. The administrator proposes deleting the old database after gateway policies install. A preliminary suggestion is to verify license state on the destination with cplic print. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Export the management database before upgrading and re-import afterward
  2. Invoke migrate_server export from the prescribed scripts directory
  3. Verify license state on the destination with cplic print
  4. Invoke migrate_server import for the exported archive

Explanation

Correct Answer

A:

Advanced Upgrade preserves state through export and import. This directly addresses the documented incident evidence.

Incorrect Answers

B:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

C:

License validation is part of the documented import preparation, but the current evidence calls for a different R82 operation.

D:

The migration import restores the exported management database; this does not resolve the observed condition.

Question 238

A newly admitted R82 ElasticXL appliance boots with an empty local configuration and the initial site SMO has the approved image and cluster configuration. An engineer wants to configure each new member independently by hand. A proposed change would be to install policy on the cluster single gateway object, which addresses the different requirement to apply a security policy to an ElasticXL cluster. Which action instead addresses the observed incident?

  1. Expect the SMO to accept and distribute traffic to members
  2. Install policy on the cluster single gateway object
  3. Inspect /var/log/lightshot.log on the relevant member
  4. Allow the automatic image/configuration clone from SMO

Explanation

Correct Answer

D:

ElasticXL copies the SMO image and settings to added members. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The SMO handles distribution to other site members, yet that applies to verify the distribution architecture within one site rather than the observed issue.

B:

The SMO represents the entire cluster for policy management, but the current evidence calls for a different R82 operation.

C:

The lightshot log documents SMO snapshot and image cloning; this does not resolve the observed condition.

Question 239

A design document proposes placing two R82 Management Servers in HA and then removing the Security Gateway ClusterXL pair because management is now redundant. Both gateways carry production traffic. A proposed change would be to use Management High Availability database synchronization, which addresses the different requirement to keep policy and network-object definitions consistent across peers. Which action instead addresses the observed incident?

  1. Use Management High Availability database synchronization
  2. Initiate changeover so a healthy standby becomes Active
  3. Plan management-server redundancy separately from gateway clustering
  4. Use the Active Management Server for write operations

Explanation

Correct Answer

C:

Management HA protects the management database and administration. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Management HA synchronizes the management databases and revisions, but the current evidence calls for a different R82 operation.

B:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

D:

Only the Active server accepts normal management changes; this does not resolve the observed condition.

Question 240

An internal migration needs a static address translation only for inbound sessions to one legacy server. The team must avoid creating a symmetric outbound mapping for every flow. A proposed change would be to create a Manual NAT rule matching the specified address pair, which addresses the different requirement to restrict address translation to a specific source and destination. Which action instead addresses the observed incident?

  1. Create a Manual NAT rule matching the specified address pair
  2. Create an appropriate one-direction Manual NAT policy rule
  3. Place the intended matching rule first in the NAT rule order
  4. Use the Translated Services column in a Manual NAT rule

Explanation

Correct Answer

B:

Manual NAT supports direction-specific static translation. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT can match both original source and destination, but the current evidence calls for a different R82 operation.

C:

Only the first matching Manual NAT rule is enforced; this does not resolve the observed condition.

D:

Manual NAT can translate services as well as addresses, yet that applies to translate the destination service port for one published server rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests