McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 18

Question 170

An R82 firewall policy change includes two new Manual NAT rules and an updated associated Access Control rule. SmartConsole still shows the session unpublished; the gateway continues enforcing the previous installed policy. Which deployment step makes the changes effective?

  1. Open Security Policies > Access Control > NAT
  2. Publish the session and install the relevant security policy
  3. Create translated objects, NAT rule, and matching Access Control rule
  4. Place the intended matching rule first in the NAT rule order

Explanation

Correct Answer

B:

Publish the SmartConsole session and install the relevant security policy on the target gateway.

Incorrect Answers

A:

Navigating to the NAT rulebase does not publish an administrator session or install policy.

C:

Creating translated objects and rules is already complete, but cannot reach gateways without policy installation.

D:

Reordering manual rules only changes match precedence, not the absent publish/install step.

Question 171

A headquarters R82 gateway must be the central encrypted transit point for three branches. The branches should not build arbitrary direct site-to-site tunnels, and all protected subnets use headquarters as a hub. The operator must distinguish this from a separate requirement to authenticate a third-party IPsec peer with a shared secret. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Use a Mesh VPN community for peer relationships
  2. Configure both gateways in the appropriate Site-to-Site VPN community
  3. Use a Star VPN community with the hub as center
  4. Configure matching pre-shared keys on both VPN peers

Explanation

Correct Answer

C:

A Star community models branch-to-center connectivity. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A Mesh model supports direct relationships among participating members; this does not resolve the observed condition.

B:

Site-to-Site communities define gateway membership and tunnel policy, yet that applies to protect traffic between two managed security gateways rather than the observed issue.

D:

Both sides need consistent configured IKE authentication secrets, but the current evidence calls for a different R82 operation.

Question 172

An R82 SmartEvent rule correctly identifies a pattern but fires after only two occurrences, while the SOC requires an alert after a higher number within the same time window. The event logic and reaction should stay unchanged. Which control changes this activation count?

  1. Assign appropriate SmartEvent event severity
  2. Configure the relevant SmartEvent alert reaction
  3. Save and install the updated SmartEvent Event Policy
  4. Edit the relevant Event Definition threshold

Explanation

Correct Answer

D:

Edit the matching Event Definition threshold to require the desired count within the configured interval.

Incorrect Answers

A:

Event severity changes the incident priority, not the number of occurrences required by this detection rule.

B:

An alert reaction determines notifications but does not change the Event Definition threshold or event count.

C:

Installing the existing Event Policy without updating the threshold cannot change the activation count.

Question 173

A managed R82 gateway must receive a security fix without moving to a newer major software release. A colleague selects Version Upgrade and proposes changing the gateway object version. What installation choice satisfies the narrower requirement?

  1. Use the Version Upgrade action on the selected gateway
  2. Use CPUSE for a compatible management-server in-place upgrade
  3. Use the Install Hotfix/Jumbo deployment action
  4. Use supported Central Deployment parallel target selection

Explanation

Correct Answer

C:

Choose Install Hotfix/Jumbo rather than Version Upgrade to apply a compatible same-release fix.

Incorrect Answers

A:

A major Version Upgrade changes the release level beyond the requested hotfix scope.

B:

Management-server CPUSE upgrade procedures target another host role rather than this gateway hotfix.

D:

Parallel target scheduling does not distinguish a major version upgrade from an in-release hotfix.

Question 174

A security team is doing an R82 Advanced Upgrade where existing management data must survive through a target host replacement. The administrator proposes deleting the old database after gateway policies install. What migration sequence retains the existing rulebase?

  1. Invoke migrate_server export from the prescribed scripts directory
  2. Export the management database before upgrading and re-import afterward
  3. Invoke migrate_server import for the exported archive
  4. Back up the current management configuration first

Explanation

Correct Answer

B:

Export the source management database before cutover and import it into the supported target installation.

Incorrect Answers

A:

Source migrate_server export alone is incomplete because the replacement host still needs to import that archive.

C:

Running an import with no prior source export cannot recover management data deleted before migration.

D:

A backup is prudent but does not substitute for executing the actual export-and-import sequence.

Question 175

A new capacity requirement calls for another supported appliance in the existing R82 ElasticXL cluster. The Security Management Server should still see one logical gateway identity and existing policy. Which supported scaling path respects that invariant?

  1. Create a new Site while admitting the pending appliance
  2. Add supported members through ElasticXL admission and cloning
  3. Create one Single Management Object for the entire cluster
  4. Use Gaia Portal Cluster Management Actions > Delete

Explanation

Correct Answer

B:

Admit the appliance through ElasticXL member provisioning and cloning without creating new gateway identities.

Incorrect Answers

A:

Creating a new Site would change the intended existing-site topology rather than scale that site.

C:

A new logical gateway object would split the cluster into independent managed appliances.

D:

Deleting members reduces capacity and cannot satisfy the requested scale-out.

Question 176

The failed management HA link has been repaired and SIC tests succeed again. The standby peer was isolated for several published policy revisions; SmartConsole now shows it is behind but still Standby. What completes recovery without changing which peer stays Active?

  1. Initiate changeover so a healthy standby becomes Active
  2. Check connectivity between management servers first
  3. Confirm peer state and re-synchronize management databases
  4. Back up or snapshot all HA servers at the same point in time

Explanation

Correct Answer

C:

Reconfirm peer roles and synchronize the management databases so the recovered Standby receives the missing revisions.

Incorrect Answers

A:

Promoting the standby would alter healthy roles rather than catch up its database.

B:

Basic connectivity alone cannot transfer the management revisions missed during the outage.

D:

Backups preserve a point in time but do not replay published changes to the peer.

Question 177

An operator is editing an R82 Access Control allow rule and wants to specify a destination service-port translation. The Access Control rule editor has no Translated Services column. Which SmartConsole location contains that field?

  1. Use the Translated Services column in a Manual NAT rule
  2. Publish the session and install the relevant security policy
  3. Create a Manual NAT rule with both translated fields
  4. Open Security Policies > Access Control > NAT

Explanation

Correct Answer

D:

Open Security Policies, Access Control, NAT and edit a Manual NAT rule with Translated Services.

Incorrect Answers

A:

A service-port translation setting exists in Manual NAT, not merely the Access Control allow rule.

B:

Publishing the unchanged Access Control rule does not create a missing NAT port mapping.

C:

Translating IP addresses alone cannot express the requested destination service-port rewrite.

Question 178

The R82 gateway is configured for a third-party IPsec peer using a pre-shared secret. Both ends agree on IKE version and algorithms, but logs show authentication failure after the partner rotated its shared key. An alternate diagnosis concerns the requirement to authenticate a third-party VPN peer with certificates, for which a colleague suggests configure accepted peer certificates and trusted issuing authority. Based on the recorded symptoms, which corrective step should have priority?

  1. Configure accepted peer certificates and trusted issuing authority
  2. Configure matching pre-shared keys on both VPN peers
  3. Verify phase-two traffic selectors and matching policy rules
  4. Review IKE negotiation settings and authentication on both peers

Explanation

Correct Answer

B:

Both sides need consistent configured IKE authentication secrets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Certificate authentication relies on valid identities and trust, but the current evidence calls for a different R82 operation.

C:

Data associations still need matching selectors and permitted traffic; this does not resolve the observed condition.

D:

IKE agreement and authentication are prerequisites for tunnel setup, yet that applies to troubleshoot a VPN tunnel failing before security associations form rather than the observed issue.

Question 179

A new R82 user-defined SmartEvent correlation and reaction was saved in the management editor, but an intentionally generated matching test event is still evaluated under the previous rules. The team confirmed the new definition is not installed. What should be done?

  1. Save and install the updated SmartEvent Event Policy
  2. Deploy and configure SmartEvent event correlation
  3. Adjust its event threshold after examining the event
  4. Configure the relevant SmartEvent alert reaction

Explanation

Correct Answer

A:

Install the modified SmartEvent Event Policy after saving so the event engine uses the new correlation settings.

Incorrect Answers

B:

Designing correlation alone does not activate an uninstalled Event Policy revision.

C:

Changing thresholds would alter content but leave the new policy uninstalled.

D:

Adding alert reactions is already done; deployment is the missing enforcement step.

Question 180

The central operations team wants to schedule supported software maintenance for a cluster through SmartConsole and track it in Tasks. A new Access Control policy is not the deliverable. Which managed deployment interface should the operator use?

  1. Select gateways in SmartConsole and Install Hotfix/Jumbo
  2. Run the Central Deployment Tool from the Management Server
  3. Use the Gateway & Servers deployment actions in SmartConsole
  4. Use the Version Upgrade action on the selected gateway

Explanation

Correct Answer

C:

Use the Gateways & Servers deployment Actions for the selected gateway or full cluster target.

Incorrect Answers

A:

Installing an arbitrary hotfix is premature until the maintenance action and package are selected.

B:

CDT execution may be available but is not the GUI workflow specified for this change.

D:

Version Upgrade is only one possible action and should not be selected without a version change.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests