Question 50
At a telecommunications exchange in Dallas, two physical uplinks to the same switch stack require a single logical firewall data interface. The change affects voice services. What outcome directly proves this configuration works?
Explanation
Correct Answer
At a telecommunications exchange in Dallas, this verifies the specific aggregate ethernet interfaces requirement rather than merely recording an intended configuration: The logical AE remains operational after one member link is disabled and forwarding uses the surviving member. The associated implementation is: create an aggregate Ethernet interface and assign supported members with matched switch-side bundling.
Incorrect Answers
The offered observation would confirm the separate intervention: Align the firewall and switch LACP settings and compatible member parameters. It measures: The affected port joins the intended aggregate and interface counters advance on that member. The current aggregate ethernet interfaces configuration is Create an aggregate Ethernet interface and assign supported members with matched switch-side bundling, and must demonstrate: The logical AE remains operational after one member link is disabled and forwarding uses the surviving member. The two acceptance checks are not interchangeable even though they share a feature area.
That observation measures management interface after this other intervention: Configure the dedicated management interface addressing and permitted management access separately from data ports. Its result is: The approved jump host reaches the management plane while ordinary user segments do not. The requested aggregate ethernet interfaces change is Create an aggregate Ethernet interface and assign supported members with matched switch-side bundling, which must demonstrate: The logical AE remains operational after one member link is disabled and forwarding uses the surviving member. The offered evidence does not validate the specified control.
The offered observation would confirm the separate intervention: Add a suitable aggregate Ethernet Layer 3 subinterface for the VLAN and bind its router and zone. It measures: The tagged VLAN is routed through the aggregate subinterface and member ports do not have conflicting routed IP settings. The current aggregate ethernet interfaces configuration is Create an aggregate Ethernet interface and assign supported members with matched switch-side bundling, and must demonstrate: The logical AE remains operational after one member link is disabled and forwarding uses the surviving member. The two acceptance checks are not interchangeable even though they share a feature area.