McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 32

Question 310

At Cresthaven Energy Services, while planning a link-failure test, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which result would establish that the original defect has been corrected?

  1. The test destination is reached while the blackhole action is absent from the route
  2. Tenant route tables exclude the management network while underlay reachability remains
  3. BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction
  4. The interface is up and its expected control-plane session establishes

Explanation

Correct Answer

A:

At Cresthaven Energy Services, while planning a link-failure test, this result is the relevant closure evidence: The test destination is reached while the blackhole action is absent from the route. It checks the effect of: Remove the unintended discard action and install the approved reachable next-hop group. The underlying issue was: An unintended discard next-hop or blackhole action was selected.

Incorrect Answers

B:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Tenant route tables exclude the management network while underlay reachability remains. Using that approach would investigate A leaf exports its connected management subnet into tenant-visible fabric routing instead. No evidence for that separate failure is supplied here; the reported case is consistent with: An unintended discard next-hop or blackhole action was selected.

C:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction. The alternative focuses on BFD connectivity or session parameters are incompatible across the peer pair, not on the stated defect. For this scenario the expected acceptance result would be: The test destination is reached while the blackhole action is absent from the route.

D:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: The interface is up and its expected control-plane session establishes. This option assumes the other problem (A routing incident is blamed on BGP even though an interface has no operational carrier) is present. The case instead describes A static route sends production traffic into a blackhole after an emergency change, for which the causal issue is An unintended discard next-hop or blackhole action was selected.

Question 311

At Cresthaven Energy Services, while planning a link-failure test, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which root cause fits the reported state?

  1. IPv6 family activation or transport address configuration is missing on that adjacency
  2. The two sides disagree on the expected remote AS number
  3. BFD connectivity or session parameters are incompatible across the peer pair
  4. An unintended discard next-hop or blackhole action was selected

Explanation

Correct Answer

D:

At Cresthaven Energy Services, while planning a link-failure test, an unintended discard next-hop or blackhole action was selected. That is the cause of the described failure, and a corrective check should demonstrate: The test destination is reached while the blackhole action is absent from the route.

Incorrect Answers

A:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: IPv6 family activation or transport address configuration is missing on that adjacency. Using that approach would investigate An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails instead. No evidence for that separate failure is supplied here; the reported case is consistent with: An unintended discard next-hop or blackhole action was selected.

B:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: The two sides disagree on the expected remote AS number. The alternative focuses on The two sides disagree on the expected remote AS number, not on the stated defect. For this scenario the expected acceptance result would be: The test destination is reached while the blackhole action is absent from the route.

C:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: BFD connectivity or session parameters are incompatible across the peer pair. This option assumes the other problem (A BFD session shows Down while the BGP peer continues waiting for its normal hold timer) is present. The case instead describes A static route sends production traffic into a blackhole after an emergency change, for which the causal issue is An unintended discard next-hop or blackhole action was selected.

Question 312

At Cresthaven Energy Services, while planning a link-failure test, the data center fabric team observes: A static route sends production traffic into a blackhole after an emergency change. Which recurring validation best prevents this failure mode?

  1. Maintain explicit management-prefix exclusion tests
  2. Record negative and positive route-policy fixtures in change validation
  3. Include discard-route inspection before promoting static changes
  4. Check data-plane path programming whenever peer counts change

Explanation

Correct Answer

C:

At Cresthaven Energy Services, while planning a link-failure test, for Cresthaven Energy Services, include the safeguard: Include discard-route inspection before promoting static changes. It reduces repeat risk from the original mechanism and complements a validation of: The test destination is reached while the blackhole action is absent from the route.

Incorrect Answers

A:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Maintain explicit management-prefix exclusion tests. The alternative focuses on The route export policy fails to distinguish infrastructure and tenant prefixes, not on the stated defect. For this scenario the expected acceptance result would be: The test destination is reached while the blackhole action is absent from the route.

B:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Record negative and positive route-policy fixtures in change validation. This option assumes the other problem (A leaf receives an underlay route but it is rejected from the active routing table) is present. The case instead describes A static route sends production traffic into a blackhole after an emergency change, for which the causal issue is An unintended discard next-hop or blackhole action was selected.

D:

At Cresthaven Energy Services, while planning a link-failure test, this option proposes: Check data-plane path programming whenever peer counts change. The option describes a different failure mode: A network engineer assumes multiple BGP peers automatically imply load-balanced traffic. It would address The active forwarding table has only one selected path despite several control-plane peers, but here the case reports A static route sends production traffic into a blackhole after an emergency change. The current required evidence is: The test destination is reached while the blackhole action is absent from the route.

Question 313

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, the data center fabric team observes: A leaf's BGP session resets repeatedly after a minor interface disturbance. Which targeted adjustment best corrects this behavior?

  1. Restore physical interface health and then review peer and route state
  2. Configure the required IPv6 address family and approved prefix advertisements
  3. Correct the next-hop-group membership and adjacency reachability
  4. Tune approved BFD timing based on measured path stability and redundancy needs

Explanation

Correct Answer

D:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, the targeted correction is: Tune approved BFD timing based on measured path stability and redundancy needs. The reported symptom is explained by: BFD detection values are too aggressive for the observed link characteristics. Confirm the change by testing this outcome: The session stays stable during acceptable variations and detects actual link failure within objective.

Incorrect Answers

A:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: Restore physical interface health and then review peer and route state. It tests a different symptom: A routing incident is blamed on BGP even though an interface has no operational carrier. For the observed case, the relevant distinction is BFD detection values are too aggressive for the observed link characteristics, with verification: The session stays stable during acceptable variations and detects actual link failure within objective.

B:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: Configure the required IPv6 address family and approved prefix advertisements. The option describes a different failure mode: An underlay peer advertises only IPv4 while an expected IPv6 reachability test fails. It would address IPv6 family activation or transport address configuration is missing on that adjacency, but here the case reports A leaf's BGP session resets repeatedly after a minor interface disturbance. The current required evidence is: The session stays stable during acceptable variations and detects actual link failure within objective.

C:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: Correct the next-hop-group membership and adjacency reachability. That choice would be more relevant when this different symptom occurs: A static default route appears in configuration but never forwards traffic. The present scenario instead points to: BFD detection values are too aggressive for the observed link characteristics. The correct resolution has its own verification outcome: The session stays stable during acceptable variations and detects actual link failure within objective.

Question 314

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, the data center fabric team observes: A leaf's BGP session resets repeatedly after a minor interface disturbance. What observation should be required before this case is closed?

  1. An end-to-end test succeeds with routes present in both forward and return directions
  2. A policy test exports required fabric routes but denies representative tenant prefixes
  3. The session stays stable during acceptable variations and detects actual link failure within objective
  4. The route appears in the target tenant or underlay table and not elsewhere

Explanation

Correct Answer

C:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, the decisive validation is: The session stays stable during acceptable variations and detects actual link failure within objective. It verifies that the change (Tune approved BFD timing based on measured path stability and redundancy needs) resolved the mechanism: BFD detection values are too aggressive for the observed link characteristics.

Incorrect Answers

A:

The fabric edge lacks a route toward the external destination or the return subnet, but here the case reports A leaf's BGP session resets repeatedly after a minor interface disturbance. Here, bFD detection values are too aggressive for the observed link characteristics.

B:

A route policy intended to permit fabric loopbacks inadvertently permits all tenant prefixes. Here, bFD detection values are too aggressive for the observed link characteristics.

D:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: The route appears in the target tenant or underlay table and not elsewhere. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The BGP or static route belongs to an incorrect network instance. The evidence in the current case requires a different result: The session stays stable during acceptable variations and detects actual link failure within objective.

Question 315

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, the data center fabric team observes: A leaf's BGP session resets repeatedly after a minor interface disturbance. What causal finding should the investigation prioritize?

  1. An unintended discard next-hop or blackhole action was selected
  2. BFD detection values are too aggressive for the observed link characteristics
  3. The remaining path was omitted from routing adjacencies or next-hop eligibility
  4. The fabric edge lacks a route toward the external destination or the return subnet

Explanation

Correct Answer

B:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, the specific mechanism is: BFD detection values are too aggressive for the observed link characteristics. It explains the reported state: A leaf's BGP session resets repeatedly after a minor interface disturbance. The targeted corrective action is: Tune approved BFD timing based on measured path stability and redundancy needs.

Incorrect Answers

A:

A static route sends production traffic into a blackhole after an emergency change. Here, bFD detection values are too aggressive for the observed link characteristics.

C:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: The remaining path was omitted from routing adjacencies or next-hop eligibility. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: The remaining path was omitted from routing adjacencies or next-hop eligibility. The evidence in the current case requires a different result: The session stays stable during acceptable variations and detects actual link failure within objective.

D:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: The fabric edge lacks a route toward the external destination or the return subnet. Using that approach would investigate A new server subnet cannot reach external routed services although its gateway replies instead. No evidence for that separate failure is supplied here; the reported case is consistent with: BFD detection values are too aggressive for the observed link characteristics.

Question 316

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, the data center fabric team observes: A leaf's BGP session resets repeatedly after a minor interface disturbance. What ongoing operational safeguard directly addresses this root issue?

  1. Monitor next-hop resolution, not merely static-route configuration presence
  2. Include discard-route inspection before promoting static changes
  3. Validate representative prefix membership before installing static entries
  4. Review fast-detection timers against real network jitter and loss

Explanation

Correct Answer

D:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, use this repeatable control: Review fast-detection timers against real network jitter and loss. Its scope is the problem (BFD detection values are too aggressive for the observed link characteristics), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: Monitor next-hop resolution, not merely static-route configuration presence. This is a valid category of fabric maintenance for another scenario (A static default route appears in configuration but never forwards traffic), not the targeted action for Harborstone Digital Commerce. The distinction is the actual cause: BFD detection values are too aggressive for the observed link characteristics.

B:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: Include discard-route inspection before promoting static changes. Although related to Underlay routing, BGP, BFD and ECMP, the proposed change fits another mechanism: An unintended discard next-hop or blackhole action was selected. The evidence in the current case requires a different result: The session stays stable during acceptable variations and detects actual link failure within objective.

C:

At Harborstone Digital Commerce, while validating IPv4 and IPv6 route state, this option proposes: Validate representative prefix membership before installing static entries. Using that approach would investigate An engineer configures a static route destination as a host when an entire subnet is needed instead. No evidence for that separate failure is supplied here; the reported case is consistent with: BFD detection values are too aggressive for the observed link characteristics.

Question 317

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, the data center fabric team observes: A route remains installed after its intended physical next hop fails. Which supported remediation most directly addresses the stated failure?

  1. Correct the approved fabric edge route exchange and return-path policy
  2. Check peer BFD configuration and physical path before adjusting detection policy
  3. Commit and verify persistent underlay routing configuration prior to controlled reboot
  4. Review next-hop resolution and use appropriate tracked or dynamic routing for failover

Explanation

Correct Answer

D:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, the targeted correction is: Review next-hop resolution and use appropriate tracked or dynamic routing for failover. The reported symptom is explained by: The static next hop is not being withdrawn or tracked through a supported reachability mechanism. Confirm the change by testing this outcome: The failed path leaves the forwarding set while a healthy path remains selected.

Incorrect Answers

A:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Correct the approved fabric edge route exchange and return-path policy. Using that approach would investigate A new server subnet cannot reach external routed services although its gateway replies instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The static next hop is not being withdrawn or tracked through a supported reachability mechanism.

B:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Check peer BFD configuration and physical path before adjusting detection policy. The alternative focuses on BFD connectivity or session parameters are incompatible across the peer pair, not on the stated defect. For this scenario the expected acceptance result would be: The failed path leaves the forwarding set while a healthy path remains selected.

C:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Commit and verify persistent underlay routing configuration prior to controlled reboot. This option assumes the other problem (An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit) is present. The case instead describes A route remains installed after its intended physical next hop fails, for which the causal issue is The static next hop is not being withdrawn or tracked through a supported reachability mechanism.

Question 318

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, the data center fabric team observes: A route remains installed after its intended physical next hop fails. Which evidence directly validates the intended repair?

  1. The failed path leaves the forwarding set while a healthy path remains selected
  2. The BGP TCP session establishes and the peer reaches the expected state
  3. BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction
  4. Approved routes traverse the intended boundary without accepting unrelated AS paths

Explanation

Correct Answer

A:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this result is the relevant closure evidence: The failed path leaves the forwarding set while a healthy path remains selected. It checks the effect of: Review next-hop resolution and use appropriate tracked or dynamic routing for failover. The underlying issue was: The static next hop is not being withdrawn or tracked through a supported reachability mechanism.

Incorrect Answers

B:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: The BGP TCP session establishes and the peer reaches the expected state. This option assumes the other problem (Two fabric peers have BGP configured but the session stays Idle with no TCP connection) is present. The case instead describes A route remains installed after its intended physical next hop fails, for which the causal issue is The static next hop is not being withdrawn or tracked through a supported reachability mechanism.

C:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: BFD establishes and a controlled path failure triggers the intended rapid adjacency reaction. It tests a different symptom: A BFD session shows Down while the BGP peer continues waiting for its normal hold timer. For the observed case, the relevant distinction is The static next hop is not being withdrawn or tracked through a supported reachability mechanism, with verification: The failed path leaves the forwarding set while a healthy path remains selected.

D:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Approved routes traverse the intended boundary without accepting unrelated AS paths. The option describes a different failure mode: A network team reuses private ASNs but forgets the peer policy needed at a domain boundary. It would address The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology, but here the case reports A route remains installed after its intended physical next hop fails. The current required evidence is: The failed path leaves the forwarding set while a healthy path remains selected.

Question 319

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, the data center fabric team observes: A route remains installed after its intended physical next hop fails. Which underlying mechanism best accounts for this symptom?

  1. Troubleshooting began at the protocol layer without validating lower-layer status
  2. The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology
  3. BFD detection values are too aggressive for the observed link characteristics
  4. The static next hop is not being withdrawn or tracked through a supported reachability mechanism

Explanation

Correct Answer

D:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, the static next hop is not being withdrawn or tracked through a supported reachability mechanism. That is the cause of the described failure, and a corrective check should demonstrate: The failed path leaves the forwarding set while a healthy path remains selected.

Incorrect Answers

A:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Troubleshooting began at the protocol layer without validating lower-layer status. This option assumes the other problem (A routing incident is blamed on BGP even though an interface has no operational carrier) is present. The case instead describes A route remains installed after its intended physical next hop fails, for which the causal issue is The static next hop is not being withdrawn or tracked through a supported reachability mechanism.

B:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: The external BGP adjacency's accepted AS-path behavior was not reviewed for the topology. It tests a different symptom: A network team reuses private ASNs but forgets the peer policy needed at a domain boundary. For the observed case, the relevant distinction is The static next hop is not being withdrawn or tracked through a supported reachability mechanism, with verification: The failed path leaves the forwarding set while a healthy path remains selected.

C:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: BFD detection values are too aggressive for the observed link characteristics. The option describes a different failure mode: A leaf's BGP session resets repeatedly after a minor interface disturbance. It would address BFD detection values are too aggressive for the observed link characteristics, but here the case reports A route remains installed after its intended physical next hop fails. The current required evidence is: The failed path leaves the forwarding set while a healthy path remains selected.

Question 320

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, the data center fabric team observes: A route remains installed after its intended physical next hop fails. Which review gate should be added to prevent the same error?

  1. Include post-reboot persistence in routing change acceptance
  2. Exercise next-hop failure against all critical static routes
  3. Capture selected next hops before and after routing policy deployment
  4. Check data-plane path programming whenever peer counts change

Explanation

Correct Answer

B:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, exercise next-hop failure against all critical static routes. This ongoing review specifically addresses: The static next hop is not being withdrawn or tracked through a supported reachability mechanism. It should remain part of change acceptance, not only incident closure.

Incorrect Answers

A:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Include post-reboot persistence in routing change acceptance. It tests a different symptom: An underlay route vanishes after a leaf is reloaded but returns after a manual CLI edit. For the observed case, the relevant distinction is The static next hop is not being withdrawn or tracked through a supported reachability mechanism, with verification: The failed path leaves the forwarding set while a healthy path remains selected.

C:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Capture selected next hops before and after routing policy deployment. That choice would be more relevant when this different symptom occurs: Traffic follows an unexpected spine after a route-policy update. The present scenario instead points to: The static next hop is not being withdrawn or tracked through a supported reachability mechanism. The correct resolution has its own verification outcome: The failed path leaves the forwarding set while a healthy path remains selected.

D:

At Parkhaven Municipal Networks, while verifying multiple equal-cost paths, this option proposes: Check data-plane path programming whenever peer counts change. This is a valid category of fabric maintenance for another scenario (A network engineer assumes multiple BGP peers automatically imply load-balanced traffic), not the targeted action for Parkhaven Municipal Networks. The distinction is the actual cause: The static next hop is not being withdrawn or tracked through a supported reachability mechanism.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests